Brake Pressure Issue 2009 Z

fjpthree · 01-15-2014, 08:03 PM

this past weekend I decided to take a look at my brake pads. Got the wheel off and realized I could not visually see the pad, so I removed the "boot" that houses the pad. Once I got it apart, lost some brake fluid and realized this was not the best way to do this so I put it all back together and decided to leave it up to the professionals. Now the issue is that when I push on the brake pedal the pedal goes all the way to the floor. When I pump the brakes, I do get the pressure back, but only temporarily. The brakes are working, but something is not right. How can I get the brakes working normally? (I did check the brake fluid and it is full.)

Rusty · 01-15-2014, 08:55 PM

Quote:

Originally Posted by fjpthree

this past weekend I decided to take a look at my brake pads. Got the wheel off and realized I could not visually see the pad, so I removed the "boot" that houses the pad. Once I got it apart, lost some brake fluid and realized this was not the best way to do this so I put it all back together and decided to leave it up to the professionals. Now the issue is that when I push on the brake pedal the pedal goes all the way to the floor. When I pump the brakes, I do get the pressure back, but only temporarily. The brakes are working, but something is not right. How can I get the brakes working normally? (I did check the brake fluid and it is full.)

Don't know what you mean be that. But it sounds like you got air in the system. And it needs bled.

fjpthree · 01-15-2014, 09:19 PM

wrong terminology. the hard outer casing with the words "Nissan" on it.

Nissanboy · 01-15-2014, 10:25 PM

you took apart the caliper!?!?!?

fjpthree · 01-16-2014, 07:38 PM

yep..I took apart the caliper and $250 later I am back up and running. Stopped by the Nissan Stealership today. My intention was to replace the brake pads. Does anyone have a DIY for this?

Chuck33079 · 01-16-2014, 07:50 PM

Quote:

Originally Posted by fjpthree

yep..I took apart the caliper and $250 later I am back up and running. Stopped by the Nissan Stealership today. My intention was to replace the brake pads. Does anyone have a DIY for this?

REQUEST:Changing front and rear brake pads on stock akebono

Trips · 01-16-2014, 07:54 PM

Quote:

Originally Posted by Chuck33079

REQUEST:Changing front and rear brake pads on stock akebono

You're the BOMB!!

NOW you know IF something goes wrong your going to get the blame right??

Chuck33079 · 01-16-2014, 07:57 PM

Quote:

Originally Posted by Trips

NOW you know IF something goes wrong your going to get the blame right??

I merely posted the DIY, I didn't write it.

DEpointfive0 · 01-16-2014, 08:08 PM

Wtf, so confused...

So... OP, you couldn't see the pad? From what angle? Why does that lead to TAKING APART the caliper? Have you ever done that before? Do you own a torque wrench?

Sorry for being an áss, I'm just trying to understand what is going on and what led to what

DEpointfive0 · 01-16-2014, 08:10 PM

Oh, and what parts did you buy that came out to $250?

NissanFan · 01-16-2014, 09:51 PM

Quote:

Originally Posted by DEpointfive0

Oh, and what parts did you buy that came out to $250?

genuine nissan trollage

dot3/4 is like $4 at amazon...

Mike · 01-16-2014, 09:53 PM

I'm guessing if he started to separate the halves of the calipers, they had to remove them, inspect and re-tighten, then bleed the system. On an 09, a complete flush was also in order. 250 was not a bad price.

osbornsm · 01-17-2014, 09:14 AM

Quote:

Originally Posted by Mike

I'm guessing if he started to separate the halves of the calipers, they had to remove them, inspect and re-tighten, then bleed the system. On an 09, a complete flush was also in order. 250 was not a bad price.

That's spectacular!!!

You REALLY took apart the whole caliper?!?!?!?!?

Never heard of THAT one before! I'll have to share this with the car-guys.

Thank you for making my morning... and please for God's sake, don't do any work on your car. Leave that to the wrenchin' folks.

NissanFan · 01-17-2014, 02:13 PM

Quote:

Originally Posted by osbornsm

That's spectacular!!!

You REALLY took apart the whole caliper?!?!?!?!?

Never heard of THAT one before! I'll have to share this with the car-guys.

Thank you for making my morning... and please for God's sake, don't do any work on your car. Leave that to the wrenchin' folks.

uhhhhhhhhh... weren't you the guy that took something apart and later had a few screws left after you were done putting it all back together?

oh wait, that was me.

1slow370 · 01-22-2014, 03:39 AM

hahahahaha

01-15-2014, 08:03 PM	#1 (permalink)
fjpthree Base Member Join Date: May 2011 Location: Maryland Posts: 67 Drives: 09 Touring/Sport/Nav Rep Power: 14	Brake Pressure Issue 2009 Z this past weekend I decided to take a look at my brake pads. Got the wheel off and realized I could not visually see the pad, so I removed the "boot" that houses the pad. Once I got it apart, lost some brake fluid and realized this was not the best way to do this so I put it all back together and decided to leave it up to the professionals. Now the issue is that when I push on the brake pedal the pedal goes all the way to the floor. When I pump the brakes, I do get the pressure back, but only temporarily. The brakes are working, but something is not right. How can I get the brakes working normally? (I did check the brake fluid and it is full.)

01-16-2014, 08:08 PM	#9 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Wtf, so confused... So... OP, you couldn't see the pad? From what angle? Why does that lead to TAKING APART the caliper? Have you ever done that before? Do you own a torque wrench? Sorry for being an áss, I'm just trying to understand what is going on and what led to what __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

01-16-2014, 08:10 PM	#10 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17151	Oh, and what parts did you buy that came out to $250? __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

01-16-2014, 09:53 PM	#12 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I'm guessing if he started to separate the halves of the calipers, they had to remove them, inspect and re-tighten, then bleed the system. On an 09, a complete flush was also in order. 250 was not a bad price. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

01-22-2014, 03:39 AM	#15 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	hahahahaha __________________ ANSWER PRICE LIST Answers - - - - - - - - - - - - - - - - $0.75 Answers (requiring thought) - - - - $1.25 Answers (correct) - - - - - - - - - - $12.50

01-15-2014, 09:19 PM	#3 (permalink)
fjpthree Base Member Join Date: May 2011 Location: Maryland Posts: 67 Drives: 09 Touring/Sport/Nav Rep Power: 14	wrong terminology. the hard outer casing with the words "Nissan" on it.

01-15-2014, 10:25 PM	#4 (permalink)
Nissanboy Enthusiast Member Join Date: Dec 2010 Location: H-Town Posts: 378 Drives: Too slow Rep Power: 15	you took apart the caliper!?!?!?

01-16-2014, 07:38 PM	#5 (permalink)
fjpthree Base Member Join Date: May 2011 Location: Maryland Posts: 67 Drives: 09 Touring/Sport/Nav Rep Power: 14	yep..I took apart the caliper and $250 later I am back up and running. Stopped by the Nissan Stealership today. My intention was to replace the brake pads. Does anyone have a DIY for this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Key Fob Issue/Tire Pressure Light	Bidness91	Exterior & Interior	16	07-10-2017 01:30 PM
Brake pressure drop while down shift	sawill629	Brakes & Suspension	9	06-15-2013 11:10 PM
Brake issue maybe	silentnightz	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	2	03-04-2013 06:24 PM
Brake issue.	blackflag	Brakes & Suspension	4	02-19-2010 09:49 AM
advice needed on brake issue	boosted180	Track / Autocross / Drifting / Dragstrip	5	08-18-2009 08:01 PM