Front camber arm selection?

Mike · 11-07-2013, 06:06 PM

The voodoo are adjusted at the outer ends of the control arms, bolts that face outwards

Rusty · 11-07-2013, 06:19 PM

Quote:

Originally Posted by Mike

The voodoo are adjusted at the outer ends of the control arms, bolts that face outwards

Yeah, you would have to turn the tire to one side to get in there to adjust and tighten. SPL's, all you need is 1/2"drive, 1/2" socket on an 18" extension going over the top of tire to adjust. To tighten, a 3/16" allen socket on a 3/8" drive extension, up from the bottom. No turning of the tire to side, then the other side to adjust and tighten. Rememeber I just been through this.

JAYNO20 · 11-10-2013, 12:56 PM

Are the SPL front camber arms or voodoo13 arms for sale anywhere yet? I wanted to adjust some of my negative camber out of the front, but didn't wanna go with SPC.

Rusty · 11-10-2013, 07:44 PM

Quote:

Originally Posted by JAYNO20

Are the SPL front camber arms or voodoo13 arms for sale anywhere yet? I wanted to adjust some of my negative camber out of the front, but didn't wanna go with SPC.

You can get the SPL arms from corner3garge now. Think the voodoo13 arms might be released next month.

cossie1600 · 11-11-2013, 12:19 AM

Any idea on the pricing? I am hoping to not spend $700 on camber arms arggggg

Rusty · 11-11-2013, 01:24 AM

Quote:

Originally Posted by cossie1600

Any idea on the pricing? I am hoping to not spend $700 on camber arms arggggg

Bend over and spread them. The SPL's are about $700. By the looks of the voodoo13's. They're going to be higher I bet when they come out.

cossie1600 · 11-11-2013, 01:42 AM

time to go work the street corner

Rusty · 11-11-2013, 01:51 AM

Quote:

Originally Posted by cossie1600

time to go work the street corner

Just pimp yourself here on the forum. Bet you get a few hits.

cossie1600 · 11-11-2013, 02:24 PM

Beats having no gf

GSS138 · 11-12-2013, 09:08 PM

Don't go cheap on the cambers. Ask mike at corner 3 about some of the SPC horror stories or find martin's link on the SPC rear cambers with pics of his car afterwards. I saw it first hand when they finally got it on a lift at corner 3...He's lucky to not be dead and it ruined his entire suspension + I don't know what else. 8 grand and 5 or so weeks later he is back on the track.

reeps · 11-14-2013, 08:19 AM

Quote:

Originally Posted by GSS138

Don't go cheap on the cambers. Ask mike at corner 3 about some of the SPC horror stories or find martin's link on the SPC rear cambers with pics of his car afterwards. I saw it first hand when they finally got it on a lift at corner 3...He's lucky to not be dead and it ruined his entire suspension + I don't know what else. 8 grand and 5 or so weeks later he is back on the track.

What if your not tracking? I am looking for some camber for the front but I just drive on the street around town and sometimes go for a trip from Vegas to LA? Any ideas on what you guys would recommend? Can I get away with other arms?

Sent from my SCH-I545 using Tapatalk

SPOHN · 11-14-2013, 10:36 AM

To me personally SPL for track. And SPC only for other uses. I don't care for the design of others. With the SPC make sure you tighten the top nut to about 125lbs. Also order extra bolts. There only like $5.

JAYNO20 · 11-14-2013, 10:46 PM

Quote:

Originally Posted by SPOHN

To me personally SPL for track. And SPC only for other uses. I don't care for the design of others. With the SPC make sure you tighten the top nut to about 125lbs. Also order extra bolts. There only like $5.

Same thing for spirited street driving?

Chuy · 11-15-2013, 09:52 AM

Just came from AMS website and they have the ball joint type, dont know if it replaces the joint or if its just a replacement.

Disreguard it's a replacement for aftermarket types.

Sh0velMan · 11-15-2013, 09:54 AM

I just wanna stress that the Kinetix arms are FINE for street driving and even the track if you're okay with a steel arm and more limited adjustment range.

Don't be afraid to give them a try, they're so inexpensive.

11-07-2013, 06:06 PM	#16 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	The voodoo are adjusted at the outer ends of the control arms, bolts that face outwards __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-10-2013, 12:56 PM	#18 (permalink)
JAYNO20 Track Member Join Date: Mar 2012 Location: Pittsburgh, PA Posts: 802 Drives: 2010 370Z Nismo Rep Power: 14	Are the SPL front camber arms or voodoo13 arms for sale anywhere yet? I wanted to adjust some of my negative camber out of the front, but didn't wanna go with SPC. __________________ 2010 Solid Red NISMO #0334 - SOLD 2014 Red Hot Camaro ZL1

11-12-2013, 09:08 PM	#25 (permalink)
GSS138 Track Member Join Date: Mar 2013 Location: Mission Viejo, CA Posts: 769 Drives: '12 370Z 6M Sport Rep Power: 13	Don't go cheap on the cambers. Ask mike at corner 3 about some of the SPC horror stories or find martin's link on the SPC rear cambers with pics of his car afterwards. I saw it first hand when they finally got it on a lift at corner 3...He's lucky to not be dead and it ruined his entire suspension + I don't know what else. 8 grand and 5 or so weeks later he is back on the track. __________________ Current Mods: Vorpal Weapon +5.

11-14-2013, 10:36 AM	#27 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	To me personally SPL for track. And SPC only for other uses. I don't care for the design of others. With the SPC make sure you tighten the top nut to about 125lbs. Also order extra bolts. There only like $5. __________________

11-15-2013, 09:52 AM	#29 (permalink)
Chuy Enthusiast Member Join Date: Apr 2010 Location: Colorado Springs Posts: 474 Drives: 2015 NISMO Rep Power: 15	Just came from AMS website and they have the ball joint type, dont know if it replaces the joint or if its just a replacement. Disreguard it's a replacement for aftermarket types. __________________ Miko 2015 Nismo Tech: nothing RIP Ginger 2009 370Z Sport Touring

11-11-2013, 12:19 AM	#20 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	Any idea on the pricing? I am hoping to not spend $700 on camber arms arggggg

11-11-2013, 01:42 AM	#22 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	time to go work the street corner

11-11-2013, 02:24 PM	#24 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	Beats having no gf

11-15-2013, 09:54 AM	#30 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	I just wanna stress that the Kinetix arms are FINE for street driving and even the track if you're okay with a steel arm and more limited adjustment range. Don't be afraid to give them a try, they're so inexpensive. __________________ Buy My Car! \| Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Front Camber and Toe Kit	SilverBullet	Wanted	2	09-21-2013 12:17 PM
[FOR SALE] AMS Front Camber Kit	DPE G	Parts for sale (Private Classifieds)	1	05-22-2013 04:44 PM
[FOR SALE] Spc front camber kit	blackonorange	Parts for sale (Private Classifieds)	2	11-28-2012 11:10 AM
[FOR SALE] SPC Front Camber Kit	W.O.W. 370Z	Parts for sale (Private Classifieds)	12	08-19-2012 09:28 PM
Front Camber vs. Rear Camber	osbornsm	Brakes & Suspension	2	02-21-2012 05:12 PM