Coming soon Z1 2 piece 370Z Akebono front rotors, track tested.

SPOHN · 08-23-2013, 02:46 PM

Quote:

Originally Posted by Joepro

I would like to hear some real world feed back never dabbled in LW rotors but I would say dropping that much weight off the hub should improve steering response quite a bit?

It helps in several areas. Mostly small amounts but every little bit counts. The biggest factor in this case of rotors is your removing weight (unsprung) resulting in reduced sprung weight which is in motion. Never found a solid formula but for every pound that's reduce you lose a multiple of sprung weight. EXAMPLE ONLY: Losing 1lb of weight = 10lbs of rotational weight.

All this helps with making the car quicker, curb weight, and suspension load.

fuct · 08-23-2013, 02:48 PM

on my old 1999 prelude waaaay back in the day i went from Volk AV3's to some Volk te-37's.... OMG! the difference in handling was amazing! having felt that difference back then, im all for shaving weight anywhere in that area!

synolimit · 08-23-2013, 08:52 PM

My wheels and tires lost me about 35 pounds or something, like 9.5 each back wheel and 8 for each front. That's huge off the unsprung rotational weight but I can't really say I noticed a huge difference. I would love to do a back to back dyno though if I still had OEM wheels. I'm not sure this is correct but I'd think getting rear rotors would be better than fronts since those are the drive wheels.

kcquinn49 · 08-24-2013, 03:41 PM

Z1: Any chance you will make two piece rotors for the stock setup? I've been looking for lighter weight rotors to replace my stock set. I think Racing Brake makes 2 piece for the front only, for the stock setup.

Rusty · 08-24-2013, 07:03 PM

Quote:

Originally Posted by kcquinn49

Z1: Any chance you will make two piece rotors for the stock setup? I've been looking for lighter weight rotors to replace my stock set. I think Racing Brake makes 2 piece for the front only, for the stock setup.

You talking about the base brakes or the sport brakes? If you got the sport brakes. Racing Brake have the rear rotors.

kcquinn49 · 08-24-2013, 09:24 PM

Base brakes. No plans to be tracking the car. DD for the past 2 years. Just looking for lighter weight, nicer looking rotors.

fuct · 08-26-2013, 12:19 PM

Quote:

Originally Posted by kcquinn49

Base brakes. No plans to be tracking the car. DD for the past 2 years. Just looking for lighter weight, nicer looking rotors.

nicer looking rotors? even if they were gold with diamonds on them the ugly part is the base caliper.

2sl0w · 09-04-2013, 06:50 AM

I have the front and rear 2 piece rotors installed with centric posi quiet pads ( for street use). I am LOVING this setup so far!! I have put about 150 miles on them since install and I am really impressed. The steering does feel lighter up front and more responsive! Braking feel is better but I cannot tell if distances from 60-0 for example are shorter at full pedal but at lower pedal input I do feel like the car is stopping more quickly.

Here are some pics:

And for you non facebook folks:
Front:

Rear

The shipped product will probably look slightly better. This set was used for testing.

Imperial · 09-04-2013, 12:20 PM

They released 2 piece rear rotors? Do they require any cutting/trimming of the dust shield for installation?

synolimit · 09-04-2013, 05:21 PM

Looks good.

SPOHN · 09-04-2013, 05:33 PM

Quote:

Originally Posted by Imperial

They released 2 piece rear rotors? Do they require any cutting/trimming of the dust shield for installation?

There still street testing them.

2sl0w · 09-05-2013, 01:19 AM

Quote:

Originally Posted by Imperial

They released 2 piece rear rotors? Do they require any cutting/trimming of the dust shield for installation?

Nope. Same size as stock rotors so it is a direct bolt on. They are street testing still as spohn mentioned. I am just lucky / a guinea pig... lol.

John@Z1 · 09-05-2013, 09:13 AM

No need in answering when Spohn and 2slow are on it.

DEpointfive0 · 09-05-2013, 10:28 AM

Quote:

Originally Posted by John@Z1

No need in answering when Spohn and 2slow are on it.

I noticed they said you weren't going to come to work this week...

( Click to show/hide )

kcquinn49 · 09-08-2013, 10:08 AM

Quote:

Originally Posted by fuct

nicer looking rotors? even if they were gold with diamonds on them the ugly part is the base caliper.

