Shorter ball joint for SPC upper control arms

synolimit · 04-04-2014, 02:06 PM

Quote:

Originally Posted by Lowbz21

For everyone that was wondering, my buddy made me some custom arms for max clearance, these will never hit.

Nice. Simple, ams/kinetixs copy, so I'm sure it works. But no caster. Hope your left and right are close to equal.

Lowbz21 · 04-04-2014, 02:10 PM

Quote:

Originally Posted by synolimit

Nice. Simple, ams/kinetixs copy, so I'm sure it works. But no caster. Hope your left and right are close to equal.

Yeah they are exactly the same. I kept my spcs in the neutral caster position anyway so I didn't need anything special. These also have more than enough positive and negative adjustment which is cool. I read the kinetix arms were limited.

Sh0velMan · 04-04-2014, 02:15 PM

Quote:

Originally Posted by Lowbz21

Yeah they are exactly the same. I kept my spcs in the neutral caster position anyway so I didn't need anything special. These also have more than enough positive and negative adjustment which is cool. I read the kinetix arms were limited.

Mine are all the way in and the best i can manage is around -2.6 degrees, if I'm pretty low.

Which I am not, normally..

Sh0velMan · 04-04-2014, 02:16 PM

Quote:

Originally Posted by Lowbz21

Yeah they are exactly the same. I kept my spcs in the neutral caster position anyway so I didn't need anything special. These also have more than enough positive and negative adjustment which is cool. I read the kinetix arms were limited.

What did he charge you for them?

I have been tossing around the idea of having some just like yours made but with adjustable ends on the body-side too so that I can use sphericals there and use spacers for caster adjustment.

synolimit · 04-04-2014, 02:28 PM

Quote:

Originally Posted by Lowbz21

Yeah they are exactly the same. I kept my spcs in the neutral caster position anyway so I didn't need anything special. These also have more than enough positive and negative adjustment which is cool. I read the kinetix arms were limited.

That's cool. Most just cut the nut down or threaded part so the tie rod end goes in more for more adjustment. I need caster since I'm 0.3* off.

Joepro · 04-20-2014, 11:19 PM

I just installed a set of spcs(couldn't pass up the price) Im on swifts and koni, the left arms hits quite a bit, only had the right do it once...I did not want to shell out for spl, but looks like its gonna happen...sigh.

Wonka2581 · 04-20-2014, 11:26 PM

Quote:

Originally Posted by Joepro

I just installed a set of spcs(couldn't pass up the price) Im on swifts and koni, the left arms hits quite a bit, only had the right do it once...I did not want to shell out for spl, but looks like its gonna happen...sigh.

How do you like the Koni and swifts? I was thinking of going to that myself... Or should I just save for coils...

Joepro · 04-20-2014, 11:33 PM

Its a really good street setup, IMO. I have also learned you can easily turn them into coilovers as well, koni sells a sleeve for the front and another company sells a kit you bolt into the bucket. Then you can run whatever springs you like! I will be doing this in the future for sure, the swift spec r are great springs, but I like linear springs better.

TonySlimfast · 04-25-2014, 01:09 PM

Quote:

Originally Posted by Sh0velMan

Yes, which can damage your spindles and lead to catastrophic failure.

please elaborate my good man, I either need to stiffen up my springs or change out these arms. Is anyone here on kinetic arms? I also have spc which thumps like crazy at my ride height

takjak2 · 04-25-2014, 02:39 PM

Shameless plug

Custom Front Camber Arms $400

04-20-2014, 11:19 PM	#21 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	I just installed a set of spcs(couldn't pass up the price) Im on swifts and koni, the left arms hits quite a bit, only had the right do it once...I did not want to shell out for spl, but looks like its gonna happen...sigh. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-20-2014, 11:33 PM	#23 (permalink)
Joepro A True Z Fanatic Join Date: Aug 2012 Location: Athens ohio Posts: 1,213 Drives: Company car Rep Power: 34	Its a really good street setup, IMO. I have also learned you can easily turn them into coilovers as well, koni sells a sleeve for the front and another company sells a kit you bolt into the bucket. Then you can run whatever springs you like! I will be doing this in the future for sure, the swift spec r are great springs, but I like linear springs better. Wonka2581 likes this. __________________ Swift\|Koni\|SPC\| FI CBE\|Z1\|Stillen\|Sbend\|Zspeed\|R/T Tuned\|523 whp\|458 tq\|10.5 psi\|SOLD Joepro's Journal\|Joepro's Boosted Performance Build \|Pittsburgh-Western-Pa-Ohio-Wv-Group

04-25-2014, 02:39 PM	#25 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	Shameless plug Custom Front Camber Arms $400 __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Advice for those with SPL Upper Control Arms	SPOHN	Brakes & Suspension	4	05-06-2014 10:45 PM
SPL Upper Control Arms. The First	SPOHN	Brakes & Suspension	97	10-30-2013 04:00 PM
Kinetix front upper control arms	DR_	Track / Autocross / Drifting / Dragstrip	28	10-02-2013 06:51 AM
[FOR SALE] oem catback exhaust, upper control arms	roy'sz	Parts for sale (Private Classifieds)	16	01-31-2013 12:03 PM
[FOR SALE] Front upper Control Arms	pokeyl	Parts for sale (Private Classifieds)	1	10-16-2011 10:25 AM