370Z on Lightspeeds Dyno

Sylvan Lake V

Yesterday there was a 370Z on Lightspeed Innovations dyno in RedDeer Was it a member here (i could give a description and owners name in case he dosent want to share I wont do that) and if so do you care to share your mods and dyno numbers?

__________________
2003 G35TT JWT twin turbo 850bb kit tuned to 589whp & 609trq by Lightspeed Innovations
http://www.canibeat.com/2010/07/the-...form-function/

Chinook

It was me, I have most of Stillens bolt on's (gen3 cai, headers, cbe, hfc's, pulley) Not quite the numbers I was hopeing for, tuned with Cobb access port. Final numbers were 305hp, and 239ftlbs torque. Like I said a bit dissapointing however I gained 13 ftlbs at 2600rpm and he really cleaned up the air fuel ratio. Base run before tune was 300hp, and 232ftlbs torque. Numbers don't show it but it seems to climb thru the rpm band with a lot less effort, very smooth. How'd you know I was there?

__________________
09 Touring/Nav 6MT Carbon Silver STS Turbo

Sylvan Lake V

I have been good friends with Cam for years I am buddies with his guys as well. I was there today wrapping up some crap on my car and seen your graph it looked really good (and I see alot dyno sheets come out of their over the years), not huge WHP gains but the torque under the curve gains looked great I bet it pulls alot harder now. I have heard from quite a few G35 guys they were disappointed in the numbers they got, don't forget we are at a much higher altitude than many of the Dynos you see here on the forums. The guys at Lightspeed seemed very impressed with your car.


You may have only minimal gains at peak but the numbers under the curve looked like a 20-26ft/lb (it might be more or less I just had a quick look while looking for one of my graphs) gain and thats why it seems to climb way harder through the rpms. I will take gains under the curve over peak gains I have rode in lots of cars before and after tuning the ones that impress me the most seem to be the ones that make large gains under the curve, they seem to pull much harder. A friend of mine just his EVO 9 tuned and it was similar to yours not huge gains at peak but under the curve was good the car felt like a totally different animal after the tune.

__________________
2003 G35TT JWT twin turbo 850bb kit tuned to 589whp & 609trq by Lightspeed Innovations
http://www.canibeat.com/2010/07/the-...form-function/

Chinook

So true, pulls a lot harder now a lot more fun to drive can't wait till the sun comes out! I checked out pics of your car, nice job looks good and I'm sure it flies.

__________________
09 Touring/Nav 6MT Carbon Silver STS Turbo

Snakes709

Was it Cam that tuned you? I'll be going to him sometime this summer to tune my nitrous if i can ever find 1 step colder spark plugs.

__________________
2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress.
Sponsor: DSG Performance

Jordo!

Scan of dyno? Curious to see where power was gained.

__________________
Enjoy it. Destroy it.

Josh@STILLEN

Tuning with that setup seems right on par.. the biggest thing with the combo of the bolt-ons and especially the HFCs and Headers is rounding out the air/fuel ratio.. glad you jumped on that.

What was the baseline before the mods?

Zat_Zuma

It will be interesting to compare the results when I book my time with Cam to have a Cobb tune as well. I have a few different manufacturers of
bolt-ons compared to yours.

The only Stillen product I will have is the power steering cooler and maybe the Stillen oil cooler (only if RCZ gets off his *** and gets it off his car and sells it to me ..... sooner is better than later )

I've decided to tune the Zuma before the "other goodies" arrive

I'll give ya a PM when that time is booked

__________________
[B]2009 & 2017 370Z Touring Sport Autos SOLD

djpathfinder

Cool! Wanna share your dyno charts here?

I've tried to go on their website a few times for weeks and it seems to be always down.

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD

Chinook

Posted pictures with charts on my profile

__________________
09 Touring/Nav 6MT Carbon Silver STS Turbo

Chinook

I didn't have a chance to dyno before adding parts as I had the cbe, and cai ordered before taking delivery of my car

__________________
09 Touring/Nav 6MT Carbon Silver STS Turbo

Snakes709

damn i thought i started modding my car early...


btw, just looked at your dyno graph. That torqure, uh, curve is all over the place.

Heres mine with G3's. The curve, well it really isnt a curve.

__________________
2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress.
Sponsor: DSG Performance

Jordo!

Sure it is -- a nice platykurtic curve. Exactly what you want to see

__________________
Enjoy it. Destroy it.

Snakes709

his shouldnt be that jumpy, should be smooth like mine or at least smooth increasing curve.

__________________
2011 Evo-GSR AMS 2.4 stroker/ bore, FP Black build in progress.
Sponsor: DSG Performance

djpathfinder

Platy-wha???

The before and after torque curves are similar, even though there are many "oscillations"...wonder why there were so many of them.

__________________
2012 GT-R Black Edition Jet Black
2010 370Z 40th Anniversary // SOLD