EIbachs came in!!!

simota1 · 08-27-2009, 10:32 AM

hey everyone... my eibachs finally came in... ill borrow my friends camera and try to do a DIY for installation of eibachs...

but as of right now...

im so happy imma kill that fender gap...

Caravanshaka · 08-27-2009, 01:25 PM

good luck with the front spring compression on a DIY! have another vehicle available to bring the spring/strut combo to a shop to get them swapped out just in case!

In for pics

bullitt5897 · 08-27-2009, 02:11 PM

GL in for pics! I have done this type of swap a half dozen times not really that hard. Just make sure you have a spring compressor to remove and replace them springs

Mike

simota1 · 08-27-2009, 08:02 PM

ive done this quite a few times but mostly hondas lol....

umm i think itll be the same thing though take out strut compress stock take out... compress eibach and lay it in correctly

Snakes709 · 08-28-2009, 12:59 AM

when will u have pictures up...i wanna see if its really worth getting the springs.

RCZ · 08-28-2009, 12:59 AM

Its the same thing...you can always just do it the old fashioned way and have your buddy push them down while you get the hat on

Reward him with a beer. All is good.

Shunya · 08-28-2009, 01:36 AM

congratulations, I've never been a lowering spring kinda person. always went with coils

Caravanshaka · 08-28-2009, 08:52 AM

Quote:

Originally Posted by simota1

ive done this quite a few times but mostly hondas lol....

umm i think itll be the same thing though take out strut compress stock take out... compress eibach and lay it in correctly

ya, just be careful with those fronts since a few on the forum haven't been able to compress them enough with a general spring compressor to get them off. Mike (the powdercoater) had to take his to goodyear to get the springs swapped for $40.

simota1 · 08-28-2009, 11:59 AM

hey everyone... i decided to not do a diy its to fuckin hard for a person with no mechanical skills to do this... i got to compress on driver side and installed it... it wasnt that hard to compress the springs takes a lil thinking though... i got bad news...

the bottom nut holding the strut in place was rounded of by me when i decided to use the impact gun... sigh... thats not where it ends... i freakin just got rear ended like 30 mins ago the dood ran away!!! pissed me off!!! so i chased him and got his plate number ... dumass was proly drunk thas why he ran... haha funny part was... an toyota echo... cannot out run a z

on a straight away... wat an IDIOT... at least start turning into the alleys or something... ugh...

Shunya · 08-28-2009, 12:03 PM

Quote:

Originally Posted by simota1

hey everyone... i decided to not do a diy its to fuckin hard for a person with no mechanical skills to do this... i got to compress on driver side and installed it... it wasnt that hard to compress the springs takes a lil thinking though... i got bad news...

the bottom nut holding the strut in place was rounded of by me when i decided to use the impact gun... sigh... thats not where it ends... i freakin just got rear ended like 30 mins ago the dood ran away!!! pissed me off!!! so i chased him and got his plate number ... dumass was proly drunk thas why he ran... haha funny part was... an toyota echo... cannot out run a z

on a straight away... wat an IDIOT... at least start turning into the alleys or something... ugh...

sorry to hear

cheer up

Caravanshaka · 08-28-2009, 01:26 PM

damn dude, REALLY glad you got a plate number though, and that no one got hurt! Hope to see pics of the car dropped (with a new rear bumper) soon!

simota1 · 08-28-2009, 05:46 PM

ya man...

guy makes me irritated...

simota1 · 08-29-2009, 06:14 AM

alright up date on springs... after the round off the nut i took it to a shop and they got it done... it looks... just a tad bit lower... i would give it a 8outa 10 my only complaint is the front is higher than the rear?!?

hopefully it settles and it looks level... btw... my mud flaps came in and the guy dedided to put them on for me for me sooo i guess i cant do a DIY on the drop or the flaps cuz i have no pictures wat so ever... also my nismo black shift knob

feels nice... had to break the stock one though... haha no way saving that one..

Caravanshaka · 08-29-2009, 01:31 PM

!

simota1 · 08-30-2009, 05:31 AM

gotta get a camera first... ill post them when up...

