Shorter ball joint for SPC upper control arms
 

Had anyone changed the ball joints that come on the spc arms for shorter ones? They are so much taller than the ones on the stock upper control arm and it hits on hard bumps/dips.

i think this has been an issue for a couple years now. its why everyone was waiting so patiently for SPL to make a set.

Ouch they are not cheap, had anyone had clearance issues with them?

with the SPL ones? no

with the SPC ones? yes

Damn how low are you?

To me not that low, these cars just have weird front suspension

I'm waiting on my coils to come in I don't plan on slamming it though. Maybe an inch but nothing more till I can save for the spl arms.

I think you're lower then letting on. Whats the ground to fender height?

are you guys talking about the thump on the front arms when hitting a dip ?

25.5" in the front

Yeah

Yes, which can damage your spindles and lead to catastrophic failure.

So you are 2.49 in lower than stock which is fuggin low! That's why, if your on coils, Just stiffen up the compression or raise the car up and get bigger wheels. To be that low the risk vs gain is very high for these nice cars. I would rather be safe and not "oh hella flush" than break stuff and loose the car and possibly myself or my wife. You can still look good and be safe and not jack up stuff. But it's you're car, just don't make a thread saying "crashed my z because pos spc arms were faulty".

For everyone that was wondering, my buddy made me some custom arms for max clearance, these will never hit.
http://img.tapatalk.com/d/14/04/04/amu3asu8.jpg

Can you get him to give you the manufacturer, model and size information for the spherical/balljoint he used?

Yeah no problem