Just got the GT Spec chassis braces installed today on my 2012 Nismo. Front Rear I was skeptical about being able to feel any difference but I must admit, they
|
|
LinkBack | Thread Tools | Display Modes |
07-16-2013, 09:29 PM | #1 (permalink) |
A True Z Fanatic
Join Date: Jul 2012
Location: N/A
Posts: 1,430
Drives: N/A
Rep Power: 15 |
GT Spec Chassis Braces [6-Point Front & 2-Point Rear] Installed on Nismo Review
Just got the GT Spec chassis braces installed today on my 2012 Nismo.
Front Rear I was skeptical about being able to feel any difference but I must admit, they do make quite a difference. I cannot say whether or not they make the car "faster", but believe it or not they actually make the ride in my Nismo quite a bit smoother! I was not expecting that. The car feels MUCH more solid and does not rattle over bumps anymore. I always assumed that the ride was so rough due to the stiff suspension of the Nismo, but now the car soaks up bumps much better. Very nice surprise. Turn-in is quicker with more precise steering feel and there is less understeer. The car felt more neutral through a couple high-speed sweepers (on ramps) and definitely felt more "planted". Also, I do not seem to be spinning the rear tires as much, although I only did a couple WOT runs so this may just be a coincidence. Overall, I am very pleased. Is it a MUST have? Probably not. But if you want to liven up the handling and smooth out the ride of your 370Z, I would recommend it. Purchased and installed at Jotech Motorsports in Garland, TX.
__________________
2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel Last edited by jcosta79; 07-17-2013 at 04:27 PM. |
07-17-2013, 12:26 AM | #2 (permalink) |
Track Member
Join Date: Oct 2011
Location: South Florida
Posts: 882
Drives: 12 PW 370z 6MT Sport
Rep Power: 15 |
Good review.
I'm very interested in the bars myself, and I want to do the whole package - 6pt, 4pt, and 2pt.
__________________
2012 Pearl White 370Z GReddy Twin Turbo
|
07-17-2013, 04:25 PM | #4 (permalink) |
A True Z Fanatic
Join Date: Jul 2012
Location: N/A
Posts: 1,430
Drives: N/A
Rep Power: 15 |
Check it out here (too large to post): http://www.gtspec.com/sites/default/files/_DSC0142.JPG
There is also a 4-point front brace that goes with this kit, but Jotech did not have it in stock. I ordered it and will have it installed as soon as it arrives.
__________________
2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel |
07-17-2013, 05:12 PM | #5 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29538 |
How much ground clearance did you lose with the front brace? Does the rear work with aftermarket toe bolts?
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
07-17-2013, 05:16 PM | #6 (permalink) | |
A True Z Fanatic
Join Date: Jul 2012
Location: N/A
Posts: 1,430
Drives: N/A
Rep Power: 15 |
Quote:
No idea about the rears. All my suspension is stock Nismo stuff.
__________________
2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel |
|
07-17-2013, 05:18 PM | #7 (permalink) |
A True Z Fanatic
Join Date: Nov 2011
Location: Houston
Posts: 12,265
Drives: 2011 370ztt
Rep Power: 29538 |
So the front brace is now the lowest point of the car?
__________________
2011 MB Touring-Sport-6sp-Nav/GTM TT/FI TT TDX/JTran/Kosmic/Eibach/Hotchkis/SPC/CSF/RPS/SoThatsWhereAllMyMoneyWent |
07-18-2013, 12:22 AM | #8 (permalink) |
A True Z Fanatic
Join Date: Jul 2012
Location: N/A
Posts: 1,430
Drives: N/A
Rep Power: 15 |
Not sure if the nose is lower; they look to be about the same level.
__________________
2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel |
08-08-2013, 07:08 PM | #9 (permalink) |
A True Z Fanatic
Join Date: Jul 2012
Location: N/A
Posts: 1,430
Drives: N/A
Rep Power: 15 |
4-Point Brace Now Installed
I finally got the front 4-point brace installed. I cannot overstate how much more solid the car feels now, especially over bumps and rough pavement. If you think our chassis cannot be made stiffer, you are mistaken. The car now feels more like a stiffly sprung Mercedes and not a Z-car.
Again, unless you are tracking the car, it's not going to make you "faster", but these parts are definitely NOT placebos. They absolutely make a difference. My cell phone is the suck at taking pics.
__________________
2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel |
08-08-2013, 09:03 PM | #11 (permalink) |
A True Z Fanatic
Join Date: Jul 2012
Location: N/A
Posts: 1,430
Drives: N/A
Rep Power: 15 |
About $950 for all 3 bars including tax and labor for installation.
__________________
2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel |
12-01-2013, 12:48 AM | #12 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: Houston
Posts: 1,589
Drives: '12 GM Nismo # 0445
Rep Power: 16 |
Since this post was created almost four months ago, do you have any new news for us about the braces? I'm sure things have settled & you have gotten more of a feel of this. I have been eye balling these braces. I wanted to see what your thought was after the fact & that it has been almost four months since you installed the braces. I would have to assume your still impressed with the purchase.
Has anyone else purchased this & if so what do u think?
__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l Last edited by MacLean; 12-01-2013 at 02:14 AM. |
12-01-2013, 11:27 AM | #14 (permalink) |
A True Z Fanatic
Join Date: Apr 2012
Location: Houston
Posts: 1,589
Drives: '12 GM Nismo # 0445
Rep Power: 16 |
Supposedly the 6 point brace would work if you have HFC, TP, or LTH. There is a 4 point brace, but I have not heard anything about it.
__________________
l Meisterschaft Full Cat-Back Exhaust l F. I. Resonated High Flow Cats l Stillen Gen 3 l M370 Intake Manifold l UpRev l JWT Clutch & Flywheel l ZSpeed HD CSC l Stillen 19 Row Oil Cooler l ZSpeed Powercoated Under Tray l GTSpec: 6, 4, 2 Point Brace l |
12-01-2013, 01:53 PM | #15 (permalink) |
Enthusiast Member
Join Date: Mar 2009
Location: Dallas, Tx
Posts: 361
Drives: 2015 370z Sport Tech
Rep Power: 16 |
I had the same kit on my 2008 G35S sedan and 2011 G37S coupe...took care of all the body flex on that long chassis and made a huge difference.
I can't recommend them enough. I'm surprised by your findings tho - but it's good to know. Not sure if i'll do it again...but who knows when my boredom will kick in! |
Bookmarks |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GT Spec Chassis Braces | Coz@Czp | Suspension/Brakes | 6 | 02-01-2016 03:32 PM |
Gt spec 6 point underbrace, now available at amplified motorsport | LOU@AMPLIFIED | Suspension/Brakes | 8 | 09-26-2012 02:11 PM |
DIY: GT-SPEC 4-Point Ladder Bar | Equinox | DIY Section (Do-It-Yourself) | 7 | 07-14-2012 06:45 AM |
SOLD: a couple GT Spec chassis braces | clintfocus | Parts for sale (Private Classifieds) | 3 | 01-06-2012 12:08 AM |
[FOR SALE] GT SPEC 4 point ladder brace | ncheung85 | Parts for sale (Private Classifieds) | 4 | 10-28-2011 11:14 PM |