Alignment Specs? Need Help
 

I installed my swifts a week or two ago and decided to go get my alignment checked today

http://www.the370z.com/members/recto...5-img-0086.jpg

All they did was check to see what its at right now, they didn't adjust anything.

I'm trying to figure out what I need to get back into factory spec.
Is it normal for only one wheel to be so far off?

http://www.z1motorsports.com/g37_370...=4203{238}1725

http://www.z1motorsports.com/g37_370...oducts_id=3980

http://www.z1motorsports.com/g37_370...oducts_id=3981

Will the Camber Bolts be enough to get the back left back in spec or will I need the whole arm. Is it a bad idea to only get the back left side since the back right isn't to bad?

I'm been reading so much about it that I've really confused my self now :confused::confused:

Any help would be great

http://www.the370z.com/brakes-suspen...ent-specs.html

:tup:

Thats actually the chart I'm using haha.
I guess what I'm asking is what do I need to get back to spec, will the cam bolts be enough or do I need the arms too?

Spl arms only. Do it right or not at all :)

But you also need traction arms.