I agree 100%. I'm looking also for aluminum calipers that fit the base coupe OEM rotors. Not having much luck.

08-23-2013, 08:52 PM	#93 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	My wheels and tires lost me about 35 pounds or something, like 9.5 each back wheel and 8 for each front. That's huge off the unsprung rotational weight but I can't really say I noticed a huge difference. I would love to do a back to back dyno though if I still had OEM wheels. I'm not sure this is correct but I'd think getting rear rotors would be better than fronts since those are the drive wheels. __________________ 13 370z-

09-04-2013, 06:50 AM	#98 (permalink)
2sl0w Base Member Join Date: Feb 2013 Location: Atlanta Posts: 106 Drives: Z34, BCNR33, F83 Rep Power: 12	I have the front and rear 2 piece rotors installed with centric posi quiet pads ( for street use). I am LOVING this setup so far!! I have put about 150 miles on them since install and I am really impressed. The steering does feel lighter up front and more responsive! Braking feel is better but I cannot tell if distances from 60-0 for example are shorter at full pedal but at lower pedal input I do feel like the car is stopping more quickly. Here are some pics: And for you non facebook folks: Front: Rear The shipped product will probably look slightly better. This set was used for testing. John@Z1, Shadezz and synolimit like this. __________________ \|\| Z1 Intake, U/L Plenum, Headers, Oil Cooler, Two Piece Rotors, SP Diff 3.54 FD, Semi Solid Mounts, Clutch + LW Flywheel + CSC Del \|\| Uprev \|\| A.R.T. Pipes + XYZ Mid Pipe w/ HFC \|\| Tomei CBE \|\| Nismo Sways \|\| BC BR 12k/10K \|\| SPC Arms \|\| Dewla Shroud \|\| Advan RSD \|\| Last edited by 2sl0w; 09-04-2013 at 07:00 AM.

09-04-2013, 05:21 PM	#100 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Looks good. 2sl0w likes this. __________________ 13 370z-

09-05-2013, 09:13 AM	#103 (permalink)
John@Z1 The370Z.com Sponsor Join Date: Nov 2008 Location: GA Posts: 1,589 Drives: Turbos Rep Power: 20	No need in answering when Spohn and 2slow are on it. SPOHN, DEpointfive0, Shadezz and 1 others like this. __________________ Z1 Motorsports will beat any advertised price on Nissan OEM Parts! 770-838-7777 ext 311 AIM: JohnatZ1 email: John@Z1motorsports.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Nissan Akebono 14" Brake Kits, Hawk Pads, Stoptech Rotors, 370Z Sport	Coz@Czp	Suspension/Brakes	68	06-01-2018 12:23 PM
My New 3 piece Forgiato Wheels 20x12 rear and 20x9.5 front	nextlevel2k1	Wheels & Tires	8	09-09-2009 07:58 PM
WTB: Front Akebono Calipers	djosephm	Parts for sale (Private Classifieds)	5	07-22-2009 05:36 PM
Measured gains tested from Test Pipe to HFC??	ErnieT	Intake/Exhaust	8	07-18-2009 09:51 PM
Best Motoring 370Z track battle! (Coming Soon)	AK370Z	Nissan 370Z General Discussions	41	02-06-2009 04:18 AM

08-23-2013, 02:48 PM	#92 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	on my old 1999 prelude waaaay back in the day i went from Volk AV3's to some Volk te-37's.... OMG! the difference in handling was amazing! having felt that difference back then, im all for shaving weight anywhere in that area!

08-24-2013, 03:41 PM	#94 (permalink)
kcquinn49 Base Member Join Date: Dec 2011 Location: Indiana Posts: 86 Drives: 2011 370Z Coupe Rep Power: 249	Z1: Any chance you will make two piece rotors for the stock setup? I've been looking for lighter weight rotors to replace my stock set. I think Racing Brake makes 2 piece for the front only, for the stock setup.

08-24-2013, 09:24 PM	#96 (permalink)
kcquinn49 Base Member Join Date: Dec 2011 Location: Indiana Posts: 86 Drives: 2011 370Z Coupe Rep Power: 249	Base brakes. No plans to be tracking the car. DD for the past 2 years. Just looking for lighter weight, nicer looking rotors.

09-04-2013, 12:20 PM	#99 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 15	They released 2 piece rear rotors? Do they require any cutting/trimming of the dust shield for installation?