The Complete SPL Front Suspension

Rusty · 06-28-2014, 06:48 PM

I checked my heim joints yesterday when I put my AM Perf oil pan on. My heim joints are still straight.

sixpax · 06-29-2014, 08:15 AM

you got the front tie rod ends as well ?

Rusty · 06-29-2014, 02:14 PM

Quote:

Originally Posted by sixpax

you got the front tie rod ends as well ?

You mean the sway bar links? Far as I know. SPL doesn't make tie rod ends.

Masterbeatty · 06-29-2014, 05:54 PM

Quote:

Originally Posted by Rusty

You mean the sway bar links? Far as I know. SPL doesn't make tie rod ends.

They do now. I was on their website yesterday eye humping the diff bushing kit.

I just checked again they don't. I must have clicked on the 350z page.

sixpax · 06-30-2014, 09:59 AM

SPL Front Outer Tie Rod Ends 370Z / G37

martin82 · 07-01-2014, 12:49 AM

Crap that's the only thing I don't have

ilovegirls · 10-05-2014, 01:22 AM

Why do the joints get twisted up like that?

Rusty · 10-05-2014, 11:17 AM

Quote:

Originally Posted by ilovegirls

Why do the joints get twisted up like that?

Think when they tighten up the bolts. The adjusters are in that postion to begin with. Never taking the time to straighten them out. When I had the Z aligned. The guy straighten them out, and they haven't move since.

SurfDog · 10-16-2014, 12:25 AM

Found it. Thanks I'm starting tomorrow.

littlejuanito · 02-04-2017, 01:34 PM

How are these SPL arms holding up so far Rusty?

Rusty · 02-04-2017, 01:40 PM

No issues so far. 15,000 miles and 20+ trackdays.

littlejuanito · 02-04-2017, 01:46 PM

Quote:

Originally Posted by Rusty

No issues so far. 15,000 miles and 20+ trackdays.

Seems I'm gonna go the SPL route. The horrible stories I read about the SPC's, kinetic, and even Z1's very own FUCA's have leave me no choice but to spend more money once and not have to deal with issues later. Wished these SPL's were a little cheaper but oh well... at least they're worth it. Any other SPL parts you recommend?

Rusty · 02-04-2017, 02:43 PM

Quote:

Originally Posted by littlejuanito

Seems I'm gonna go the SPL route. The horrible stories I read about the SPC's, kinetic, and even Z1's very own FUCA's have leave me no choice but to spend more money once and not have to deal with issues later. Wished these SPL's were a little cheaper but oh well... at least they're worth it. Any other SPL parts you recommend?

All of the SPL catalog.

OptionZero · 02-04-2017, 02:59 PM

Call SPL, tell them you have a Z34 and want everything. Then give them your credit card and be happy.

No, seriously, my alignment guy (who does all sorts of drift and race cars) was RAVING about how he uses SPL on all the shop cars, how its so much more enjoyable doing cars with SPL stuff.

They have a locking system that makes life a breeze. Full setup let you adjust everything and durable as hell.

Best part, once you have all the arms your wheel options are essentially limitless.

Practically speaking, the fronts are what you NEED. The rear of the Z has enough clearance stock camber spec is gonna be fine on most setups.

But if you're getting coilovers put on and adjusting height you might as well throw all the arms and do it right the first time

littlejuanito · 02-04-2017, 03:15 PM

Quote:

Originally Posted by OptionZero

Call SPL, tell them you have a Z34 and want everything. Then give them your credit card and be happy.

No, seriously, my alignment guy (who does all sorts of drift and race cars) was RAVING about how he uses SPL on all the shop cars, how its so much more enjoyable doing cars with SPL stuff.

They have a locking system that makes life a breeze. Full setup let you adjust everything and durable as hell.

Best part, once you have all the arms your wheel options are essentially limitless.

Practically speaking, the fronts are what you NEED. The rear of the Z has enough clearance stock camber spec is gonna be fine on most setups.

