New 370Z BBK Option

bullitt5897 · 02-15-2010, 12:34 AM

I know the brakes need to be re-bled with a power bleeder. there is some air in the lines still and I will have FP take a look at that. I will also take a look at the pads and see if it has to do with the pad wear cause that just showed up in the past two days. BTW it is only on that one rotor the rest have full contact.

Josh@STILLEN · 02-15-2010, 12:36 AM

Cool.. you can check and see if debris has made its way into the pads.. it's possible to get a rock or something lodged in there..

bullitt5897 · 02-15-2010, 12:45 AM

thats probably what it is seeing as I had to drive down some gravel roads the on saturday and it was hell!

Mike@Blackline · 02-15-2010, 12:49 AM

Quote:

Originally Posted by Josh@STILLEN

Cool.. you can check and see if debris has made its way into the pads.. it's possible to get a rock or something lodged in there..

yeah good call probably got something wedged in there, odd that it wouldnt get kicked out though. lmk if thats not the case and if you have any Qs about it/need help troubleshooting Mike, you got my cell!

bullitt5897 · 02-15-2010, 12:54 AM

Thanks Mike I will do that

Josh@STILLEN · 02-15-2010, 12:57 AM

lol.. may sound dumb.. but a lot of times it works..

Find an empty area.. run the car up in reverse at a good clip and hammer the brakes.. sometimes that's all it needs.. just a different direction to knock it loose.

and it's a different sensation.. kinda fun..

bullitt5897 · 02-15-2010, 01:01 AM

lol these stop so hard it would be a weird feeling going backwards!

FuszNissan · 02-15-2010, 08:55 AM

JB-370z · 02-15-2010, 09:19 AM

Im wondering is stoping sooo fast a good thing??? At high speeds I know it can cause the car to lose control.

bullitt5897 · 02-15-2010, 09:36 AM

JB its a solid feel when braking with these brakes. The car remains completely stable under heavy braking on my setup. I have done several 60-0 then 70-0 then 80-0 back to back runs so far with no fade and stable braking control throughout the entire series of braking. I am so glad i have a few streets around the office where I can do this

After the car gets back from FP I will do the braking tests and give everyone solid numbers to run by.

bullitt5897 · 02-15-2010, 09:41 AM

when I say back to back I mean 60-0 then floor it till I reach 70 and then brake to 0 then floor it again... I did this process for a few miles to really try and punish these brakes!!! and they just keep taking it. This was also in sub freezing temps and the brakes were quick to stop. After I got off the lonely side street with no traffic I pulled onto the main road and when I pulled into line at the light smoke was coming out of my wheel wells

people were looking at me like OMG!!! I just smiled hehehe

JB-370z · 02-15-2010, 06:39 PM

Thanks for helping make my decision bullitt. I ordered them today and it looks like it will be 1-1/2 months before I get them to my house. Not really a big deal because my 19" SSR's have about a month or so left before they get to my house.
I opted to get them in a custom poweder coated red. 15" front with 8 pistons and 14" rear with 6 pistons. I went with the drilled and slotted, I know I am going to get $hit from some of yall for going that route. The nice dude named Mike threw in some free stainless steel lines all around too, not sure what kind though! Plus free shipping. After the sale is over these things are going to cost more. Someone want to give me an idea of what brake fluid to use?? I track once a month if that, and I am not a crazy driver on the streets! Does endless make street fluid?? How much does a shop charge to put these on??

1slow370 · 02-17-2010, 02:05 AM

yeah three short runs like that is nothing hell my akebono's with stock pads and fluid did 5 stops 150-20 and they faded on 4 and were gone after 5 (pads were covered in metal, rotors were HOOTT and scarred to hell). now i have stoptech front rotors(the rears were fine) and hawk pads. Going to be looking at getting some different rotors and picking up some carbotech xp10-xp8 pads for the front-rear, some stainless lines, and some ate superblue fluid.

bullitt5897 · 02-17-2010, 08:26 AM

slow, I did more than three stops I did like nine... and i didnt even let the brakes cool enough before pounding them hard again. like I said these will be properly tested once I get the car back.

AZP Installs · 02-17-2010, 09:07 AM

Quote:

Originally Posted by bullitt5897

Hey I track my cars regularly guys... "show/poser" my A$$... lol I will post up a review and track experiences that I have with the new brakes

Please do. We were involved in testing some of the Racing Brake BBKs in their early days and there were a lot of issues in terms of excessive (and I mean more than pad squeel) from the calipers they produced. Too often companies produce products that are untested in harsh track conditions and I hope this isn't one of them.

