Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Detailing / Washing / Waxing / Cosmetic Maintenance and Repair (http://www.the370z.com/detailing-washing-waxing-cosmetic-maintenance-repair/)
-   -   Bird droppings etched clearbra (http://www.the370z.com/detailing-washing-waxing-cosmetic-maintenance-repair/65574-bird-droppings-etched-clearbra.html)

sparky 01-13-2013 12:11 AM

Bird droppings etched clearbra
 
Any ideas on how to get this off? Not sure just what I can use on the clear bra that won't damage it worse.

grant 01-13-2013 05:27 PM

How long did you let that crap sit there? I talked with my X-Pel guy today and he didn't think it should have eched the film. Maybe stained it, but that should bleach out, after a while (maybe use some Westly's White polish to help).

sparky 01-13-2013 11:25 PM

Quote:

Originally Posted by grant (Post 2109451)
How long did you let that crap sit there? I talked with my X-Pel guy today and he didn't think it should have eched the film. Maybe stained it, but that should bleach out, after a while (maybe use some Westly's White polish to help).

It was there for the day but was hard to remove. It may be just a stain but I did try a Menzerna fine cut polish on it to no effect. I'll try clay bar to see what that does. Just wasn't sure how aggressive to get on a plastic film. I'll leave it for a while after that and see if it fades.
Thanks for the reply. :tiphat:

Xplicit97 01-14-2013 03:45 AM

Not to thread Jack but I have the same problem with mine except it's from.giant bugs on a road trip from WA to Cali.. any suggestions or am I SOL as well

Sent from my SPH-L710 using Tapatalk 2

DEpointfive0 01-14-2013 05:06 AM

Quote:

Originally Posted by Xplicit97 (Post 2110081)
Not to thread Jack but I have the same problem with mine except it's from.giant bugs on a road trip from WA to Cali.. any suggestions or am I SOL as well

Sent from my SPH-L710 using Tapatalk 2

Still in CA?


I used aggressive clay bar, and it takes crap out, as for ACTUAL etching... I haven't seen it

Xplicit97 01-14-2013 06:42 AM

I am came.back down for work again.. minus the Z this time. Too short of trip and the passes are seriously nasty right now

Quote:

Originally Posted by DEpointfive0 (Post 2110087)
Still in CA?


I used aggressive clay bar, and it takes crap out, as for ACTUAL etching... I haven't seen it



Sent from my SPH-L710 using Tapatalk 2

kenchan 01-14-2013 11:39 AM

UV can do wonders sometimes.


All times are GMT -5. The time now is 08:43 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2