But if you're getting coilovers put on and adjusting height you might as well throw all the arms and do it right the first time

Yeah all the SPL stuff looks amazing

And I do have Powertrix Coilover already but couldn't do it all at once. I Wished I would have. Anyhow, I'm in dire need of front camber arms as I'm not symmmetrical on my camber readings... I'm actually off .7 degrees left from right and the car does not handle as I'd like.

I was able to get the rear within specs so I'm good on that end.

06-28-2014, 06:48 PM	#61 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I checked my heim joints yesterday when I put my AM Perf oil pan on. My heim joints are still straight. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

07-01-2014, 12:49 AM	#66 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Crap that's the only thing I don't have Rusty likes this.

10-05-2014, 01:22 AM	#67 (permalink)
ilovegirls Base Member Join Date: Sep 2014 Location: 760 Posts: 59 Drives: 370z Rep Power: 11	Why do the joints get twisted up like that? Rusty likes this.

10-16-2014, 12:25 AM	#69 (permalink)
SurfDog A True Z Fanatic Join Date: May 2012 Location: Colorado (9000 feet) Age: 56 Posts: 1,796 Drives: 09 6mt, 13 Sequoia, Rep Power: 15749	Found it. Thanks I'm starting tomorrow. GaleForce and Rusty like this. __________________ 09 6spd Berk CBE, JWT cams, ZSpeed CSC, Stillen (25 row oil, brake cooling, sways, gen3 CAI), Passport (9500ci), Quaife LSD, Z1 400 hp kit, ss lines, pads, rotors, clutch etc, Phunk's pan and fuel starve fix

02-04-2017, 01:34 PM	#70 (permalink)
littlejuanito Track Member Join Date: Jul 2014 Location: Sherman Oaks, CA Posts: 812 Drives: 2014 Touring Sport Rep Power: 419	How are these SPL arms holding up so far Rusty? Rusty likes this. __________________ Fast Intentions Non-Resonated Carbon Fiber CBE \| Berk Non-Resonated HFC \| Powertrix Coilovers \| RJM Clutch Pedal \| LatheWerks Shift Knob \| Stillen Sway Bars, \|SPL Parts \| Enkei RS05RR \| Fujimura Diffuser \| Ecutek Tuned by Seb \| 308whp

02-04-2017, 01:40 PM	#71 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,180 Drives: 2011 Nismo GM 6M Rep Power: 2684437	No issues so far. 15,000 miles and 20+ trackdays. littlejuanito likes this. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

02-04-2017, 02:59 PM	#74 (permalink)
OptionZero A True Z Fanatic Join Date: Apr 2011 Location: Sacramento Posts: 3,225 Drives: 15 370Z Nismo 6MT Rep Power: 214100	Call SPL, tell them you have a Z34 and want everything. Then give them your credit card and be happy. No, seriously, my alignment guy (who does all sorts of drift and race cars) was RAVING about how he uses SPL on all the shop cars, how its so much more enjoyable doing cars with SPL stuff. They have a locking system that makes life a breeze. Full setup let you adjust everything and durable as hell. Best part, once you have all the arms your wheel options are essentially limitless. Practically speaking, the fronts are what you NEED. The rear of the Z has enough clearance stock camber spec is gonna be fine on most setups. But if you're getting coilovers put on and adjusting height you might as well throw all the arms and do it right the first time cv129, Rusty and littlejuanito like this. __________________ OptionZero Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Complete Suspension Setup	Mitco39	Z1 Motorsports	0	01-19-2013 07:34 PM
WTB front suspension top hats.	Daishi9000	Wanted	1	11-05-2012 05:45 PM
[FOR SALE] Kinetix Complete camber/toe kit (front and Rear)	Kandy OrangeZ	Parts for sale (Private Classifieds)	16	09-28-2011 10:53 AM
2010 Nismo Complete Suspension	tu_clean	Parts for sale (Private Classifieds)	14	03-30-2011 04:36 PM
squek from front suspension	Zsteve	Nissan 370Z General Discussions	5	01-03-2010 11:56 AM