-mike aka Paisan

02-15-2010, 12:34 AM	#76 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	I know the brakes need to be re-bled with a power bleeder. there is some air in the lines still and I will have FP take a look at that. I will also take a look at the pads and see if it has to do with the pad wear cause that just showed up in the past two days. BTW it is only on that one rotor the rest have full contact. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-15-2010, 12:45 AM	#78 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	thats probably what it is seeing as I had to drive down some gravel roads the on saturday and it was hell! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-15-2010, 12:54 AM	#80 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	Thanks Mike I will do that __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-15-2010, 01:01 AM	#82 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	lol these stop so hard it would be a weird feeling going backwards! __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-15-2010, 08:55 AM	#83 (permalink)
FuszNissan A True Z Fanatic Join Date: May 2009 Location: St. Louis Posts: 14,275 Drives: Pure Sex Rep Power: 542	__________________ Mods: Too Many to list! LouFuszNissan ZDAYZ 2012

02-15-2010, 12:36 AM	#77 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 534	Cool.. you can check and see if debris has made its way into the pads.. it's possible to get a rock or something lodged in there..

02-15-2010, 12:57 AM	#81 (permalink)
Josh@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Costa Mesa, CA Posts: 1,197 Drives: 2004 G35 Coupe 6MT Rep Power: 534	lol.. may sound dumb.. but a lot of times it works.. Find an empty area.. run the car up in reverse at a good clip and hammer the brakes.. sometimes that's all it needs.. just a different direction to knock it loose. and it's a different sensation.. kinda fun..

02-15-2010, 09:19 AM	#84 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Im wondering is stoping sooo fast a good thing??? At high speeds I know it can cause the car to lose control. __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning)

02-15-2010, 09:36 AM	#85 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	JB its a solid feel when braking with these brakes. The car remains completely stable under heavy braking on my setup. I have done several 60-0 then 70-0 then 80-0 back to back runs so far with no fade and stable braking control throughout the entire series of braking. I am so glad i have a few streets around the office where I can do this After the car gets back from FP I will do the braking tests and give everyone solid numbers to run by. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-15-2010, 09:41 AM	#86 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	when I say back to back I mean 60-0 then floor it till I reach 70 and then brake to 0 then floor it again... I did this process for a few miles to really try and punish these brakes!!! and they just keep taking it. This was also in sub freezing temps and the brakes were quick to stop. After I got off the lonely side street with no traffic I pulled onto the main road and when I pulled into line at the light smoke was coming out of my wheel wells people were looking at me like OMG!!! I just smiled hehehe __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

02-15-2010, 06:39 PM	#87 (permalink)
JB-370z A True Z Fanatic Join Date: Apr 2009 Location: Houston, Tx Posts: 1,859 Drives: Stage 2 Twin Turbos Rep Power: 19	Thanks for helping make my decision bullitt. I ordered them today and it looks like it will be 1-1/2 months before I get them to my house. Not really a big deal because my 19" SSR's have about a month or so left before they get to my house. I opted to get them in a custom poweder coated red. 15" front with 8 pistons and 14" rear with 6 pistons. I went with the drilled and slotted, I know I am going to get $hit from some of yall for going that route. The nice dude named Mike threw in some free stainless steel lines all around too, not sure what kind though! Plus free shipping. After the sale is over these things are going to cost more. Someone want to give me an idea of what brake fluid to use?? I track once a month if that, and I am not a crazy driver on the streets! Does endless make street fluid?? How much does a shop charge to put these on?? __________________ ll Baker Tuning ll GTM ll Powerhouse Amuse ll HKS ll Up-Rev ll iForged ll AP Racing ll Pioneer ll SPL ll Bride ll Top Secret ll OS Giken ll GTM Stage 2 Twin Turboed 370z (First in Texas, Thanks To Baker Tuning) Last edited by JB-370z; 02-15-2010 at 06:46 PM.

02-17-2010, 02:05 AM	#88 (permalink)
1slow370 A True Z Fanatic Join Date: Aug 2009 Location: In the D Posts: 3,732 Drives: v8 74 260z ;) Rep Power: 7251	yeah three short runs like that is nothing hell my akebono's with stock pads and fluid did 5 stops 150-20 and they faded on 4 and were gone after 5 (pads were covered in metal, rotors were HOOTT and scarred to hell). now i have stoptech front rotors(the rears were fine) and hawk pads. Going to be looking at getting some different rotors and picking up some carbotech xp10-xp8 pads for the front-rear, some stainless lines, and some ate superblue fluid.

02-17-2010, 08:26 AM	#89 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3682	slow, I did more than three stops I did like nine... and i didnt even let the brakes cool enough before pounding them hard again. like I said these will be properly tested once I get the car back. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Sport (option) Suspension vs. Nismo suspension	355890	Brakes & Suspension	19	07-19-2022 02:04 PM
oil cooler option?	racerxj17	STILLEN	16	08-31-2009 09:55 PM
19" Nissan/ Alcoa 370Z Option Wheel	Dustin@Z1	Tires/Wheels	5	07-07-2009 03:48 PM
DIY for paint fangs option	simota1	Exterior & Interior	0	07-02-2009 06:10 AM
Rev match Option	igota21incher	Nissan 370Z Pricing / Ordering Discussions	14	12-22-2008 12:54 AM