Nissan 370Z Forum  

Clay bar, I was a bit sceptical at first.

I put the clay bar to the Z yesterday and I can't believe what a difference it makes to the finish. First I gave it a good wash with the

Go Back   Nissan 370Z Forum > Nissan 370Z Tech Area > Detailing / Washing / Waxing / Cosmetic Maintenance and Repair


Like Tree16Likes

Reply
 
LinkBack Thread Tools Display Modes
Old 06-08-2013, 07:03 PM   #1 (permalink)
Enthusiast Member
 
Join Date: Apr 2012
Location: Milky Way
Posts: 249
Drives: Red Corvette C7
Rep Power: 13
NS370Z is on a distinguished road
Default Clay bar, I was a bit sceptical at first.

I put the clay bar to the Z yesterday and I can't believe what a difference it makes to the finish. First I gave it a good wash with the two bucket system with Adams car wash shampoo. Gave it a good rinse then used the slow flow method to get rid of the major water beads. Then blot dried a few remaining water beads with the waffle weave and got the crevices etc with the Metro Blaster Sidekick. I was amazed at how much extra water came out of the nooks and crannies. I kind of had buyers remorse when I bought the Sidekick but it's a wonderful tool and will be used often. The clay bar and Adams detail spray really cleaned up the finish. Even after washing and appearing spotless I was amazed at how much junk came off with the clay. My Z only sees the occasional cruise, no winter and is garaged at all times unless I take it out for a drive. After claying, I gave it the baggie test and it was as smooth as glass. Anyone wanting to improve the finish before paint correction, waxing etc I would highly recommend claying. Just thought I'd add my 2 cents, just stoked that it made such a difference.
NS370Z is offline   Reply With Quote
Old 06-08-2013, 07:18 PM   #2 (permalink)
Base Member
 
Proshop01's Avatar
 
Join Date: May 2011
Location: Ohio
Posts: 56
Drives: 2011 370Z Roadster
Rep Power: 14
Proshop01 is on a distinguished road
Default

I 2nd that. I clayed my Z a couple of weeks ago. I also clayed, paint corrected, and waxed the wife's Jeep this morning. I love Adam's products.
2xtreme1 likes this.
__________________
2011 Roadster, Gun Metallic, Sport Package, Touring Package, Stillen G3 Cold Air Intake, Fast Intentions SS 18" Resonators CBE, H&R 20mm spacers, Stubby antenna, Z1 Hood Struts, Smart TOP.
Proshop01 is offline   Reply With Quote
Old 06-08-2013, 07:20 PM   #3 (permalink)
A True Z Fanatic
 
w0rM's Avatar
 
Join Date: May 2012
Location: Houston, TX
Posts: 2,198
Drives: 2015 Corvette Z06
Rep Power: 36
w0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond reputew0rM has a reputation beyond repute
Default

I do mine at least once a year. There's no denying the difference it makes in the overall depth of your finish. I'm a believer.
__________________

| SOLD September 14th, 2013 | My Build Journal
w0rM is offline   Reply With Quote
Old 06-08-2013, 07:30 PM   #4 (permalink)
Premium Member
 
SouthArk370Z's Avatar
 
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198
SouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond repute
Default

Great stuff. I still can't figure out why all that crud that gets trapped in the clay doesn't scratch the *** out of the paint.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma
SouthArk370Z is offline   Reply With Quote
Old 06-08-2013, 07:48 PM   #5 (permalink)
A True Z Fanatic
 
Join Date: Aug 2009
Location: N/A
Posts: 76,801
Drives: N/A
Rep Power: 141521
kenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond reputekenchan has a reputation beyond repute
Default

^^ it can, if you're not careful. knead it often and toss dirty areas frequently.
SouthArk370Z and 2xtreme1 like this.
kenchan is offline   Reply With Quote
Old 06-08-2013, 07:50 PM   #6 (permalink)
Premium Member
 
SouthArk370Z's Avatar
 
Join Date: Nov 2010
Location: South Arkansas
Posts: 8,435
Drives: 2014 Challenger
Rep Power: 324198
SouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond reputeSouthArk370Z has a reputation beyond repute
Default

