![]() |
Sway bar question, stock suspension...
I don't want to give to much info because some people just agree cause it sounds good or sounds like something they heard before. Like in nursing you have to think outside the box when given information and have to know about a few things to be able to answer a question. So ill give key points and I want someone to tell me the effect...??
Stock everything but front sway bar set to hardest setting. Sadly installed in the air and tightened there too, not compressed. Front camber- OEM -0.5 to -0.9 Rear camber- OEM -1.2 to -1.7 255 front, 285 rear tires |
Quote:
|
Quote:
|
Quote:
|
get an alignment? :confused: what is it that you are asking?
|
Quote:
|
Quote:
|
swaybars should have no effect on your alignment. I have aftermarket front and rear. Alignment is still perfectly fine. Also tightened in the air. Checked for tightness on the ground after 15 miles and again at 300 and again at 1000. Not one loose bolt.
But this isn't nursing. Give us all the info you can so we can help you get an answer. Leaving information out when it comes to cars will get you the wrong answer almost every time. What's the problem? |
yah, unless the swaybar is bent putting preload on the endlinks, shouldn't make any difference.
|
Quote:
If I said you get cancer cause its what god intended, a million people would agree with me cause that's what they believe or were told and the thread would be dead. But if I ask "why" to make you think, then we'll get the god comments along with the science comments which is what I'm looking for here. What's a large front sway do to a stock 370z basically? |
Quote:
|
Do you have adjustable end links on it?
|
i believe having on just a stiff front sway bar will give you understeer. i drove with just the front on before I put my rear in. you definitely need to balance it out.
|
Quote:
|
Quote:
|
All times are GMT -5. The time now is 01:22 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2