FS: INGS+1 Front lip, Carbon Fiber Pod cover, EVO-R Diffuser etc

TheGreatOne · 08-07-2014, 01:39 AM

Hey guys,

I'll be in Ontario this Friday and Saturday. I'll be around Vaughn, Downtown and at Luciano's awesome car show at Pearson.

Sadly sold my Z last week, couple things I never installed or had a chance to take off before the sale.

Ideally like to sell it to my Canadian brothers close by before worrying about shipping to the rest of Canada or US

Carbon Signal Carbon Fiber Gauge Covers - $100 SOLD

Condition 9.5/10

Near perfect, small little chip that I have pictured here, as you can see, you can barely see it lol. Outside of that, mint

Kelly Fields Hydraulic Hood Props - $80 - SOLD

Brand new never installed. Nissan should never have cheaped out and had these stock for our cars

Neo-chrome Tow Hook - $50 SOLD Had to give it to the buyer....grrrr

Really hard to find this style for the Z.

EVO-R Rear Diffuser in FRP - $180 (New $280) SOLD

Never installed, bought from another member who was a bit anal on fitment. As known on the forums EVO-R products can be hit or miss sometimes fitment wise...below is my test fit. Looked pretty good to me, but priced low anyways.

Typically needs screws and double sided tape.

INGS+1 Replica Front Lip - $200 - SOLD

Brand new, never installed. I've bought 3 of them lol. Sold 1st, damaged the 2nd one and then bought this over winter to install. Including pic from the one I had installed

40th Anniversary Floor Mats - $50

Brand new. 10/10

Refresh your 40ths interior. Still in packaging. Driver and Passenger

Mishimoto Oil Cooler - $160

Used. Bought off another member who had it over a year. Goes for $600 new. Priced low since its used also because I don't have the 3 brackets. I was just going to make my own. Outside of that, functioning great.

Carbon Fiber License Frame - $20

Real 2 x 2 twill. New, never installed.

If u want anything and want to meet up shoot me a PM or email 370zsean@gmail.com

Jesus...my email isn't going to make sense anymore lol.

Asheth · 08-07-2014, 02:27 AM

Where did you get your ing+1 lip? I'm really thinking of getting that lip.

cooltoy · 08-07-2014, 10:12 AM

Any chance for a picture of the frame, or a link to a similar one? Thank you.

TheGreatOne · 08-07-2014, 10:51 AM

Quote:

Originally Posted by Asheth

Where did you get your ing+1 lip? I'm really thinking of getting that lip.

You can get the same lip from Nextmod in Toronto if they have it in stock.

TheGreatOne · 08-07-2014, 11:18 AM

Quote:

Originally Posted by cooltoy

Any chance for a picture of the frame, or a link to a similar one? Thank you.

I'll take an actual pic tonight. I found some online but they look like poop.

cooltoy · 08-07-2014, 11:26 AM

I just want to see how much of the stickers it covers up.

Tran905 · 08-07-2014, 01:13 PM

Awesome parts man, sorry to hear you sold the Z.

How was fitment on the front lip? Could ya PM or post some more shots of the front end with the lip installed.

Would be interested in the lip and diffuser if you're willing to ship. I'm just in St. Catharines, Ont.

Ire · 08-07-2014, 03:20 PM

ill take the oil cooler and plate frame holders. ill be at pearson for the show so bring them and ill pay you there

Amuse370z · 08-07-2014, 05:31 PM

Damn, I'm kinda interested in the tow hook, I originally wnated a toe strap...but...

TheGreatOne · 08-07-2014, 11:47 PM

Quote:

Originally Posted by Ire

ill take the oil cooler and plate frame holders. ill be at pearson for the show so bring them and ill pay you there

I'll bring them to the show, no problem

TheGreatOne · 08-07-2014, 11:51 PM

Quote:

Originally Posted by Tran905

Awesome parts man, sorry to hear you sold the Z.
How was fitment on the front lip? Could ya PM or post some more shots of the front end with the lip installed.

Would be interested in the lip and diffuser if you're willing to ship. I'm just in St. Catharines, Ont.

Thanks man, still hurting after the sale

Someone has dibs on the lip but if falls through I would ship....

Lip fitment was pretty damn good. I installed it myself the first time...used self tapping screws

pics of the lip

cooltoy · 08-08-2014, 12:06 AM

Quote:

Originally Posted by TheGreatOne

I'll bring them to the show, no problem

So I guess I am SOL?

Tran905 · 08-08-2014, 12:08 AM

Wow that first pic looks badass, sooo nice.

Lemme know if sale falls through!

PS Any idea how much it'd cost to ship the diffuser and/or lip?

Boomer370 · 08-08-2014, 08:31 AM

Quote:

Originally Posted by Tran905

Wow that first pic looks badass, sooo nice.

Lemme know if sale falls through!

PS Any idea how much it'd cost to ship the diffuser and/or lip?

I'll be at the Pearson Show, would like to know cost of Diffuser also.

TheGreatOne · 08-08-2014, 06:32 PM

Quote:

Originally Posted by Tran905

Wow that first pic looks badass, sooo nice.

Lemme know if sale falls through!

PS Any idea how much it'd cost to ship the diffuser and/or lip?

