Junkman's "How to Completely Repair Your Paint Damage - The Videos!

Junkman2008

So why didn't you try doing this with Adam's products? A lot less trial and error when you use my videos as a template.

__________________
"Marines - Making the other guy die for his country for over 200 years."

kree

Well, next time I'd get Adam's clay for sure. And I might buy Adam's car wash liquid too. Basically, I wanted to use the DA Microfiber system b/c I heard amazing things about it and I liked the handle on the Griot's vs. the Porter Cable.

Junkman2008

I have no clue as to what you mean by the "DA microfiber system". Who's product are you talking about?

__________________
"Marines - Making the other guy die for his country for over 200 years."

kree

Meguiar's has a new system that uses microfiber polishing pads and is made for DA machines only, no rotary. It comes as a kit or you can get the pieces separately. I bought the 5" starter kit. Apparently, they've been developing this for years now and has a lot of research and development time. From everything I've read and seen online it is faster, has less dust, and is easy for a novice to use as well. There's a lot of info on it even though its pretty new if you search "DA Microfiber System" on google. Also, here is a video on it:
YouTube - Autogeek.net - New Meguiars Microfiber DA System

Junkman2008

Hmmmm.... the first question I have is whether or not their microfiber is made in China. They won't say so if it is. Another thing, why doesn't anyone use a jacked up car like I do? I can make a showroom car shine like glass using cat turds. Nobody wants to use a "realistically" damaged car. Are they afraid of what their products can't do?

__________________
"Marines - Making the other guy die for his country for over 200 years."

tomnavone

Here are some damaged cars. Looks like an interesting system. It comes with a compound and a wax. It is supposed to work faster and less mess than the the foam pads

Review: Meguiar's DA Microfiber System - Auto Geek Online Auto Detailing Forum

Before and After Shots - Meguiar’s DA Microfiber Polishing System - Auto Geek Online Auto Detailing Forum

Review: Meguiar's DA Microfiber Buffing Pads!!! - Truth In Detailing Auto Detailing Forum

Meguiar's DA Microfiber System FAQ/Q+A - Truth In Detailing Auto Detailing Forum

__________________
GTM Supercharger/HKS Camp2/Berk cbe/Motordyne art pipes/Hotchkis sways/ Eibach Springs/ Black Volk TE37/Bridgestone S-04
Powered by

Junkman2008

So what is the product in the bottles?

__________________
"Marines - Making the other guy die for his country for over 200 years."

tomnavone

A correction compound and a finishing wax

__________________
GTM Supercharger/HKS Camp2/Berk cbe/Motordyne art pipes/Hotchkis sways/ Eibach Springs/ Black Volk TE37/Bridgestone S-04
Powered by

Junkman2008

I understand that, but what's it called? Is it a M105/205 blend and then a glaze? I'd like to know what the bottles contain because I have a Mirror Glaze distributor about 3 miles up the road.

__________________
"Marines - Making the other guy die for his country for over 200 years."

tomnavone

Its not m105/205. But u can use m105/205 with the mf pad. Supposedly its a new product line to be used with the microfiber pads

__________________
GTM Supercharger/HKS Camp2/Berk cbe/Motordyne art pipes/Hotchkis sways/ Eibach Springs/ Black Volk TE37/Bridgestone S-04
Powered by

Junkman2008

Hell, M105/205 is easy enough to use with no dusting whatsoever. Plus, you can remove some serious stuff with M105. That stuff finishes down nicely and M205 compliments it very well. Are they reinventing the wheel? That's a common theme I hear with novice Meguiar's users. There is so much to choose from that they get confused. I understand their issue.

__________________
"Marines - Making the other guy die for his country for over 200 years."

Arc

Well, I got my new 370Z last week, and after about 120+ miles, it has a scratch on the hood and two dust particle paint chips. I don't know what's the the easiest way to fix the tiny paint chips or if I should just ignore it.

Also the car got wet when I brought it home, so I just grabbed some towels and dried it off. I didn't know about what type of towels to use, so you can imagine what I just did without knowing it. Now I have some swirls to deal with.

I've watched the 10 videos and they're very helpful but I do have some questions.

1. The Porter Cable and the foam pads on the Adam's site should all be compatible right? The Porter Cable and the foam pads are listed with different sizes.

