Lowering Springs Comparisons

Hotrodz · 07-13-2016, 09:15 PM

You are welcome!

old guy · 01-18-2017, 04:38 PM

After reading through ( skimming ) all the posts ..... Has anyone just lowered the rear of the car?
Looking at my all stock Z, it looks as if I lowered it an inch the stance would be perfect.

Thoughts, comments.....

King · 01-24-2017, 01:34 AM

Quote:

Originally Posted by old guy

After reading through ( skimming ) all the posts ..... Has anyone just lowered the rear of the car?
Looking at my all stock Z, it looks as if I lowered it an inch the stance would be perfect.

Thoughts, comments.....

I bought my z used, I was staring at it sunday thinking about lowering it, and I noticed my rear actually looked as if it had been lowered. There is definitely less wheel clearance in the rear than the front, and it appears to have a visible negative camber, on the rear.

This might explain some of the odd handling behavior I have been noticing. It was raining though so I didn't get down to inspect it.

jchammond · 01-24-2017, 03:53 AM

Quote:

Originally Posted by King

I bought my z used, I was staring at it sunday thinking about lowering it, and I noticed my rear actually looked as if it had been lowered. There is definitely less wheel clearance in the rear than the front, and it appears to have a visible negative camber, on the rear.

This might explain some of the odd handling behavior I have been noticing. It was raining though so I didn't get down to inspect it.

From the factory; Z's have twice the negative camber on rear vs. front.
They also have twice as much positive toe.
19 gallon fuel cell will affect the height difference in rear-pending how much you have on.
Hope this help's.
ps: be sure the surface is perfectly level & flat...as with the independent everything;will make a difference on measurement's.

shadow85 · 03-27-2017, 08:23 AM

Hey fellas can I have some opinions on Eibach vs H&R vs Swift springs.

Currently I can get new Eibach springs for $230 USD locally in Australia. I would get Swift springs, but I would have to order them from the US $314 USD plus shipping to here which won't be cheap.

Is it worth if or should I get the Eibachs here and call it a day?

Cheers.

cooltoy · 03-27-2017, 09:39 AM

They each have a different amount of drop and spring rates.

shadow85 · 03-27-2017, 02:16 PM

Yep I know the Swifts drop 1
~1.2" on the front and the Eibach ~0.9".

Performance wise, should I fork out the extra $ for the swifts, or since I can get the Eibachs cheaper locally go for that one?

Chuck33079 · 03-27-2017, 02:29 PM

Whichever you do, budget for camber arms and toe bolts.

cooltoy · 03-27-2017, 05:01 PM

Spring rates will affect the type of ride quality you will have. Otherwise they all reputable companies.

shadow85 · 03-27-2017, 05:20 PM

Quote:

Originally Posted by Chuck33079

Whichever you do, budget for camber arms and toe bolts.

My mechanic said I should lower the car to camber the wheels in slightly more, but he did not mention to get camber arms while I am at it. What will I need the camber arms for?

Chuck33079 · 03-27-2017, 05:39 PM

Quote:

Originally Posted by shadow85

My mechanic said I should lower the car to camber the wheels in slightly more, but he did not mention to get camber arms while I am at it. What will I need the camber arms for?

You will have issues getting it aligned. Oem does not allow adjustment. Buy camber arms and toe bolts or spend a lot more in tires.

shadow85 · 03-27-2017, 11:18 PM

Ok so I am going to grab the eibachs as I can get it cheap here. And eibach alighnment kit.

cooltoy · 03-27-2017, 11:29 PM

Fyi

Quote:

Originally Posted by zbrah

the swifts are specifically designed to work with your oem struts so they won't put much more stress than oem spring. I've had an og member telling me he is still running on his oe shocks 2 years after the swift installed, even with the occasional hard driving on the track. About 90% of the owners here use swift spring, and for good reason.

Quote:

Originally Posted by trips

yes.

Remember that the more of a drop the shorter the shock life when it comes to lowering springs.

So you may be saving money on the springs, but might end up spending it on the shocks eventually.

shadow85 · 03-28-2017, 04:41 AM

But the Eibach has a less drop than the Swifts and also has a closer load rating to OEM.

Read somewhere that it is better to keep load rating closer to OEM. Not sure if that is true.