Quote:
Originally Posted by kenchan View Post
^^ it can, if you're not careful. knead it often and toss dirty areas frequently.
I guess I've just been lucky. I'll keep a closer eye on how dirty the clay is from now on. Thanks.
blackcherry20 likes this.
__________________
Steering Lock Links - Search The370Z Bookmarklet - FSM @ NICOclub
Mankind has progressed past the need for war but we haven't evolved that far. - NachoMahma
SouthArk370Z is offline   Reply With Quote
Old 06-08-2013, 11:05 PM   #7 (permalink)
Enthusiast Member
 
2xtreme1's Avatar
 
Join Date: Feb 2012
Location: Eastvale, California
Age: 32
Posts: 494
Drives: 11' 370Z 7 A/T Sport
Rep Power: 13
2xtreme1 is a jewel in the rough2xtreme1 is a jewel in the rough2xtreme1 is a jewel in the rough
Default

Quote:
Originally Posted by SouthArk370Z View Post
I guess I've just been lucky. I'll keep a closer eye on how dirty the clay is from now on. Thanks.
yeah, you have to make sure you fold the clay once one side gets heavily soiled. Also, make sure you maintain your car with a good coat of wax on a regular basis. Doing so, at least in my experience, will cut back on the ammount of clay bar that you will need to use the next time you treat your car. The first time I clayed bar my Z it was heavily soiled, so I picked up a lot from the clay bar. The second time around, when I decided it was time for a clay bar, the paint already seemed really smooth. There was only a few spots here and there, which needed some attention.

( I use my car mostly on weekends, so that could be another reason why on the second time around not much cotaminents were picked up)
2xtreme1 is offline   Reply With Quote
Old 06-09-2013, 11:28 AM   #8 (permalink)
A True Z Fanatic
 
cv129's Avatar
 
Join Date: Jul 2011
Location: Dallas, TX
Posts: 3,222
Drives: 09 Nismo, 16 Nismo
Rep Power: 163995
cv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond repute
Default

Why not the nanoskin autoscrub? Save time better result?
Chuck33079 likes this.
cv129 is offline   Reply With Quote
Old 06-09-2013, 11:44 AM   #9 (permalink)
A True Z Fanatic
 
JARblue's Avatar
 
Join Date: Mar 2011
Location: Austin, TX
Age: 43
Posts: 36,450
Drives: 11 Z34, 98 E36 M3
Rep Power: 2684440
JARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond reputeJARblue has a reputation beyond repute
Default

Quote:
Originally Posted by 2xtreme1 View Post
yeah, you have to make sure you fold the clay once one side gets heavily soiled. Also, make sure you maintain your car with a good coat of wax on a regular basis. Doing so, at least in my experience, will cut back on the ammount of clay bar that you will need to use the next time you treat your car. The first time I clayed bar my Z it was heavily soiled, so I picked up a lot from the clay bar. The second time around, when I decided it was time for a clay bar, the paint already seemed really smooth. There was only a few spots here and there, which needed some attention.

( I use my car mostly on weekends, so that could be another reason why on the second time around not much cotaminents were picked up)
Actually, this is my experience exactly even with the Z as my DD. I got a the Meguiar's Clay kit which comes with two clay bars. The first time I ever clayed, I used almost an entire bar. But the remaining bar and leftovers from the first bar lasted about a year and a half and at least 5 more sessions of clay. Having a nice coat of quality wax makes your car wash much more effective, which in turn keeps the clay cleaner.
2xtreme1 likes this.
__________________

2011 370Z 6MT Sport Gun Metallic | ARC | CJM | Ecutek | FI | Fujimura | R2C | SPL | Stillen | TWM | Z1 | ZSpeed |
JARblue is offline   Reply With Quote
Old 06-09-2013, 12:30 PM   #10 (permalink)
A True Z Fanatic
 
synolimit's Avatar
 
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3389
synolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond reputesynolimit has a reputation beyond repute
Default

