armytrix valvetronic exhaust

Jaredo13! · 05-01-2014, 09:33 PM

Quote:

Originally Posted by Marcusz

Anyone have this in canada yet,im thinking about getting this,it sounds awsome

so i finally got my car back and man am i pleased. i was skeptical seeing how nobody on the forum had it yet and i was gonna be the Guinea pig but it sounds amazing!!!! with the valves closed it sounds pretty much like my stock nismo exhaust sounded but with a little more rumble i guess you can say. with the valves open it screams. it honestly surprised me how loud it was and not just loud but a nice deep tone to it. i still need to get it tuned in the next few weeks so i dont know the exact gains but i can tell a difference thats for sure. so all in all i am very pleased and i say do it. hands down! i will post my write up thread on it after i get some video to put on here

Luciano13 · 05-01-2014, 09:53 PM

Quote:

Originally Posted by Jaredo13!

so i finally got my car back and man am i pleased. i was skeptical seeing how nobody on the forum had it yet and i was gonna be the Guinea pig but it sounds amazing!!!! with the valves closed it sounds pretty much like my stock nismo exhaust sounded but with a little more rumble i guess you can say. with the valves open it screams. it honestly surprised me how loud it was and not just loud but a nice deep tone to it. i still need to get it tuned in the next few weeks so i dont know the exact gains but i can tell a difference thats for sure. so all in all i am very pleased and i say do it. hands down! i will post my write up thread on it after i get some video to put on here

make a video

DEpointfive0 · 05-01-2014, 10:00 PM

Quote:

Originally Posted by Jaredo13!

I actually ordered it and am installing it tomorrow on my 2010 nismo! it was a little over 2k with high flow down pipes and I always liked valves on exhaust. Thought it was cool that you can have open close or auto. The auto function is vacuum triggered at 3500 rpms like the new corvette. so I said screw it and will be the tester! I should have my car back around noon tomorrow and will post a thread on how it really sounds and what my gains are after my tune wish me luck haha.. Someone had to try it so I figured why not. I did have to wire the money but everything came within a week from Hong Kong.

Quote:

Originally Posted by alcheng

ya.... say that with chinese accents, it sounds even sexier...

I can't believe someone spent $2000+ for a Chinese made exhaust, LOOOOOL

Glad someone has too much money to burn. Btw, you can add a manual exhaust valve to any exhaust for $140. I'm sure someone can make it electronic for you, AND you won't have to buy a sketch Chinese exhaust

Sorry, I'm considering HK to be China, at least I'm not saying all of Asia is China

JARblue · 05-02-2014, 07:40 AM

Quote:

Originally Posted by DEpointfive0

I can't believe someone spent $2000+ for a Chinese made exhaust, LOOOOOL

Glad someone has too much money to burn. Btw, you can add a manual exhaust valve to any exhaust for $140. I'm sure someone can make it electronic for you, AND you won't have to buy a sketch Chinese exhaust

Sorry, I'm considering HK to be China, at least I'm not saying all of Asia is China

An electric valve will run you ~$250 (QTP).

FPenvy · 05-02-2014, 08:32 AM

Quote:

Originally Posted by DEpointfive0

I can't believe someone spent $2000+ for a Chinese made exhaust, LOOOOOL

Glad someone has too much money to burn. Btw, you can add a manual exhaust valve to any exhaust for $140. I'm sure someone can make it electronic for you, AND you won't have to buy a sketch Chinese exhaust

Sorry, I'm considering HK to be China, at least I'm not saying all of Asia is China

Quote:

Originally Posted by JARblue

An electric valve will run you ~$250 (QTP).

i mean i wanted to mention this.......but i felt bad and let him go on his own path.

and QTP even has wireless remotes that can go on your key chain lol

could have went quality exhaust, modded the TPs with QTP valves, and had money for more mods.

to each their own. i know the excitment in having something no one else does though.

DEpointfive0 · 05-02-2014, 10:44 AM

Quote:

Originally Posted by JARblue

An electric valve will run you ~$250 (QTP).

Quote:

Originally Posted by FPenvy

i mean i wanted to mention this.......but i felt bad and let him go on his own path.

and QTP even has wireless remotes that can go on your key chain lol

could have went quality exhaust, modded the TPs with QTP valves, and had money for more mods.

to each their own. i know the excitment in having something no one else does though.

I figure I'll never drive through NM again...

