SuperPro 370z Bushing replacement

ZeN · 04-15-2014, 12:50 AM

Gents,

While searching for OEM alternative bush besides Delrin and SPL i found this website

370z Bushing replacement

Have anyone from down under tried any of it, it is quite popular with the 350z guys, just wanted to know your impression if you had it.

Zen

ZeN · 05-23-2014, 01:54 AM

Update : I had change my front stock upper arm bushing to SuperPro. Noticeable change in handling during cornering/turn in/changing lane - firm. It did eliminate that feel of soft side wall tire feeling - AD08R.

It didn't solve my squeak problem so it didnt came from Upper Arm. They have lower arm bushing but not in stock so i will change that later. Next to change will be SPL end link for both front and rear to eliminate that squeek/knock sound from my front end. Still hunting for that lil mice and crickets - stay tune.

ValidusVentus · 05-24-2014, 12:09 AM

I am looking at buying these, looks like the most complete bushing set for the 370 I have seen. Any comments on the product quality or anything else related?

ZeN · 05-24-2014, 12:26 AM

Non that i can see, i only had it for 300km, so far no issue or squeek coming from it. You can lift the upper arm with 1 fingers now but still it maintain the rigidity on the other axis. Take my dealer 1/2 hr to change per side, easy mod. No extra NVH observed for those that prioritize comfort.

I went for it because they have it in stock in Malaysia and other bushings like Delrin have to be imported.

ValidusVentus · 05-24-2014, 12:46 AM

Thanks for the info
I was thinking they were actually made of delrin but they are made of poly aren't they?

Just to be clear, delrin is a material, not a company (that I'm aware of).

04-15-2014, 12:50 AM	#1 (permalink)
ZeN Base Member Join Date: Apr 2011 Location: Malaysia Posts: 116 Drives: 09 PW 7AT 370z Rep Power: 14	SuperPro 370z Bushing replacement Gents, While searching for OEM alternative bush besides Delrin and SPL i found this website 370z Bushing replacement Have anyone from down under tried any of it, it is quite popular with the 350z guys, just wanted to know your impression if you had it. Zen

05-24-2014, 12:09 AM	#3 (permalink)
ValidusVentus Enthusiast Member Join Date: Jun 2011 Location: Washington State Posts: 400 Drives: #18 Z34 Rep Power: 23	I am looking at buying these, looks like the most complete bushing set for the 370 I have seen. Any comments on the product quality or anything else related? __________________ Mods: Dedicated caged track car, lots of things. \|\|\| Valkyrie Autosport \|\|\|

05-24-2014, 12:46 AM	#5 (permalink)
ValidusVentus Enthusiast Member Join Date: Jun 2011 Location: Washington State Posts: 400 Drives: #18 Z34 Rep Power: 23	Thanks for the info I was thinking they were actually made of delrin but they are made of poly aren't they? Just to be clear, delrin is a material, not a company (that I'm aware of). __________________ Mods: Dedicated caged track car, lots of things. \|\|\| Valkyrie Autosport \|\|\|

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Differential bushing	6mtg37s	Engine & Drivetrain	153	10-17-2015 12:43 PM
Whiteline differential bushing on a G37 project has started.	TVPostSound	Engine & Drivetrain	17	12-08-2014 09:33 PM
Delrin UCA bushing installed (Top Element)	Vrg37s	Brakes & Suspension	4	03-10-2014 11:55 PM
Differential Bushing Failure	jaedub	Nissan 370Z General Discussions	2	02-19-2014 09:04 PM
[FOR SALE] SPL Solid Diff Bushing Set	oro	Parts for sale (Private Classifieds)	3	03-22-2013 02:55 AM

05-23-2014, 01:54 AM	#2 (permalink)
ZeN Base Member Join Date: Apr 2011 Location: Malaysia Posts: 116 Drives: 09 PW 7AT 370z Rep Power: 14	Update : I had change my front stock upper arm bushing to SuperPro. Noticeable change in handling during cornering/turn in/changing lane - firm. It did eliminate that feel of soft side wall tire feeling - AD08R. It didn't solve my squeak problem so it didnt came from Upper Arm. They have lower arm bushing but not in stock so i will change that later. Next to change will be SPL end link for both front and rear to eliminate that squeek/knock sound from my front end. Still hunting for that lil mice and crickets - stay tune.

05-24-2014, 12:26 AM	#4 (permalink)
ZeN Base Member Join Date: Apr 2011 Location: Malaysia Posts: 116 Drives: 09 PW 7AT 370z Rep Power: 14	Non that i can see, i only had it for 300km, so far no issue or squeek coming from it. You can lift the upper arm with 1 fingers now but still it maintain the rigidity on the other axis. Take my dealer 1/2 hr to change per side, easy mod. No extra NVH observed for those that prioritize comfort. I went for it because they have it in stock in Malaysia and other bushings like Delrin have to be imported.