I didn't see it and wanted to make something a little clear...you must wax after clay baring since you will have zero protection left besides the clear coat. and you don't want to wax later because then you'll need to clay bar again or you'll be waxing over things stuck in the clear coat.
2xtreme1 and Nick@Adams like this.
__________________
13 370z-
synolimit is offline   Reply With Quote
Old 06-09-2013, 12:43 PM   #11 (permalink)
A True Z Fanatic
 
/Angelo350Z/'s Avatar
 
Join Date: Feb 2013
Location: Germany
Posts: 2,230
Drives: Z34 | MK7 | F82
Rep Power: 3660
/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute/Angelo350Z/ has a reputation beyond repute
Default

Amen. I've been a fan of the claybar since my first Z in '04 got some asphalt overspray. I still claybar every 6 months. I wax immediately though.
__________________

2013 MB NISSAN 370Z SPORT
/Angelo350Z/ is offline   Reply With Quote
Old 06-09-2013, 07:26 PM   #12 (permalink)
Enthusiast Member
 
2xtreme1's Avatar
 
Join Date: Feb 2012
Location: Eastvale, California
Age: 32
Posts: 494
Drives: 11' 370Z 7 A/T Sport
Rep Power: 13
2xtreme1 is a jewel in the rough2xtreme1 is a jewel in the rough2xtreme1 is a jewel in the rough
Default

Quote:
Originally Posted by synolimit View Post
I didn't see it and wanted to make something a little clear...you must wax after clay baring since you will have zero protection left besides the clear coat. and you don't want to wax later because then you'll need to clay bar again or you'll be waxing over things stuck in the clear coat.
Yes, after a clay bar waxing is a must. Clay bar will lift all the nasty stuff off the paint. Laying a coat of wax, will give your paint the protection it needs from the elements.
2xtreme1 is offline   Reply With Quote
Old 06-10-2013, 10:21 AM   #13 (permalink)
The370Z.com Sponsor
 
Nick@Adams's Avatar
 
Join Date: Oct 2012
Location: Indiana
Posts: 618
Drives: Chevy Silverado
Rep Power: 14
Nick@Adams is on a distinguished road
Default

Glad you've "seen the light!"

Claying is a MUST, even on a brand new car.
2xtreme1 likes this.
__________________
Use the code NISSANZ at checkout to save 10% off your next order at AdamsPolishes.com
Nick@Adams is offline   Reply With Quote
Old 06-10-2013, 10:27 AM   #14 (permalink)
A True Z Fanatic
 
Chuck33079's Avatar
 
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539
Chuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond reputeChuck33079 has a reputation beyond repute
Default

Quote:
Originally Posted by cv129 View Post
Why not the nanoskin autoscrub? Save time better result?
My gf just got me one of these for my birthday. I'm looking forward to using it.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent
Chuck33079 is offline   Reply With Quote
Old 06-10-2013, 10:01 PM   #15 (permalink)
A True Z Fanatic
 
cv129's Avatar
 
Join Date: Jul 2011
Location: Dallas, TX
Posts: 3,222
Drives: 09 Nismo, 16 Nismo
Rep Power: 163995
cv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond reputecv129 has a reputation beyond repute
Default

Quote:
Originally Posted by Chuck33079 View Post
My gf just got me one of these for my birthday. I'm looking forward to using it.
Nice!

I first learned about it from a post here (detailing a black RX7)....saw the pic of the guy using a buffer on a wet car, I was like wtf?

Hope to try this in the future
cv129 is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
clay bar!!! SmallermouseZ Detailing / Washing / Waxing / Cosmetic Maintenance and Repair 4 06-16-2012 08:03 AM
Can this or will this end the clay bar? DetailersDomain Detailing / Washing / Waxing / Cosmetic Maintenance and Repair 12 04-27-2012 11:25 AM
Clay bar newb 370zproject Detailing / Washing / Waxing / Cosmetic Maintenance and Repair 33 11-02-2011 10:19 AM
Detail without Clay? daleks Detailing / Washing / Waxing / Cosmetic Maintenance and Repair 4 10-08-2011 03:53 AM
Pinnicle clay bar bigrob126 Detailing / Washing / Waxing / Cosmetic Maintenance and Repair 6 02-14-2011 10:04 PM


All times are GMT -5. The time now is 12:25 PM.


Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2