Excellent thread! Thanks ak!!!
|
|
LinkBack | Thread Tools | Display Modes |
05-30-2012, 10:45 PM | #17 (permalink) |
Base Member
Join Date: Apr 2012
Location: Yorktown, VA
Posts: 173
Drives: 12 370Z GM 7ATS NavS
Rep Power: 13 |
After reading all the above, I have decided to build a large box out of inch-thick plexiglas and seal my Z inside in a nitrogen atmosphere. I'll never drive it again...too much work to clean it!
|
06-03-2012, 11:23 PM | #18 (permalink) |
Base Member
Join Date: May 2012
Location: palm coast, fl.
Posts: 6
Drives: 2012 black nismo
Rep Power: 13 |
finally decided on the porter cable buffer /sander.then had to buy a hook and loop backing plate, polishing hook and loop pad, micro fiber pads, and cleaning solution for the pads and finally a spur.
did i miss anything? |
05-16-2013, 03:33 PM | #19 (permalink) |
Track Member
Join Date: Nov 2008
Location: San Francisco
Posts: 846
Drives: 991.2 GT3
Rep Power: 18 |
Really great info in here! Thanks AK
__________________
350z / 40th 370z / C6 Z06 / BMW M4 / V10 R8 / C7 Grand Spot / 997.1 GT3 / S2K / Camaro ZL1 / 718 GTS / 991.2 GT3 |
07-15-2013, 07:37 PM | #20 (permalink) |
Base Member
Join Date: May 2013
Location: Dayton
Age: 37
Posts: 24
Drives: '13 Nissan 370z Tour
Rep Power: 12 |
Foam vs. normal washing
I was thinking about investing in a sprayer and doing foam washes instead of a normal wash with a sponge/mit. I know foaming has the advantage of not rubbing particles into the paint but will it clean just as effectively?
|
05-26-2015, 02:21 PM | #22 (permalink) |
Enthusiast Member
Join Date: Oct 2014
Location: Indiana
Posts: 262
Drives: 15Nsmo/99 EclipseGST
Rep Power: 11 |
Headlight restoration kit from autoparts store. You will need to sand first with varying grits of sand paper and follow with a polish. The 3M kit that I got included an attachment for a drill and the polish. All items needed and instructions came with the kit.
It depends on how bad your headlights are but the ones I have done so far came out great. |
07-07-2015, 03:23 AM | #24 (permalink) |
A True Z Fanatic
Join Date: Nov 2014
Location: South Carolina
Age: 58
Posts: 15,204
Drives: 13’ 370Z TS 7A/T
Rep Power: 2684395 |
i read through the article-good stuff! i know it's probably in there,but may have overlooked it,,,waterspots on exterior glass & a mold looking stuff on upper exterior door trim & below small rear glass.
ty,joby
__________________
MazWorx built long block | FI-TT-100 Stage 2.75 | IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html |
11-05-2022, 07:40 PM | #27 (permalink) |
Base Member
Join Date: Mar 2013
Location: Los Angeles
Posts: 30
Drives: 2013-370Z-Black-MT
Rep Power: 12 |
I may have missed it but what kind of cleaner would you use for the non-leather dash? For example, is the Armor all original protectant good?
Thank you in advance |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
Official GO PRO HD 370Z Owners Thread:Mounting Tips, tricks, Pictures, Videos Inside | AK370Z | Exterior & Interior | 209 | 02-07-2020 12:12 PM |
15 Amazing Science Facts | nogoodname | The Lounge (Off Topic) | 19 | 09-04-2012 11:54 AM |
Tips and Tricks | 370zproject | Nissan 370Z General Discussions | 19 | 02-09-2010 03:23 PM |