Engine builders 3.7 l in toronto area

Z eliminator · 01-09-2021, 06:53 AM

Does any body know of a good engine shop in the burlington -toronto area
i just got the spark and fuel problem fixed and it looks like the motor skipped
a tooth on the timming chain, car will not start. the timming is way off.
Not sure if the pistons hit the valves
it could be a total rebuild

thanks

Z

Asus_ · 01-10-2021, 08:21 PM

PM'd

Z eliminator · 01-26-2021, 05:12 AM

Update on the car
Got it back from nissan dealer, it now has spark, and fuel , but does not run.
it runs when pulling the cam shaft senser, looks like it has jumped some teeth on the timing chain.
it back fires and not drivable. it will not start wth the cam sensers plugged in
im hoping that the pistons did not hit the valves
The flex wheel was replaced with a new crank sensor .
i have a feeling the moter is junk.
im going to reload new map into the ecu, as they told me that my timming is way off.
if this does not work ,comes the job of taking the front end , rad, and ac coil out and taking the the front cover off the moter.

Z

jchammond · 01-26-2021, 05:33 AM

Ensure your Felexplate isn’t cracked, though you may have checked this already

Rusty · 01-26-2021, 01:36 PM

Is this the motor you been trying to get built for years?

Z eliminator · 04-17-2021, 03:05 PM

Flex plate replaced.
still will not start.
the 4.5 stoker is another story. its suppose to be finished but can not get the shop to ship it.
Looking a replacing the engine.
found a 2020 complete engine but not sure if its comparable with a 2009 Z
not sure if they both have the same wiring harness

Rusty · 04-17-2021, 07:39 PM

Which shop has the 4.5 motor?

01-09-2021, 06:53 AM	#1 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Engine builders 3.7 l in toronto area Does any body know of a good engine shop in the burlington -toronto area i just got the spark and fuel problem fixed and it looks like the motor skipped a tooth on the timming chain, car will not start. the timming is way off. Not sure if the pistons hit the valves it could be a total rebuild thanks Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

01-26-2021, 05:12 AM	#3 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Update on the car Got it back from nissan dealer, it now has spark, and fuel , but does not run. it runs when pulling the cam shaft senser, looks like it has jumped some teeth on the timing chain. it back fires and not drivable. it will not start wth the cam sensers plugged in im hoping that the pistons did not hit the valves The flex wheel was replaced with a new crank sensor . i have a feeling the moter is junk. im going to reload new map into the ecu, as they told me that my timming is way off. if this does not work ,comes the job of taking the front end , rad, and ac coil out and taking the the front cover off the moter. Z __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015. Last edited by Z eliminator; 01-26-2021 at 05:16 AM.

01-26-2021, 05:33 AM	#4 (permalink)
jchammond A True Z Fanatic Join Date: Nov 2014 Location: South Carolina Age: 58 Posts: 15,204 Drives: 13’ 370Z TS 7A/T Rep Power: 2684395	Ensure your Felexplate isn’t cracked, though you may have checked this already __________________ MazWorx built long block \| FI-TT-100 Stage 2.75 \| IPT built 7A/T http://www.the370z.com/members-370z-...s-musings.html

01-26-2021, 01:36 PM	#5 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Is this the motor you been trying to get built for years? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

04-17-2021, 03:05 PM	#6 (permalink)
Z eliminator A True Z Fanatic Join Date: Jul 2009 Location: Ontario Canada Posts: 1,659 Drives: 370 Z 7AT Sports Rep Power: 19	Flex plate replaced. still will not start. the 4.5 stoker is another story. its suppose to be finished but can not get the shop to ship it. Looking a replacing the engine. found a 2020 complete engine but not sure if its comparable with a 2009 Z not sure if they both have the same wiring harness __________________ 12.343 @114.14 . 4.5 stroker motor is now being built. Dec 1 2015.

01-10-2021, 08:21 PM	#2 (permalink)
Asus_ Enthusiast Member Join Date: Sep 2015 Location: neverland. Posts: 348 Drives: 2011 370z T/S Rep Power: 1171	PM'd

04-17-2021, 07:39 PM	#7 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,217 Drives: 2011 Nismo GM 6M Rep Power: 2684438	Which shop has the 4.5 motor? __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
engine builders	HT Rambler	Texas	9	02-05-2016 05:48 PM
Engine builders	NIZZING	Engine & Drivetrain	2	09-09-2014 11:48 AM
FS: 09 370Z 6MT Touring (Toronto area)	zak's z	Cars for sale (Private Classifieds)	0	06-02-2013 10:17 AM
TORONTO area Tint shop	CAN-ZED	Canada	4	02-27-2010 11:26 PM