NISMO Circular Brake Ducts Using Revotec Inlets & Stillen Brake Cooling Kit

gurneyeagle · 09-12-2013, 08:32 PM

Quote:

Originally Posted by synolimit

Are your ducts sitting flush against the bumper? Looks like I'm gonna need screws because the 370z has no flat spots on the bumper.

The Nismo bumper is flatter along the bottom near the grille. I've got the ducts like Rusty, and even though the fit the bumper perfectly, I did need to secure them with screws.

DLo · 09-12-2013, 09:44 PM

I had to use screws as well.

Rusty · 09-12-2013, 11:32 PM

I bolted mine on with painted stainless and self-locking nuts on the inside.

synolimit · 09-14-2013, 11:54 PM

How did you mount your reducers to the revotecs? Glue?

DLo · 09-15-2013, 12:43 AM

And gorilla grip tape

Rusty · 09-15-2013, 09:36 AM

2 part glue.

DPT007 · 09-15-2013, 03:36 PM

Hi Dlo! Ran into you at Autoclub Speedway! Thanks for the heads up about this link! I am def, going to look into this upgrade for my Nismo

DLo · 09-15-2013, 09:58 PM

^ Excellent. Synolimit did these ducts and used the 3" inlets instead of the 4" inlets I used. I actually like the 3" better. I posted a link to the 3" to 2" reducer a few posts above. Either way you go won't let you down I'm sure!

Great driving BTW at ACS.

DPT007 · 09-17-2013, 01:59 AM

Quote:

Originally Posted by DLo

^ Excellent. Synolimit did these ducts and used the 3" inlets instead of the 4" inlets I used. I actually like the 3" better. I posted a link to the 3" to 2" reducer a few posts above. Either way you go won't let you down I'm sure!

Great driving BTW at ACS.

Check Out This Link!!

Auto Club Speedway September 8, 2013

synolimit · 09-17-2013, 02:10 AM

Nice! Haha

09-12-2013, 09:44 PM	#17 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	I had to use screws as well. hot_mic_64d likes this. __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

09-12-2013, 11:32 PM	#18 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I bolted mine on with painted stainless and self-locking nuts on the inside. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-14-2013, 11:54 PM	#19 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	How did you mount your reducers to the revotecs? Glue? __________________ 13 370z-

09-15-2013, 12:43 AM	#20 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	And gorilla grip tape __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

09-15-2013, 09:36 AM	#21 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	2 part glue. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

09-15-2013, 03:36 PM	#22 (permalink)
DPT007 Base Member Join Date: Nov 2012 Location: las vegas Posts: 37 Drives: 13 Nissan 370z NISMO Rep Power: 13	Hi Dlo! Ran into you at Autoclub Speedway! Thanks for the heads up about this link! I am def, going to look into this upgrade for my Nismo __________________ 2013 NISMO 370Z Pearl White \| Stock: 296RWHP/233WTQ

09-15-2013, 09:58 PM	#23 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	^ Excellent. Synolimit did these ducts and used the 3" inlets instead of the 4" inlets I used. I actually like the 3" better. I posted a link to the 3" to 2" reducer a few posts above. Either way you go won't let you down I'm sure! Great driving BTW at ACS. __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Brake Cooling Ducts	ResIpsa	DIY Section (Do-It-Yourself)	46	07-28-2014 10:46 PM
Installing Brake Cooling Ducts	osbornsm	Brakes & Suspension	4	03-26-2013 10:57 AM
STILLEN brake cooling kit	Kyle@STILLEN	Brakes & Suspension	154	02-27-2013 06:13 PM
Brake cooling ducts	lazer_Z	Brakes & Suspension	27	11-08-2011 12:17 PM
Brake Cooling Ducts?	my2004Z	Nissan 370Z General Discussions	6	05-06-2011 09:33 PM