Alignment question

Yutnaka · 04-14-2014, 05:58 PM

I finally had an alignment done and I am looking for some opinion. I know i need rear camber arms, but the fronts look funny.

Front left camber: 1.4
Front right camber: 2.1

Could camber be that much off from side to side? Or should i get a second opinion before i get the front cambers arms installed too.

Mods listed on sig.

Any help would be great!

Rangerz · 04-14-2014, 06:16 PM

Quote:

Originally Posted by Yutnaka

I finally had an alignment done and I am looking for some opinion. I know i need rear camber arms, but the fronts look funny.

Front left camber: 1.4
Front right camber: 2.1

Could camber be that much off from side to side? Or should i get a second opinion before i get the front cambers arms installed too.

Mods listed on sig.

Any help would be great!

Stock upper control arms? If so are you sure nothing is bent or badly worn? Seems pretty far out if it still stock. Have you lowered it?

Yutnaka · 04-14-2014, 06:18 PM

Yes it's on stock arms. Everything looked good last time I checked. Maybe a bad shop reading? Its tein springs.

NORAIN · 04-14-2014, 07:14 PM

When I had stock a-arms mine was off .5 from side to side. I had said the same thing. So seems kinda normal to me.
Now that I have a-arms it's set at -1.4 both sides. I had it at -.67 ( exact spec. ) at first but hated it.

Yutnaka · 04-14-2014, 07:28 PM

Quote:

Originally Posted by NORAIN

When I had stock a-arms mine was off .5 from side to side. I had said the same thing. So seems kinda normal to me.
Now that I have a-arms it's set at -1.4 both sides. I had it at -.67 ( exact spec. ) at first but hated it.

Thanks. I also saw another 370 that was 1 degree off from side to side, but he was also fine with nothing broken.

04-14-2014, 05:58 PM	#1 (permalink)
Yutnaka Base Member Join Date: Apr 2011 Location: Columbus, GA Posts: 212 Drives: 2011 370z 7at GM Rep Power: 14	Alignment question I finally had an alignment done and I am looking for some opinion. I know i need rear camber arms, but the fronts look funny. Front left camber: 1.4 Front right camber: 2.1 Could camber be that much off from side to side? Or should i get a second opinion before i get the front cambers arms installed too. Mods listed on sig. Any help would be great! __________________ Z1 Test Pipes, AAM S-Line Midpipe, Nismo Axleback, Takeda CAI, JDM fog light, Avant Garde M310 matte black, Tein springs, uprev 310whp-SOLD!

04-14-2014, 06:18 PM	#3 (permalink)
Yutnaka Base Member Join Date: Apr 2011 Location: Columbus, GA Posts: 212 Drives: 2011 370z 7at GM Rep Power: 14	Yes it's on stock arms. Everything looked good last time I checked. Maybe a bad shop reading? Its tein springs. __________________ Z1 Test Pipes, AAM S-Line Midpipe, Nismo Axleback, Takeda CAI, JDM fog light, Avant Garde M310 matte black, Tein springs, uprev 310whp-SOLD! Last edited by Yutnaka; 04-14-2014 at 06:21 PM.

04-14-2014, 07:14 PM	#4 (permalink)
NORAIN Enthusiast Member Join Date: Jun 2013 Location: Wilmington, NC Age: 57 Posts: 323 Drives: 2011 370Z 6M SP Rep Power: 12	When I had stock a-arms mine was off .5 from side to side. I had said the same thing. So seems kinda normal to me. Now that I have a-arms it's set at -1.4 both sides. I had it at -.67 ( exact spec. ) at first but hated it. __________________ Swift Springs\|265-305 RE-11\|Forgestar F14\|F.I. TDX S.S. 12" Res."Milled Out"\|K&N\|SPL\|Z1(34 row)oil cooler\|Z1 brake upgrade\|Hotchkis Zspeed\|Team Voodoo\|HPDEjunkie.com

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Alignment question with toe??? Help?	synolimit	Brakes & Suspension	22	02-08-2014 03:31 PM
alignment question	sonic370	Wheels & Tires	9	11-05-2011 08:01 PM
Alignment Question	onzedge	Brakes & Suspension	8	11-04-2011 09:20 PM
Alignment Question	Bryan	Brakes & Suspension	5	09-25-2011 09:25 AM
Alignment question	370Z JT	Brakes & Suspension	4	02-16-2011 05:34 PM