SS brake lines benefits?

Dustin@Z1 · 10-18-2009, 07:48 PM

We have a set in production now and will be releasing them soon. We already have a prototype set we have been testing on our shop 370Z. Look for these to be released shorltly!

dcrew1x · 10-26-2009, 09:38 PM

Sweet. Looking forward to updates!

Dustin@Z1 · 10-28-2009, 05:35 PM

Just letting you guys know, I have just added our SS Brake line kits to the website under the classified section.

You can read more about them here:
Z1 SS Brake Lines NOW AVAILABLE @ Z1 Motorsports

KillerBee370 · 11-17-2009, 04:32 PM

Back in July I had the G-Spec SS brake lines put in along with Motul 660 brake fluid and I definitely recommend the setup.

AP - Chris_B · 11-19-2009, 08:51 PM

Quote:

Originally Posted by bigaudiofanat

I agree 100% when I changed my brake lines on my bike to ss I felt a huge difference. Much less fade when you put on the brakes.

I highly recommend this upgrade. I've done it on every car I've owned (that I could find quality SS lines for). Short of a BBK, there is nothing that gives a bigger difference in feel and control that stainless steel braided lines and fresh, high-quality brake fluid. Even for my DD's, I could never go back to the squishy, vague rubber lines -- ever!

Just be sure you by from a recognized manufacturer that has tested them for TÜV certification, DOT compliance and FMVSS 106 standards. Make them prove this. There are a lot of cheap line kits being imported that are below par at best. Other have purchased do-it-yourself equipment that could be OK, but without testing the results from that specific piece of equipment and that specific process (not a generalized test done by the machine's manufacturer), you don't really know what you are getting.

For the above reasons, I'd recommend the Stillen/Goodridge lines. These have all the bases covered, along with a lifetime guarantee.

Chris

kannibul · 11-19-2009, 11:06 PM

Quote:

Originally Posted by bmarcinczyk14

what benefits will you see with stainless steal brake lines in autox and road racing? are the stock ones not stainless steal? if not what material are they?

The brake lines themselves are steel from the master cylinder and around to the areas near the wheels, but the lines going from there to your calipers are rubber, like they are in most vehicles.

Getting stainless-steel ones won't expand under pressure, as the weave around the hoses expand very little.

The result/benfit is a "snappier" brake, as there is less pressure loss in the rubber part due to expansion. It also looks better IMO.

kannibul · 11-19-2009, 11:07 PM

Quote:

Originally Posted by AP - Chris_B

I highly recommend this upgrade. I've done it on every car I've owned (that I could find quality SS lines for). Short of a BBK, there is nothing that gives a bigger difference in feel and control that stainless steel braided lines and fresh, high-quality brake fluid. Even for my DD's, I could never go back to the squishy, vague rubber lines -- ever!

Just be sure you by from a recognized manufacturer that has tested them for TÜV certification, DOT compliance and FMVSS 106 standards. Make them prove this. There are a lot of cheap line kits being imported that are below par at best. Other have purchased do-it-yourself equipment that could be OK, but without testing the results from that specific piece of equipment and that specific process (not a generalized test done by the machine's manufacturer), you don't really know what you are getting.

For the above reasons, I'd recommend the Stillen/Goodridge lines. These have all the bases covered, along with a lifetime guarantee.

Chris

I want to add...your brake lines are not something you want to cheap out on. Failure in that area could result in some very bad happening!

AP - Chris_B · 11-20-2009, 11:23 AM

Quote:

Originally Posted by kannibul

I want to add...your brake lines are not something you want to cheap out on. Failure in that area could result in some very bad happening!

+1 to that! I had a rear line failure two years ago on the freeway. It looked like I ran over something that kick up and sliced a rubber line. I had just upgraded the front lines, but the rears in the kit weren't correct. While I was waiting for the replacements, the left rear got cut. Cost me one BMW E34 540i M-Technic 6-speed in pristine condition, but we were lucky no one was hurt. It happened right in front of a highway patrol car. Fortunately, he was a vehicle inspector who signed off on my equipment damage explanation. I was about 4 feet from taking out his car too...

KillerBee370 · 11-21-2009, 10:13 AM

The benefits were perfectly clear at the track yesterday.

10-26-2009, 09:38 PM	#17 (permalink)
dcrew1x Track Member Join Date: Jun 2009 Location: SoCal Posts: 821 Drives: Graphite Bullet Rep Power: 369	Sweet. Looking forward to updates! __________________ 2009 PG 6MT Sports Stillen Gen3 CAI \| Stillen CBE \| AMS Short Shifter \| Nismo Brace Kit

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Stoptech Rotors, Hawk Pads, CZP Brake Lines, >>	Coz@Czp	Suspension/Brakes	71	02-09-2018 11:12 AM
Do you want Goodridge braided steel brake lines for the 370Z?	semtex	Brakes & Suspension	34	01-13-2010 11:25 AM
Has anyone gotten any Sport package SS brake lines?	MightyBobo	Brakes & Suspension	2	07-14-2009 11:48 PM

10-18-2009, 07:48 PM	#16 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	We have a set in production now and will be releasing them soon. We already have a prototype set we have been testing on our shop 370Z. Look for these to be released shorltly!

10-28-2009, 05:35 PM	#18 (permalink)
Dustin@Z1 The370Z.com Sponsor Join Date: Jun 2009 Location: NLA Posts: 1,313 Drives: NLA Rep Power: 18	Just letting you guys know, I have just added our SS Brake line kits to the website under the classified section. You can read more about them here: Z1 SS Brake Lines NOW AVAILABLE @ Z1 Motorsports

11-17-2009, 04:32 PM	#19 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 52 Posts: 5,964 Drives: with passion Rep Power: 322	Back in July I had the G-Spec SS brake lines put in along with Motul 660 brake fluid and I definitely recommend the setup.

11-21-2009, 10:13 AM	#24 (permalink)
KillerBee370 A True Z Fanatic Join Date: Mar 2009 Location: So Cal baby! Age: 52 Posts: 5,964 Drives: with passion Rep Power: 322	The benefits were perfectly clear at the track yesterday.