2. If I were to polish and seal, I would need to tape off the car lines and glass?
How would I tape the lines? Like what would taping the lines look like exactly without covering the area I want to work on?
What kind of tape can I use that won't scratch the protected surfaces and won't leave any residue?

3. To keep the Porter Cable from overheating, I'd need an extension cable that is twice as thick as the Porter Cable's cord? Is that right? I didn't understand what you meant in the video.

I'll need to get a foam gun before I start this process myself. I'll look on Amazon.com for one.

I have access to two practice vehicles before I go full on my 370Z, so I'll test it on those two first.

I'm about to make my order, as soon as I find a foam gun and some masking tape. This process is looking more involved and complicated somewhat than I expected. Now I need a leaf blower to air dry it too. So much to do.

Junkman2008

First off, you've just watched 1 hour and 20 minutes worth of videos. You are overwhelmed with information overload. You need to stop, take a breath and watch these videos again, as well as the other ones below the first 10. There is no possible way that you are going to retain all of the information that you've just seen, nor does it all make sense to you at this point. The more you watch the videos, the more clear this will become. Also, the more you watch the videos, the simplier this will all be.

The main reason that I used Adam's in these videos is not only because they work, it's because they are also the easiest product line to use and understand. Thus, you need to take a break, grab a sandwich and watch them again. You will learn a lot more the second time around. Now let's address your post directly.

Google Langka and Dr. Colorchip. They both address the easiest way to repair paint chips. Either product will work. You have some reading to do. As for the scratch, the process you see in my paint correction videos (the ones below the first 10), is how you deal with scratches and swirls, as well as haze and dullness.

Again, that second set of videos deal with this issue.

The pads listed on the Adam's site come in 2 sizes. The 4" pads, which are used to get into very tight areas and also the larger pads, which are used to buff the rest of the car. Although the smaller pads come in handy, guess which ones you need to do most of the car? That's right, the bigger pads. Now your choice just got easier.

That is not necessary at all. If you get polish somewhere that you shouldn't have, just wipe it off. It will not damage anything. Just don't expect it to come off easy if you leave it on for 3 months while your car bakes in the sun. Address the problem immediately.

Now you know that taping is not necessary. However, if you do decide to tape off something (like an emblem), blue painter's tape is what you want to use. It comes in various widths, and is safe for all finishes. By the way, buffing over your emblems will tear up your pads so don't do that and avoid buffing up against any sharp edges. That will rip chunks out of your pads also.

Then maybe you will understand Porter-Cable's chart on cord lengths.



There it is in black and white. You look at the length of the cord you need to run and the chart tells you exactly what gauge it should be. These are the minimum gauge lengths. You can always use a larger gauge than what they recommend, but definitely not smaller.. Simple.

You can also check with these Adam's dealers to see if any of them have one also. There may be one listed in your state.

Good idea, although you have nothing to worry about concerning the PC. How do I know this? Watch these two videos. They will easily put your mind at ease concerning the PC.

Another piece of advice that you want to adhere to. Pick a 2' by 2' spot on the car you want to practice on. Do the complete process on that spot. See if you can get the results you want in that one spot. If you can't, ask questions and keep practicing. If you can't get one spot right, then you won't get the rest of the car right. Thus, you don't want to apply a crappy technique to the entire car until you have an effective technique. Using a ineffective technique does nothing but waste product, time and you end up frustrated with the outcome. So learn the process in one spot, and then apply what you've learned to the entire car.

You shouldn't look at it as being complicated, you should look at each part of the process as, "Wow, that makes sense! Why wasn't I already doing this?" If that is not the way you see the entire process, then you haven't watched the videos enough times. Once you do trust me, the process will make a ton of sense.

__________________
"Marines - Making the other guy die for his country for over 200 years."

Arc

Thanks for the reply Junkman2008! I very much appreciate your knowledge base!

I plan on downloading your video tutorials here and watching them again. I'm already trying to remember the steps so I get used to it and don't make mistakes. I'm one of those types that follow instructions to the Nth detail. Sometimes it's OCD, LOL!

You've pretty much answered all my questions about the porter cable, paint fixes, foam pad size, masking tape issues, and how to start off on a small spot of the car to practice. I'm sure I'll have some more questions down the road and it's good to see that the Junkman2008 is here to help newcomers like me, heheh .

I'm off to watching your videos again since I have more time and more bandwidth for it.

Junkman2008

I'm here if you need me.

__________________
"Marines - Making the other guy die for his country for over 200 years."