Hmmm not sure but Its not crazy heavy, just more the shape...probably in the $20 something range

08-07-2014, 01:39 AM	#1 (permalink)
TheGreatOne A True Z Fanatic Join Date: Jan 2011 Location: Montreal, Canada Age: 46 Posts: 1,980 Drives: E60 BMW M5 Rep Power: 21	FS: INGS+1 Front lip, Carbon Fiber Pod cover, EVO-R Diffuser etc Hey guys, I'll be in Ontario this Friday and Saturday. I'll be around Vaughn, Downtown and at Luciano's awesome car show at Pearson. Sadly sold my Z last week, couple things I never installed or had a chance to take off before the sale. Ideally like to sell it to my Canadian brothers close by before worrying about shipping to the rest of Canada or US Carbon Signal Carbon Fiber Gauge Covers - $100 SOLD Condition 9.5/10 Near perfect, small little chip that I have pictured here, as you can see, you can barely see it lol. Outside of that, mint Kelly Fields Hydraulic Hood Props - $80 - SOLD Brand new never installed. Nissan should never have cheaped out and had these stock for our cars Neo-chrome Tow Hook - $50 SOLD Had to give it to the buyer....grrrr Really hard to find this style for the Z. EVO-R Rear Diffuser in FRP - $180 (New $280) SOLD Never installed, bought from another member who was a bit anal on fitment. As known on the forums EVO-R products can be hit or miss sometimes fitment wise...below is my test fit. Looked pretty good to me, but priced low anyways. Typically needs screws and double sided tape. INGS+1 Replica Front Lip - $200 - SOLD Brand new, never installed. I've bought 3 of them lol. Sold 1st, damaged the 2nd one and then bought this over winter to install. Including pic from the one I had installed 40th Anniversary Floor Mats - $50 Brand new. 10/10 Refresh your 40ths interior. Still in packaging. Driver and Passenger Mishimoto Oil Cooler - $160 Used. Bought off another member who had it over a year. Goes for $600 new. Priced low since its used also because I don't have the 3 brackets. I was just going to make my own. Outside of that, functioning great. Carbon Fiber License Frame - $20 Real 2 x 2 twill. New, never installed. If u want anything and want to meet up shoot me a PM or email 370zsean@gmail.com Jesus...my email isn't going to make sense anymore lol. __________________ 2017 SUBARU STI 2008 E60 M5 - SOLD 2010 40th Anniversary 370Z - SOLD (and missing her) Last edited by TheGreatOne; 08-13-2014 at 05:59 PM.

08-07-2014, 02:27 AM	#2 (permalink)
Asheth Track Member Join Date: Dec 2008 Location: Glen Burnie, Maryland Posts: 917 Drives: 09 Blk 6mt Rep Power: 17	Where did you get your ing+1 lip? I'm really thinking of getting that lip. TheGreatOne likes this. __________________ 180 customs Headlights - Yantech Backup Camera - Projekt 1 - Stillen Gen 3- EVO-R V2 Foglight, EVO-R CF Diffuser, Carbon Fiber Element Steering wheel - Fast Intentions TDX/RHFC's - RJM A.F.P. - Z1 Oil Cooler - 2015 Nismo Conversion.

08-07-2014, 10:12 AM	#3 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Any chance for a picture of the frame, or a link to a similar one? Thank you. TheGreatOne likes this. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-07-2014, 11:26 AM	#6 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	I just want to see how much of the stickers it covers up. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

08-07-2014, 03:20 PM	#8 (permalink)
Ire Track Member Join Date: Sep 2011 Location: Toronto Posts: 785 Drives: 09 MB Rep Power: 17	ill take the oil cooler and plate frame holders. ill be at pearson for the show so bring them and ill pay you there TheGreatOne likes this. __________________ Advan Racing, KW, GTHaus, Eibach, Berks, Injen, Motul, K&N, SPC, Sunline Racing, Z1, Evo-R, Aerojacket, Stoptech, Amuse Powerhouse, Defcon Racing, Fly1 Motorsports. pics

08-07-2014, 01:13 PM	#7 (permalink)
Tran905 Base Member Join Date: Dec 2012 Location: Niagara Falls, ON Posts: 148 Drives: 2010 370Z 40th Rep Power: 12	Awesome parts man, sorry to hear you sold the Z. How was fitment on the front lip? Could ya PM or post some more shots of the front end with the lip installed. Would be interested in the lip and diffuser if you're willing to ship. I'm just in St. Catharines, Ont.

08-07-2014, 05:31 PM	#9 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 16	Damn, I'm kinda interested in the tow hook, I originally wnated a toe strap...but... __________________ [Powerhouse Amuse] [HKS] [Volk Racing] [KW Suspensions] [Eibach] [SPL] [TRS] [EVO-R] [NISMO]

08-08-2014, 12:08 AM	#13 (permalink)
Tran905 Base Member Join Date: Dec 2012 Location: Niagara Falls, ON Posts: 148 Drives: 2010 370Z 40th Rep Power: 12	Wow that first pic looks badass, sooo nice. Lemme know if sale falls through! PS Any idea how much it'd cost to ship the diffuser and/or lip? TheGreatOne likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Carbon fiber diffuser, carbon fiber fang cover	mag_black	Parts for sale (Private Classifieds)	12	01-31-2014 10:16 PM
[WTB] INGS+1 N-Spec Carbon Fiber Front Lip	pty370z	Parts for sale (Private Classifieds)	1	08-02-2012 08:52 PM
[WTB] EVO-R front carbon fiber fang cover	INNOVATE_1	Parts for sale (Private Classifieds)	1	08-02-2011 03:49 PM
[FOR SALE] EVO-R front carbon fiber fang cover and B pillars	Danny3.7	Parts for sale (Private Classifieds)	5	08-01-2011 10:15 PM
carbon fiber front liecense area cover	darkseed	Nissan 370Z General Discussions	9	03-05-2010 07:55 AM