Chuck33079 · 03-28-2017, 07:57 AM

Quote:

Originally Posted by shadow85

Ok so I am going to grab the eibachs as I can get it cheap here. And eibach alighnment kit.

Isn't that kit just toe bolts? Make sure you get the arms as well if they're not included.

07-13-2016, 09:15 PM	#106 (permalink)
Hotrodz A True Z Fanatic Join Date: Aug 2012 Location: NW, AZ Posts: 9,330 Drives: 10 Nissan 370z Nismo Rep Power: 2684385	You are welcome! __________________ *Fast Intentions TT Installed and Tuned by Seb at SpecialtyZ 610whp 560tq:\|Fast Intentions 3" TT-TDX*\|SpecialtyZ/Fast Intentions 72 Row Oil Cooler\|SZ 6 Puck Clutch & Flywheel\|3GsCustoms\|Z1\|Wavetrac\|Hotchkis\|Whiteline \|Blitz\|Fortune Auto 500\|Fujimura\|SPL\|H&R\|TK\|TWM\|RPM Rollbar\|Sparco\|Next Level Performance\|TrackSpec\|AeroFlow Dynamics\|Pioneer\|

03-27-2017, 09:39 AM	#111 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	They each have a different amount of drop and spring rates. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

03-27-2017, 02:29 PM	#113 (permalink)
Chuck33079 A True Z Fanatic Join Date: Nov 2011 Location: Houston Posts: 12,265 Drives: 2011 370ztt Rep Power: 29539	Whichever you do, budget for camber arms and toe bolts. Memphis370Z and YYZ like this. __________________ 2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent

03-27-2017, 05:01 PM	#114 (permalink)
cooltoy Elite Member Join Date: Jun 2012 Location: Calgary Posts: 13,971 Drives: 14 PW 370Z S/T MT Rep Power: 243722	Spring rates will affect the type of ride quality you will have. Otherwise they all reputable companies. __________________ Member of kenchan's "photoshopped mods" and "proper offsets" gang.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Lowering springs	Z370Z011	Brakes & Suspension	37	02-18-2014 11:23 AM
ARK lowering springs	Bigd4mcc	Suspension/Brakes	0	02-13-2013 05:15 AM
wtb lowering springs	BRI888	Northern California Region	2	06-11-2011 03:18 AM
WTB: H&R Lowering Springs	KcL@AOI	Wanted	6	07-27-2010 11:35 PM
H&R Lowering Springs?	CBRich	Brakes & Suspension	8	03-01-2010 01:35 PM

01-18-2017, 04:38 PM	#107 (permalink)
old guy A True Z Fanatic Join Date: Apr 2015 Location: S.E. Michigan Age: 68 Posts: 2,710 Drives: 13 magma touring Rep Power: 2684369	After reading through ( skimming ) all the posts ..... Has anyone just lowered the rear of the car? Looking at my all stock Z, it looks as if I lowered it an inch the stance would be perfect. Thoughts, comments.....

03-27-2017, 08:23 AM	#110 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 918 Drives: 15' 370Z A/T AMM TT Rep Power: 25	Hey fellas can I have some opinions on Eibach vs H&R vs Swift springs. Currently I can get new Eibach springs for $230 USD locally in Australia. I would get Swift springs, but I would have to order them from the US $314 USD plus shipping to here which won't be cheap. Is it worth if or should I get the Eibachs here and call it a day? Cheers.

03-27-2017, 02:16 PM	#112 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 918 Drives: 15' 370Z A/T AMM TT Rep Power: 25	Yep I know the Swifts drop 1 ~1.2" on the front and the Eibach ~0.9". Performance wise, should I fork out the extra $ for the swifts, or since I can get the Eibachs cheaper locally go for that one?

03-27-2017, 11:18 PM	#117 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 918 Drives: 15' 370Z A/T AMM TT Rep Power: 25	Ok so I am going to grab the eibachs as I can get it cheap here. And eibach alighnment kit.

03-28-2017, 04:41 AM	#119 (permalink)
shadow85 Track Member Join Date: Jul 2015 Location: South Australia, Austra Posts: 918 Drives: 15' 370Z A/T AMM TT Rep Power: 25	But the Eibach has a less drop than the Swifts and also has a closer load rating to OEM. Read somewhere that it is better to keep load rating closer to OEM. Not sure if that is true.