SPL rear titanium mid links, springs???

gomer_110 · 01-20-2016, 08:38 PM

Quote:

Originally Posted by PEPI

Actually I'm just wondering the actual difference with handling etc between mid-link and standard set up?

Anyone throw me a bone?

Cheers

Suspension geometry doesn't change from stock. The advantages are that you can use more readily available 2.5" ID springs, adjust ride height (could help handling), and can adjust camber and toe with a more robust adjustment than just toe bolts.

I run them on my autox car only because the rules for my class don't allow for running a true coilover in the rear.

PEPI · 01-20-2016, 09:06 PM

Quote:

Originally Posted by gomer_110

Suspension geometry doesn't change from stock. The advantages are that you can use more readily available 2.5" ID springs, adjust ride height (could help handling), and can adjust camber and toe with a more robust adjustment than just toe bolts.

I run them on my autox car only because the rules for my class don't allow for running a true coilover in the rear.

Cheers for that,

DEpointfive0 · 02-09-2016, 01:59 AM

Bump for a problem.

I just installed mine. When I go into any driveway I 3 wheel essentially, and you can hear the spring "pop" like it's going to pop out.

This normal?

DEpointfive0 · 02-09-2016, 02:00 AM

Oh, and how much of a bitch is it for you guys to move the perch up and down with load? (Hell, even without the load of the car, just the "preload")

DEpointfive0 · 02-09-2016, 02:01 AM

7" spring. 8k

DEpointfive0 · 02-09-2016, 10:53 AM

Bump

TerribleONE · 02-09-2016, 11:05 AM

Quote:

Originally Posted by DEpointfive0

Bump

No one likes you anymore...

JARblue · 02-09-2016, 11:08 AM

Quote:

Originally Posted by TerribleONE

No one likes you anymore...

Quote:

Originally Posted by DEpointfive0

Bump for a problem.

I just installed mine. When I go into any driveway I 3 wheel essentially, and you can hear the spring "pop" like it's going to pop out.

This normal?

I'm going out on a limb here. No. Wish I could be of more help

gomer_110 · 02-09-2016, 11:29 AM

When I installed mine I had the pop the first time I tried pulling out of my driveway. Scared the sh!t out of me. After that it never happened again. All I could ever figure was one of the springs wasn't seated properly on the top mounting surface. Maybe try rotating the springs 90°. Also, does disconnecting the rear sway bar help at all?

As far as adjustment goes there's no way in hell I can move the perch without removing the spring but then again I'm also running 900 lb/in springs on mine. I would think with a softer spring and the rear of the car off the ground you should be able to adjust them though.

DEpointfive0 · 02-09-2016, 05:42 PM

Quote:

Originally Posted by gomer_110

When I installed mine I had the pop the first time I tried pulling out of my driveway. Scared the sh!t out of me. After that it never happened again. All I could ever figure was one of the springs wasn't seated properly on the top mounting surface. Maybe try rotating the springs 90°. Also, does disconnecting the rear sway bar help at all?

As far as adjustment goes there's no way in hell I can move the perch without removing the spring but then again I'm also running 900 lb/in springs on mine. I would think with a softer spring and the rear of the car off the ground you should be able to adjust them though.

I'll try rotating them, but it shouldn't make a difference, they're flat on both sides.
I have no rear sway bar.

And that's what I said, BULLSHÍT a human can move the perch... I called SPL they guy said you should be able to, it won't be easy, but it's doable... I couldn't move it worth a damn, lol

Could you potentially post a pic of your setup? One side with like your cell phone under the car is fine. Just trying to see if my setup looks way the hell off...

Thanks in advance

JARblue · 02-09-2016, 05:45 PM

Quote:

Originally Posted by DEpointfive0

I couldn't move it worth a damn, lol

Well, you're pretty scrawny, IINM.

DEpointfive0 · 02-09-2016, 06:06 PM

^no, I don't, lol

Zauskycop · 02-09-2016, 07:12 PM

Helper spring FTW...

Tracy Ramsey

Hotrodz · 02-09-2016, 07:54 PM

Quote:

Originally Posted by JARblue

Well, you're pretty scrawny, IINM.

At his size you don't have to pump iron...just sayin!

Sent from my SM-N910P using Tapatalk

gomer_110 · 02-09-2016, 08:58 PM

Here you go. The reason I suggested rotating the springs was as you can see in my pics, the spring is not compressed perfectly up and down. The thought was maybe the way the spring was compressing two of the coils were coming together.

Another thought, is there any chance your shocks are binding somewhere through their stroke? I know my shocks have a spherical upper mount to help them articulate better. Maybe yours are just sticking and the pop is when they release.

By the way you owe me one now. Laying on a cold concrete floor in ~20° weather sucks.

02-09-2016, 01:59 AM	#33 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Bump for a problem. I just installed mine. When I go into any driveway I 3 wheel essentially, and you can hear the spring "pop" like it's going to pop out. This normal? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-09-2016, 02:00 AM	#34 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Oh, and how much of a bitch is it for you guys to move the perch up and down with load? (Hell, even without the load of the car, just the "preload") __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-09-2016, 02:01 AM	#35 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	7" spring. 8k __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-09-2016, 10:53 AM	#36 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Bump __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-09-2016, 11:29 AM	#39 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	When I installed mine I had the pop the first time I tried pulling out of my driveway. Scared the sh!t out of me. After that it never happened again. All I could ever figure was one of the springs wasn't seated properly on the top mounting surface. Maybe try rotating the springs 90°. Also, does disconnecting the rear sway bar help at all? As far as adjustment goes there's no way in hell I can move the perch without removing the spring but then again I'm also running 900 lb/in springs on mine. I would think with a softer spring and the rear of the car off the ground you should be able to adjust them though. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

02-09-2016, 06:06 PM	#42 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	^no, I don't, lol JARblue likes this. __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

02-09-2016, 07:12 PM	#43 (permalink)
Zauskycop Base Member Join Date: May 2011 Location: Hinckley IL Posts: 228 Drives: 2012 370Z, '16 Miata Rep Power: 14	Helper spring FTW... Tracy Ramsey 2SIC4U likes this.

02-09-2016, 08:58 PM	#45 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36941	Here you go. The reason I suggested rotating the springs was as you can see in my pics, the spring is not compressed perfectly up and down. The thought was maybe the way the spring was compressing two of the coils were coming together. Another thought, is there any chance your shocks are binding somewhere through their stroke? I know my shocks have a spherical upper mount to help them articulate better. Maybe yours are just sticking and the pop is when they release. By the way you owe me one now. Laying on a cold concrete floor in ~20° weather sucks. JARblue likes this. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] NIB Whiteline Rear End Links - NJ	PharmDZ	Parts for sale (Private Classifieds)	3	10-19-2013 10:13 AM
SPL TITANIUM Rear Toe Links IN STOCK READY TO SHIP! No wait!	SE	Suspension/Brakes	3	08-09-2013 02:18 PM
Rear camber links?	tommyguns	Brakes & Suspension	20	06-21-2013 10:05 PM
Rear clunking sound after sway bars and rear links	pty370z	Brakes & Suspension	3	05-19-2013 01:24 PM
[FOR SALE] SPL Rear Camber Links, SPL Rear Traction Links--Brand New in Box!	daleks	Parts for sale (Private Classifieds)	6	09-05-2011 06:22 PM