08-27-2009, 10:32 AM	#1 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	EIbachs came in!!! hey everyone... my eibachs finally came in... ill borrow my friends camera and try to do a DIY for installation of eibachs... but as of right now... im so happy imma kill that fender gap... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

08-27-2009, 01:25 PM	#2 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	good luck with the front spring compression on a DIY! have another vehicle available to bring the spring/strut combo to a shop to get them swapped out just in case! In for pics __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

08-27-2009, 02:11 PM	#3 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	GL in for pics! I have done this type of swap a half dozen times not really that hard. Just make sure you have a spring compressor to remove and replace them springs Mike __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

08-27-2009, 08:02 PM	#4 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	ive done this quite a few times but mostly hondas lol.... umm i think itll be the same thing though take out strut compress stock take out... compress eibach and lay it in correctly __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

08-28-2009, 11:59 AM	#9 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	hey everyone... i decided to not do a diy its to fuckin hard for a person with no mechanical skills to do this... i got to compress on driver side and installed it... it wasnt that hard to compress the springs takes a lil thinking though... i got bad news... the bottom nut holding the strut in place was rounded of by me when i decided to use the impact gun... sigh... thats not where it ends... i freakin just got rear ended like 30 mins ago the dood ran away!!! pissed me off!!! so i chased him and got his plate number ... dumass was proly drunk thas why he ran... haha funny part was... an toyota echo... cannot out run a z on a straight away... wat an IDIOT... at least start turning into the alleys or something... ugh... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

08-28-2009, 12:59 AM	#5 (permalink)
Snakes709 A True Z Fanatic Join Date: Aug 2009 Location: Edmonton Posts: 1,205 Drives: 2011 Evo-X GSR Rep Power: 18	when will u have pictures up...i wanna see if its really worth getting the springs.

08-28-2009, 12:59 AM	#6 (permalink)
RCZ A True Z Fanatic Join Date: Nov 2008 Location: Miami Posts: 6,403 Drives: '09 370Z Rep Power: 1119	Its the same thing...you can always just do it the old fashioned way and have your buddy push them down while you get the hat on Reward him with a beer. All is good.

08-28-2009, 01:36 AM	#7 (permalink)
Shunya A True Z Fanatic Join Date: May 2009 Location: Vancouver Posts: 3,069 Drives: You Crazy! Rep Power: 22	congratulations, I've never been a lowering spring kinda person. always went with coils

08-28-2009, 01:26 PM	#11 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	damn dude, REALLY glad you got a plate number though, and that no one got hurt! Hope to see pics of the car dropped (with a new rear bumper) soon! __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

08-28-2009, 05:46 PM	#12 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	ya man... guy makes me irritated... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

08-29-2009, 06:14 AM	#13 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	alright up date on springs... after the round off the nut i took it to a shop and they got it done... it looks... just a tad bit lower... i would give it a 8outa 10 my only complaint is the front is higher than the rear?!? hopefully it settles and it looks level... btw... my mud flaps came in and the guy dedided to put them on for me for me sooo i guess i cant do a DIY on the drop or the flaps cuz i have no pictures wat so ever... also my nismo black shift knob feels nice... had to break the stock one though... haha no way saving that one.. __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

08-29-2009, 01:31 PM	#14 (permalink)
Caravanshaka I shake Caravans Join Date: Apr 2009 Location: north Dallas Posts: 9,517 Drives: everyone crazy Rep Power: 42	! __________________ ____________________ PROJECT DiaD - Sold but not forgotten! The first testicular guard, the "Cup," was used in Hockey in 1874 and the first helmet was used in 1974. That means it only took 100 years for men to realize that in order to work the penis, the brain must remain whole.

08-30-2009, 05:31 AM	#15 (permalink)
simota1 A True Z Fanatic Join Date: May 2009 Location: Dededo, Guam Posts: 6,642 Drives: solid red 370z 6mt Rep Power: 405	gotta get a camera first... ill post them when up... __________________ *TOP SECRET/POWERHOUSE AMUSE/ARC/DAYTONA RACING/VARIS/MINES/GANADOR/J-LINE/WORK EMOTION CR KAI/GT SPEC/CARBON SIGNAL/ZOOM ENGINEERING/ CARBON FIBER ELEMENT/STILLEN/*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
alignment results after eibachs	Mike	Brakes & Suspension	2	06-24-2009 12:51 PM