Originally Posted by kenchan im running stock endlinks on my kangaroo front swaybar. 3k miles no issue so far. otherwise my suspension is stock. car's already put away for winter
|
|
LinkBack | Thread Tools | Display Modes |
10-23-2013, 11:50 PM | #16 (permalink) |
Track Member
Join Date: Jul 2011
Location: Vancouver, BC
Posts: 642
Drives: 12 370Z GM AT
Rep Power: 15 |
So a rear bar is not really a must have on the Z?
__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates |
10-24-2013, 05:08 PM | #17 (permalink) | |
A True Z Fanatic
Join Date: May 2013
Location: Columbus, OH
Posts: 5,051
Drives: 2013 Silver 370z
Rep Power: 3389 |
Quote:
__________________
13 370z- |
|
10-25-2013, 12:19 AM | #18 (permalink) |
Base Member
Join Date: Jun 2011
Location: N. California
Posts: 42
Drives: 09 G37s Coupe
Rep Power: 14 |
Just to give the other side of the spectrum, I have stillen sways on my g37 coupe, with stock endlinks and KW v3's. I've done many track days with this setup and the stock endlinks are still ok. And I run the Stillen sways at full stiff F&R.
So perhaps it's just a wide distribution of strength and you hope to be lucky and fall on the strong side! |
10-27-2013, 03:08 PM | #19 (permalink) |
Enthusiast Member
Join Date: Nov 2012
Location: On open empty highways
Posts: 366
Drives: 40th anniversary
Rep Power: 13 |
Do I need to install end links if my car isn't lowered and I install the hotchkis sway bars? Sorry if I sound stupid but I'm not familiar w/ this stuff at all.
__________________
40th anniversary #450/1000 | Takeda Attack CAI | Ark DTS exhaust | to be continued... |
10-27-2013, 03:21 PM | #20 (permalink) |
Banned
Join Date: Feb 2011
Location: monticello new york 127
Posts: 1,095
Drives: 08 350z black 6m/t
Rep Power: 0 |
I got to smile
Getting after market sway bars. If you're not going all out road racing & do other suspension work as well, I see no point of doing that. I bet if you took your stock front or your rear sway bar out, almost nobody would notice.
Just to have front and rear sway bars is good. Not important subject to me, just saying |
10-27-2013, 03:30 PM | #21 (permalink) | |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539 |
Quote:
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
|
10-27-2013, 03:53 PM | #22 (permalink) | |
Banned
Join Date: Feb 2011
Location: monticello new york 127
Posts: 1,095
Drives: 08 350z black 6m/t
Rep Power: 0 |
I'll take your word but
Quote:
Subject is not important to me, and I know modding is part of the fun, but after holding & checking the stock sway bars, I feel it's probably the strongest part of the under car. Willing to listen/learn from someone that's involved & knows. "feels" "by the feel of my pants" are not my favorite answers. |
|
10-27-2013, 04:01 PM | #23 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539 |
Aftermarket sway bars, stock endlinks?
You're incorrect. Swapping out sways is a very noticeable difference. You've held the sways from a 370 in your hands? They're not particularly thick. Do a quick search and see how many people have positive experiences changing out the stock sways.
Finding a cheap used set of sways is easy and you can sell them for about what you paid for them give it a shot. You'll be shocked how much of a difference they make.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent Last edited by Chuck33079; 10-27-2013 at 04:09 PM. |
10-27-2013, 05:12 PM | #25 (permalink) |
Enthusiast Member
Join Date: Nov 2012
Location: On open empty highways
Posts: 366
Drives: 40th anniversary
Rep Power: 13 |
Soooooo I don't need new end links if my car isn't lowered?
__________________
40th anniversary #450/1000 | Takeda Attack CAI | Ark DTS exhaust | to be continued... |
10-27-2013, 05:19 PM | #26 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539 |
The stock ones will probably break at some point.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
10-27-2013, 05:30 PM | #28 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29539 |
Aftermarket sway bars, stock endlinks?
I don't remember offhand, but the Whitelines are pretty cheap as far as aftermarket ones go. Wait until the OEM ones break, then upgrade.
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
10-27-2013, 05:50 PM | #29 (permalink) |
Banned
Join Date: Feb 2011
Location: monticello new york 127
Posts: 1,095
Drives: 08 350z black 6m/t
Rep Power: 0 |
road course driving is not my specialty
I live in upstate N.Y. There are many lightly traveled country roads here. I used to, since I'm "special" "slightly touched in the head" do some very "spirited" driving.
The first thing I noticed when going fast on curvy roads was my car leaning to it's limits then the tires started to scream. For those not familiar with that scream, it's like when you're with a girl and, never mind. My biggest fear was the tires losing their grip or the rubber/tire slipping off the wheel. I think stiff sway bars would be a must for drifting. I think if my car didn't lean so much, I probably would have drifted into a tree. Now I'm a big believer in parts matching each other/working together. That post^^^^^^ you just posted helps me explain. Again, this is not my expertise, but I think just like a high performance camshafts can make you lose H.P. without matching H.D spring, & or upgraded exhaust, tune, gas, etc. etc. I think heavy duty sway bars need more stuff to be affective. Of course they may help in a right turn that you calls for 10mph & you make it at 15mph I'm open to listen & learn from you and more from people with road track experience. |
10-27-2013, 06:01 PM | #30 (permalink) |
Ronin Samurai - Assassin
Join Date: Dec 2011
Location: Fayettenam,Pennsyltucky
Age: 68
Posts: 35,187
Drives: 2011 Nismo GM 6M
Rep Power: 2684437 |
Stick with the stock end links for now. Eyeball them any time you're under the car.
__________________
浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
FOR SALE - Volks SF-Challenge Wheels, KW V3 Coilovers, SPL Endlinks, Sway bars | VolcanoG07 | Mid-Atlantic Region | 15 | 12-02-2013 09:48 AM |
[FOR SALE] stock front & rear sway bars | knight370z | Parts for sale (Private Classifieds) | 0 | 06-07-2013 07:27 PM |
WhiteLine Sway Bars and Rear Endlinks in Stock and Ready to Ship | KamiSpeed | Suspension/Brakes | 18 | 05-11-2012 02:03 PM |
Hotchkis Sway Bars & Stock End-links | pedZ | Brakes & Suspension | 6 | 11-02-2011 11:41 PM |
[FOR SALE] Stock Exhaust, Sway Bars, and Springs | iridefast | Parts for sale (Private Classifieds) | 1 | 07-18-2011 06:22 PM |