Link to an electronic valve? Why mod the TPs? They don't have one that goes between the flanges?
My buddy's manual one went between the flanges in the Y-pipe so it only needed 1, and it was easy to manipulate

JARblue · 05-02-2014, 10:54 AM

Quote:

Originally Posted by DEpointfive0

Link to an electronic valve? Why mod the TPs? They don't have one that goes between the flanges?
My buddy's manual one went between the flanges in the Y-pipe so it only needed 1, and it was easy to manipulate

QTP » Electric Exhaust Cutouts

As far as I know, there is some welding required for installation.

FPenvy · 05-02-2014, 10:54 AM

Quote:

Originally Posted by DEpointfive0

I figure I'll never drive through NM again...

Link to an electronic valve? Why mod the TPs? They don't have one that goes between the flanges?
My buddy's manual one went between the flanges in the Y-pipe so it only needed 1, and it was easy to manipulate

QTP Â» Welcome to Quick Time Performance Online

DEpointfive0 · 05-02-2014, 10:59 AM

Quote:

Originally Posted by JARblue

QTP » Electric Exhaust Cutouts

As far as I know, there is some welding required for installation.

Grassy áss

By the looks of it, some wouldn't need to be welded in

Chuck33079 · 05-02-2014, 11:03 AM

Electric cutout motors have a high failure rate. And they always seem to fail halfway closed so it sounds like complete ***.

FPenvy · 05-02-2014, 11:04 AM

Quote:

Originally Posted by Chuck33079

Electric cutout motors have a high failure rate. And they always seem to fail halfway closed so it sounds like complete ***.

why do we why we fall bruce.....

to pick ourselves up and go straight pipes

JARblue · 05-02-2014, 11:06 AM

Ooops... you're right. I was looking at the kit that included the y-pipe.

And yeah, they tend to fail without proper maintenance. QTP recommends monthly lubrication of the butterfly valve. Yeah right

FPenvy · 05-02-2014, 11:08 AM

Quote:

Originally Posted by JARblue

Ooops... you're right. I was looking at the kit that included the y-pipe.

And yeah, they tend to fail without proper maintenance. QTP recommends monthly lubrication of the butterfly valve. Yeah right

monthly?! sheeeeetttt i lubricate daily

DEpointfive0 · 05-02-2014, 11:10 AM

Quote:

Originally Posted by Chuck33079

Electric cutout motors have a high failure rate. And they always seem to fail halfway closed so it sounds like complete ***.

And the armytrix one operates on vacuum if I read it somewhere correctly? Or does the vacuum trigger the electric motors?

Chuck33079 · 05-02-2014, 11:12 AM

The vacuum operated ones kinda work like an internal wastegate on a turbo. It's sprung open and the vacuum sucks it shut. The electric ones are just motorized butterflies.

05-02-2014, 11:03 AM	#40 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Electric cutout motors have a high failure rate. And they always seem to fail halfway closed so it sounds like complete ***. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

05-02-2014, 11:06 AM	#42 (permalink)
JARblue A True Z Fanatic Join Date: Mar 2011 Location: Austin, TX Age: 43 Posts: 36,450 Drives: 11 Z34, 98 E36 M3 Rep Power: 2684440	Ooops... you're right. I was looking at the kit that included the y-pipe. And yeah, they tend to fail without proper maintenance. QTP recommends monthly lubrication of the butterfly valve. Yeah right __________________ 2011 370Z 6MT Sport Gun Metallic \| ARC \| CJM \| Ecutek \| FI \| Fujimura \| R2C \| SPL \| Stillen \| TWM \| Z1 \| ZSpeed \|

05-02-2014, 11:12 AM	#45 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	The vacuum operated ones kinda work like an internal wastegate on a turbo. It's sprung open and the vacuum sucks it shut. The electric ones are just motorized butterflies. DEpointfive0 likes this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
armytrix exhaust?	370zleeper	New 370Z Owner	29	05-07-2018 01:54 PM
ArmyTrix F1 Exhaust system	Riptide67	Intake/Exhaust	57	03-06-2016 12:36 PM
Nissan 370Z incredible sound with STILLEN superchargers & Armytrix SuperSport Exhaust	370Zpetrohead	Nissan 370Z Photos / Spyshots / Video / Media Gallery	14	10-30-2014 01:30 PM
Finally Got my exhaust! HKS Hi-Power Ti Exhaust (many Pics, Video inside AK370Z)	AK370Z	Intake/Exhaust	102	05-11-2013 02:32 PM
AAM Comp. Exhaust Sale: 2.5" and 3'' True Dual Exhaust Exhaust, HFC and Test Pipes!	Rob@Altered	Exhaust/Intake	33	04-02-2012 08:03 PM