Alberta owners turbo interest?

Boosted Performance · 02-22-2012, 09:58 PM

Got a bit more work done the last couple of days.

Port matching: perfect..and everything gets back purged (the proper way to weld tubing) with argon to ensure very smooth joints
on the inside. No back purge= "sugaring" on the inside

Any time two solid exhaust banks are joined together a flex pipe is a MUST, so the passenger side looks like so:

Random shot..

All welded up on the outside:

Passenger side wastegate location:

Driver side wastegate location:

The whole thing comes off by removing 6 header bolts and one V-band clamp

The two wastegates will join on the driver side where the transmission ends. Then the single 2" dump tube will be routed in to the down pipe.

I also finally met (face to face) the soon to be owner of what will be my (well, his) 370z turbo kit. After going through all the details and confusing him with the wastegate operation explanation, I think he is excided to get this project started as I am. April should be a good month.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z Twin Turbo Owners?	GingaBreadMan	Forced Induction	28	01-19-2010 07:21 AM
September 19th Alberta G/Z meet	Sylvan Lake V	Canada	12	09-21-2009 06:07 PM
CF Roof Interest	SpawnAeroJohn	Exterior & Interior	33	08-24-2009 11:20 AM
July 4th Alberta meet	shumby	Canada	2	06-19-2009 11:58 AM
ATTENTION Alberta Buyers	Canadian370Z	Nissan 370Z Pricing / Ordering Discussions	29	03-06-2009 11:45 AM

02-22-2012, 09:58 PM	#11 (permalink)
Boosted Performance The370Z.com Sponsor Join Date: Feb 2010 Location: Edmonton, AB Posts: 1,629 Drives: Z's Rep Power: 3383	Got a bit more work done the last couple of days. Port matching: perfect..and everything gets back purged (the proper way to weld tubing) with argon to ensure very smooth joints on the inside. No back purge= "sugaring" on the inside Any time two solid exhaust banks are joined together a flex pipe is a MUST, so the passenger side looks like so: Random shot.. All welded up on the outside: Passenger side wastegate location: Driver side wastegate location: The whole thing comes off by removing 6 header bolts and one V-band clamp The two wastegates will join on the driver side where the transmission ends. Then the single 2" dump tube will be routed in to the down pipe. I also finally met (face to face) the soon to be owner of what will be my (well, his) 370z turbo kit. After going through all the details and confusing him with the wastegate operation explanation, I think he is excided to get this project started as I am. April should be a good month.