Investment in the Z's Future

Rusty · 08-29-2013, 10:32 PM

I run the Racing Brake rotors front and rear. Z1 stainless lines, brake cooling ducts, Motul 600 brake fluid. For pads. I have EBC Yellowstuff. Not a bad pad for both DD and track. But I'm ready to go to Carbotechs. I've got 6 trackdays with no problems so far.

synolimit · 08-29-2013, 10:37 PM

I'd do Z1's since replacing the outer rotor should be cheaper than anything. I believe $200 something.

martin82 · 08-29-2013, 11:55 PM

The replacement rotor on the dba5000 outer ring is about 400$

synolimit · 08-30-2013, 12:00 AM

Quote:

Originally Posted by martin82

The replacement rotor on the dba5000 outer ring is about 400$

Screw that

osbornsm · 08-30-2013, 08:55 AM

Quote:

Originally Posted by mts

1) Are you sure you warped them? More often than not, the warped feeling is uneven pad deposits and can be fixed by a very light turning.

Oh yah, i re-bed the pads... to the rotors and still no resolution. Took it to the dealer and they turned the rotors for me under warranty... they were warped like Pringles. lol

Quote:

Originally Posted by mts

2) As someone else already said, the specific track pad you use can make a huge difference in rotor life. Some of them flat eat rotors.

I use Carbotech XP8 pads all the way around. They are very forgiving on rotors, unlike Hawks.

Quote:

Originally Posted by mts

3) I've run on DBA's before and my experience is they don't last anywhere close to 5x as long as OEM.

Well they've GOT to last longer than 2 days!!

Quote:

Originally Posted by V8Killer

Did you find a place that does a package deal on all 4 with pads and fluid?

Ahh, no... no package deals... but talk to Zspeed and ask for their DBA 5000 rotor deal... $535 is KILLER for this kind of setup.

...but then again, that's just my opinion, I could be wrong.

DEpointfive0 · 08-30-2013, 09:45 AM

Quote:

Originally Posted by martin82

The replacement rotor on the dba5000 outer ring is about 400$

Joe said outer rings are about $200

osbornsm · 08-30-2013, 09:53 AM

Quote:

Originally Posted by DEpointfive0

Joe said outer rings are about $200

WHEW... had me worried for a min there. EEK.

Sh0velMan · 08-30-2013, 09:55 AM

I've seen the replacement rings for ~$350 a pair.

That's really not bad at all, IMO.

synolimit · 08-30-2013, 10:07 AM

Quote:

Originally Posted by osbornsm

Oh yah, i re-bed the pads... to the rotors and still no resolution. Took it to the dealer and they turned the rotors for me under warranty... they were warped like Pringles. lol

I use Carbotech XP8 pads all the way around. They are very forgiving on rotors, unlike Hawks.

Well they've GOT to last longer than 2 days!!

Ahh, no... no package deals... but talk to Zspeed and ask for their DBA 5000 rotor deal... $535 is KILLER for this kind of setup.

...but then again, that's just my opinion, I could be wrong.

Not really when replacements are that expensive! Wouldn't you want cheaper replacements?

osbornsm · 08-30-2013, 10:50 AM

Quote:

Originally Posted by synolimit

Not really when replacements are that expensive! Wouldn't you want cheaper replacements?

Well, yes... obviously. But Replacement OEM rotors are ~$250 and replacement rotor rings for the DBA set are about $400.

I'm going for longevity here... but of course that has yet to prove itself.

synolimit · 08-30-2013, 11:41 AM

Quote:

Originally Posted by osbornsm

Well, yes... obviously. But Replacement OEM rotors are ~$250 and replacement rotor rings for the DBA set are about $400.

I'm going for longevity here... but of course that has yet to prove itself.

Z1 started their rotors in 09. By now they're proven. I believe they said $200 for replacement so I'd of gone cheaper since it seems to happen a lot to you. But it's done now so whatever.

PS, how the hell you going to replace them? Do you own that 3 star screw bit?

synolimit · 08-30-2013, 11:53 AM

Quote:

Originally Posted by osbornsm

Am I missing something? I popped this cover and the frame is there. How am I supposed to get the brake hose in there?

osbornsm · 08-30-2013, 12:16 PM

Quote:

Originally Posted by synolimit

Am I missing something? I popped this cover and the frame is there. How am I supposed to get the brake hose in there?

Left side and RIGHT side are routed differently. Had to cut the FRP plastic to make room for the hoze.

Quote:

Originally Posted by synolimit

PS, how the hell you going to replace them? Do you own that 3 star screw bit?

Nahh, the nuts / bolts need to be torqued very specifically and w/ high temp loctite. Not to mention the 3 start bit.
- I would ONLY trust a shop to re-install new rotors, not me.

DEpointfive0 · 08-30-2013, 12:30 PM

Quote:

Originally Posted by synolimit

Z1 started their rotors in 09. By now they're proven. I believe they said $200 for replacement so I'd of gone cheaper since it seems to happen a lot to you. But it's done now so whatever.

PS, how the hell you going to replace them? Do you own that 3 star screw bit?

I don't mean to knock Z1... But...
I think DBA is more proven because its not just ONE platform, or ONE car, and I doubt they have made or sold more than 100 sets.

Now, I know DBA some problems a few years ago, but hey, when you mass produce stuff, shít will invariably happen every once in a while. Especially when you don't know how products were BEATEN around a track.

Also, yes I have that star 3 tip screw bits! Harbor Freight FTW!!!

Voice59 · 08-30-2013, 01:34 PM

Quote:

Originally Posted by V8Killer

EBC Akebono Sport Brake Upgrade Package Lines, Pads, Rotors +

Woww.. I have this exact same set up minus their stainless steel lines. I have Z1's. I have no issues with mine at all.

08-29-2013, 10:32 PM	#16 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,187 Drives: 2011 Nismo GM 6M Rep Power: 2684437	I run the Racing Brake rotors front and rear. Z1 stainless lines, brake cooling ducts, Motul 600 brake fluid. For pads. I have EBC Yellowstuff. Not a bad pad for both DD and track. But I'm ready to go to Carbotechs. I've got 6 trackdays with no problems so far. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-29-2013, 10:37 PM	#17 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	I'd do Z1's since replacing the outer rotor should be cheaper than anything. I believe $200 something. __________________ 13 370z-

08-30-2013, 09:55 AM	#23 (permalink)
Sh0velMan A True Z Fanatic Join Date: Jan 2012 Location: Dallas/Ft.Worth Posts: 3,349 Drives: Noisily. Rep Power: 20	I've seen the replacement rings for ~$350 a pair. That's really not bad at all, IMO. osbornsm likes this. __________________ Buy My Car! \| Build Thread

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Future of the Z?	KERMIT	Nissan 370Z General Discussions	37	08-01-2012 05:20 AM
Investment opportunities in healthcare	RoadZter	The Lounge (Off Topic)	2	01-26-2012 09:11 AM
Porter cable, best investment	azn370z	Detailing / Washing / Waxing / Cosmetic Maintenance and Repair	16	05-08-2011 09:45 PM
370 in my future?	blueVQ	New Forum Member	3	10-02-2009 03:27 PM
Why the Z might be a GOOD investment	Mergnthwirker	Nissan 370Z General Discussions	10	07-15-2009 01:18 AM

08-29-2013, 11:55 PM	#18 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	The replacement rotor on the dba5000 outer ring is about 400$