Shaky Steering After Spacers

eastexZ · 08-09-2013, 11:44 PM

Hello to all... Last week I installed eibach pro 4 springs and ordered 15mm front and 20mm for the rear. Stock 19" Rays. I purchased Garageline spacers and installed them and drove my car home. Holy crap i can't go over 35 without the steering wheel shaking and I mean moving left and right.... I realize I dindnt do something correct with all the shakin. Maybe I didnt center them up??? Or is this because I just need an alingment??? Your input is certainly appreciated. Thanks

DEpointfive0 · 08-09-2013, 11:47 PM

Are they bolt on?

And your install was incorrect. 99.999999% of spacer issues come down to user error

eastexZ · 08-09-2013, 11:52 PM

Yes, they are bolt on. And I definitely know I did something wrong just not sure what.

Trips · 08-09-2013, 11:56 PM

You need to make sure you torqued the nuts to spec using a torque wrench in the cris-cross pattern.

Im hoping you also install the hubcentric rings that came with them

DEpointfive0 · 08-10-2013, 12:00 AM

Quote:

Originally Posted by eastexZ

Yes, they are bolt on. And I definitely know I did something wrong just not sure what.

What you screwed up on is that on the front you need AT LEAST 20mm... On some cars the studs are like 21mm

eastexZ · 08-10-2013, 12:01 AM

Well, I sure didnt. Good thing I didnt throw the box away. I sure hope they included those. Box at work so ill sure check monday morning.

Trips · 08-10-2013, 12:05 AM

Quote:

Originally Posted by eastexZ

Well, I sure didnt. Good thing I didnt throw the box away. I sure hope they included those. Box at work so ill sure check monday morning.

Yea, You definitely need to slide them in

I don't think you will need to remove the spacers to get them on.

eastexZ · 08-10-2013, 12:13 AM

Yep, im gonna learn that reading directions can certainly be beneficial.

eastexZ · 08-10-2013, 12:17 AM

Quote:

Originally Posted by DEpointfive0

What you screwed up on is that on the front you need AT LEAST 20mm... On some cars the studs are like 21mm

I was thinking that the 15mm and 20mm was a common setup. I may have got that info mixed up or something.

DEpointfive0 · 08-10-2013, 12:20 AM

Quote:

Originally Posted by eastexZ

I was thinking that the 15mm and 20mm was a common setup. I may have got that info mixed up or something.

For stud replacement, maybe.

Zbrah · 08-10-2013, 12:20 AM

I think he's talking about the stud size not the size of your spacers

eastexZ · 08-10-2013, 12:24 AM

Quote:

Originally Posted by Zbrah

I think he's talking about the stud size not the size of your spacers

Oh, ok.

Zbrah · 08-10-2013, 12:24 AM

I'd reinstall each spacer and make sure you clean the surface of the hub and torque each spacer in star pattern then get your car on the alignment rack.

DEpointfive0 · 08-10-2013, 12:28 AM

Quote:

Originally Posted by Zbrah

I'd reinstall each spacer and make sure you clean the surface of the hub and torque each spacer in star pattern then get your car on the alignment rack.

Not the issue, you can't install 15mm on the front

Trips · 08-10-2013, 12:33 AM

Quote:

Originally Posted by DEpointfive0

Not the issue, you can't install 15mm on the front

You can if you either do a stud replacement or ghetto it and trim the studs so there not going past the spacer so the wheel is flush.

If remember right

If the Op would use 20mm? all this extra work can be avoided plus the 5mm difference is tiny when looking at it from a distance

08-09-2013, 11:44 PM	#1 (permalink)
eastexZ Base Member Join Date: Jul 2013 Location: texas Posts: 32 Drives: 2013 370Z Gun Auto Rep Power: 12	Shaky Steering After Spacers Hello to all... Last week I installed eibach pro 4 springs and ordered 15mm front and 20mm for the rear. Stock 19" Rays. I purchased Garageline spacers and installed them and drove my car home. Holy crap i can't go over 35 without the steering wheel shaking and I mean moving left and right.... I realize I dindnt do something correct with all the shakin. Maybe I didnt center them up??? Or is this because I just need an alingment??? Your input is certainly appreciated. Thanks

08-09-2013, 11:47 PM	#2 (permalink)
DEpointfive0 Premium Member Bitches Join Date: Jan 2012 Location: SoCal Posts: 14,824 Drives: a lot Rep Power: 17152	Are they bolt on? And your install was incorrect. 99.999999% of spacer issues come down to user error __________________ Do YOU want to know what/where I got my username from? ( Click to show/hide ) NSFW due to language:

08-09-2013, 11:56 PM	#4 (permalink)
Trips Administrator Join Date: May 2009 Location: Disneyland, Ca Posts: 8,732 Drives: 🔰 Rep Power: 10	You need to make sure you torqued the nuts to spec using a torque wrench in the cris-cross pattern. Im hoping you also install the hubcentric rings that came with them Felix 808 likes this. __________________

08-10-2013, 12:13 AM	#8 (permalink)
eastexZ Base Member Join Date: Jul 2013 Location: texas Posts: 32 Drives: 2013 370Z Gun Auto Rep Power: 12	Yep, im gonna learn that reading directions can certainly be beneficial. Felix 808 likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] Looking to trade 15mm and 20mm drs H&R TRAK+ spacers for drm spacers	Amelio1217	Parts for sale (Private Classifieds)	14	06-05-2013 02:04 PM
[FOR SALE] Two 25mm spacers with studs ,two 10mm spacers , socal.	Chaddrift	Parts for sale (Private Classifieds)	2	02-18-2013 02:20 PM
steering noise after installing spacers	Alexshen1	Wheels & Tires	2	05-29-2012 06:25 PM
[FOR SALE] Pioneer AVH-P4200DVD, PAC steering wheel control, Metra dash kit, 6.5 door spacers	Danny3.7	Parts for sale (Private Classifieds)	6	08-06-2011 07:18 AM
Fs: H&r 20mm rear spacers / 15mm front spacers	xbigb4ller69z	Parts for sale (Private Classifieds)	25	12-10-2010 01:20 PM

08-09-2013, 11:52 PM	#3 (permalink)
eastexZ Base Member Join Date: Jul 2013 Location: texas Posts: 32 Drives: 2013 370Z Gun Auto Rep Power: 12	Yes, they are bolt on. And I definitely know I did something wrong just not sure what.

08-10-2013, 12:01 AM	#6 (permalink)
eastexZ Base Member Join Date: Jul 2013 Location: texas Posts: 32 Drives: 2013 370Z Gun Auto Rep Power: 12	Well, I sure didnt. Good thing I didnt throw the box away. I sure hope they included those. Box at work so ill sure check monday morning.

08-10-2013, 12:20 AM	#11 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	I think he's talking about the stud size not the size of your spacers

08-10-2013, 12:24 AM	#13 (permalink)
Zbrah A True Z Fanatic Join Date: May 2013 Location: The370Z.com Posts: 4,956 Drives: 370Z Rep Power: 5452	I'd reinstall each spacer and make sure you clean the surface of the hub and torque each spacer in star pattern then get your car on the alignment rack.