Front camber arm selection?

cossie1600 · 11-05-2013, 12:16 AM

I am looking to get about 2 degree of camber on my car, the car would be used for track mostly. I am looking to see what options I have. It seems like the big companies are SPL and SPC. I do not like the Kinetic setup. Are there other good companies I am missing? I understand the SPL unit is awesome, but it is twice the price, is it really worth while to drop $700 for camber arms?

Also how hard is it to install it. I assume popping the balljoint at the top is the hardest?

Thanks

synolimit · 11-05-2013, 02:02 AM

Nothing wrong with the kinetix. It's proven.

BGTV8 · 11-05-2013, 03:01 AM

I had Eibach, just upgraded to SPL - reason, Eibach was getting more difficult to hold its camber as the car is getting more arduous track-day usage with more agressive settings. I have also moved away from 245/40R18 fronts to 265/35R18 fronts and am getting "a lot" more front-end grip.

RB

Grindkiezer · 11-05-2013, 03:06 AM

I have the SPC upper control arms, which I assume is the same as your control arms and they're awesome. You have soo much adjustability with them not only for camber but caster as well. I recommend getting them and even look around for a "combo pack" of the adjustable upper control arms as well as rear camber arms.

Plus very simple to install

Rusty · 11-05-2013, 10:59 AM

You have Doran arms (camber only), SPL arms (camber and caster, lots of adjustment for both), SPC arms (camber, very little caster) and then everyone else (camber only for the most part). I went with the SPL's. Worth the wait.

Here's my thread on the install to give you an idea on what it takes. Figure about 2hrs per side, depending on your skill level.

The Complete SPL Front Suspension

cossie1600 · 11-05-2013, 03:03 PM

I don't mind spl, just hard for me to sink 700 into it when I just dropped 2k on suspension

synolimit · 11-05-2013, 06:31 PM

Unless you reenforce SPC or eibach, they're gonna slip. The fact that SPC have broke in the rear makes me say no on that and any package deal. Doran are probably as much as SPL so you really only have a few few options. Drop the cash, spend more to make something better, or just get what others have with good luck at least for a easy install and no worries about changing alignment. I don't know enough about geo to constantly be at an alignment shop changing settings and spending money so whatever caster ends up being is what its gonna be.

cv129 · 11-05-2013, 07:48 PM

Do this if you must go with SPC and track...at least you will avoid slippage and having to pay to realign the car

"SPC camber arm fix"

synolimit · 11-05-2013, 08:30 PM

^^^That's the mod I'm taking about but by the time and money the OP spends modding the SPC he might as well buy the SPL.

However I had this idea about the SPC slippage...drill two holes, put bolts through with nuts holding them down, then drill holes in the corners of each bolt and two sides of the SPC large nut and safety wire it closed. If you torque to at least 150lbs and safety wire, it's going no where.

SPOHN · 11-05-2013, 08:43 PM

SPL is all you need. SPC is fine also as long as you torque to 150lbs but the nut on top won't last long and get stripped. But there very cheap to replace. And I worried about the rubber insert bushings giving out

Marti · 11-06-2013, 02:11 PM

SPL really is all you need, we sell other camber arms but the SPL is by far the most well designed arm.

It may cost more, but the benefits, ease of adjustability, and the fact that you can count on nothing coming loose, justify the price. At least for me

takjak2 · 11-06-2013, 08:30 PM

Corner4 garage made a couple sets in the Kinetix style with steel arms and metal sphericals.

If you can wait for later in winter I'll trade for your transponder.

Mike · 11-07-2013, 03:06 PM

the new voodoo13 arms look as solid and simpler to adjust than the SPL, and that isn't trying to knock on SPL either.

Sh0velMan · 11-07-2013, 04:48 PM

Quote:

Originally Posted by Mike

the new voodoo13 arms look as solid and simpler to adjust than the SPL, and that isn't trying to knock on SPL either.

Yeah, the SPL units look great, but the voodoo13 ones do look a lot simpler to set up and maintain.

Rusty · 11-07-2013, 05:45 PM

Quote:

Originally Posted by Mike

the new voodoo13 arms look as solid and simpler to adjust than the SPL, and that isn't trying to knock on SPL either.

I don't know about being simpler to adjust. The SPL's only need 3/16" allen to tighten down the adjustment points and a 1/2" socket to adjust the camber and caster. And you can reach them from over the top of the tire. The voodoo13 arms look like you need a wrench to tighten down the adjustment. That might be hard to get in there.

11-05-2013, 12:16 AM	#1 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	Front camber arm selection? I am looking to get about 2 degree of camber on my car, the car would be used for track mostly. I am looking to see what options I have. It seems like the big companies are SPL and SPC. I do not like the Kinetic setup. Are there other good companies I am missing? I understand the SPL unit is awesome, but it is twice the price, is it really worth while to drop $700 for camber arms? Also how hard is it to install it. I assume popping the balljoint at the top is the hardest? Thanks

11-05-2013, 02:02 AM	#2 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Nothing wrong with the kinetix. It's proven. __________________ 13 370z-

11-05-2013, 03:06 AM	#4 (permalink)
Grindkiezer Track Member Join Date: Sep 2012 Location: San Diego Posts: 824 Drives: A Car Rep Power: 14	I have the SPC upper control arms, which I assume is the same as your control arms and they're awesome. You have soo much adjustability with them not only for camber but caster as well. I recommend getting them and even look around for a "combo pack" of the adjustable upper control arms as well as rear camber arms. Plus very simple to install __________________ Z

11-05-2013, 10:59 AM	#5 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	You have Doran arms (camber only), SPL arms (camber and caster, lots of adjustment for both), SPC arms (camber, very little caster) and then everyone else (camber only for the most part). I went with the SPL's. Worth the wait. Here's my thread on the install to give you an idea on what it takes. Figure about 2hrs per side, depending on your skill level. The Complete SPL Front Suspension __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html Last edited by Rusty; 11-05-2013 at 11:04 AM.

11-05-2013, 06:31 PM	#7 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Unless you reenforce SPC or eibach, they're gonna slip. The fact that SPC have broke in the rear makes me say no on that and any package deal. Doran are probably as much as SPL so you really only have a few few options. Drop the cash, spend more to make something better, or just get what others have with good luck at least for a easy install and no worries about changing alignment. I don't know enough about geo to constantly be at an alignment shop changing settings and spending money so whatever caster ends up being is what its gonna be. __________________ 13 370z-

11-05-2013, 03:01 AM	#3 (permalink)
BGTV8 A True Z Fanatic Join Date: Dec 2009 Location: 03350 Australia Posts: 1,514 Drives: 09 Nissan 370Z M6 Rep Power: 39973	I had Eibach, just upgraded to SPL - reason, Eibach was getting more difficult to hold its camber as the car is getting more arduous track-day usage with more agressive settings. I have also moved away from 245/40R18 fronts to 265/35R18 fronts and am getting "a lot" more front-end grip. RB

11-05-2013, 03:03 PM	#6 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	I don't mind spl, just hard for me to sink 700 into it when I just dropped 2k on suspension

11-05-2013, 07:48 PM	#8 (permalink)
cv129 A True Z Fanatic Join Date: Jul 2011 Location: Dallas, TX Posts: 3,222 Drives: 09 Nismo, 16 Nismo Rep Power: 163995	Do this if you must go with SPC and track...at least you will avoid slippage and having to pay to realign the car "SPC camber arm fix"

11-05-2013, 08:30 PM	#9 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	^^^That's the mod I'm taking about but by the time and money the OP spends modding the SPC he might as well buy the SPL. However I had this idea about the SPC slippage...drill two holes, put bolts through with nuts holding them down, then drill holes in the corners of each bolt and two sides of the SPC large nut and safety wire it closed. If you torque to at least 150lbs and safety wire, it's going no where. __________________ 13 370z-

11-05-2013, 08:43 PM	#10 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	SPL is all you need. SPC is fine also as long as you torque to 150lbs but the nut on top won't last long and get stripped. But there very cheap to replace. And I worried about the rubber insert bushings giving out __________________

11-06-2013, 02:11 PM	#11 (permalink)
Marti A True Z Fanatic Join Date: Feb 2012 Location: Central Florida Posts: 2,090 Drives: TT SC300 Rep Power: 17	SPL really is all you need, we sell other camber arms but the SPL is by far the most well designed arm. It may cost more, but the benefits, ease of adjustability, and the fact that you can count on nothing coming loose, justify the price. At least for me __________________ Marti - Rev Works, Inc https://www.facebook.com/Revworks www.revworksinc.com / marti@revworksinc.com / aim: aimformarti 407-542-7863

11-06-2013, 08:30 PM	#12 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	Corner4 garage made a couple sets in the Kinetix style with steel arms and metal sphericals. If you can wait for later in winter I'll trade for your transponder. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

11-07-2013, 03:06 PM	#13 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	the new voodoo13 arms look as solid and simpler to adjust than the SPL, and that isn't trying to knock on SPL either. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
WTB: Front Camber and Toe Kit	SilverBullet	Wanted	2	09-21-2013 12:17 PM
[FOR SALE] AMS Front Camber Kit	DPE G	Parts for sale (Private Classifieds)	1	05-22-2013 04:44 PM
[FOR SALE] Spc front camber kit	blackonorange	Parts for sale (Private Classifieds)	2	11-28-2012 11:10 AM
[FOR SALE] SPC Front Camber Kit	W.O.W. 370Z	Parts for sale (Private Classifieds)	12	08-19-2012 09:28 PM
Front Camber vs. Rear Camber	osbornsm	Brakes & Suspension	2	02-21-2012 05:12 PM