Tomorrow I will finally be free from my suv

SgtGoldy

Wish me luck in the morning





Ill post pictures. Im only concerned about how to drop it. Not entirely understanding this whole pre-sprung thing and how to keep it like that. I'm going to read and research like a Boss all tonight so tomorrow I'm prepared

__________________

fuct

you adjust height by loosening the retaining nut (bottom gold colored one) and threading the bottom of the shock body up or down. dont mess with the springs or the gold nuts holding it in place.

the pain in the *** is you have to unbolt the bottom of the shock body from the car to adjust height.

Sh0velMan

What he said, don't mess with the other rings, they're for spring pre-load adjustment and unless you know what you're doing, you could make the car ride funky as hell.

Grats on the sweet coils.

__________________
Buy My Car! | Build Thread

rAiN

hows your installation going bro?

Jerggy13

From all the research I have done you do not want to preload your springs at all. Just adjust the top collars to snug and all your height adjustments on the bottom.

BTW... I have the same Habor Freight jack and I love it.

__________________
Changes come. Keep your dignity. Take the high road.
Take it like a man. Momma Sed Like the rain. Like a kidney stone.
Its just a broken heart, son. This pain will pass away.

Zbrah

Good luck man, if i didn't have to work right now I wouldn't mind dropping by to assist. You installing camber kits too?

SgtGoldy

Thanks for the info guys! I was called into work before I even had a chance to get started (They needed some help... on my day off ) so I will try tomorrow.

Camber kit is already installed for both the front and rear so Im good to go on that

__________________

zguynate

You should be able to adjust it without unbolting the bottom. Tighten the two lock rings under the spring together real tight, then use the spanner wrench on the top ring to turn the assembly clockwise and the bottom ring to turn counter clockwise. Thats how I did mine on my 350z and it worked alright.

__________________
2009 370z touring w/sports package

DEpointfive0

__________________
Do YOU want to know what/where I got my username from?

SgtGoldy

So took 2 days... First day I put them on and Second day I lowered... Cause I was lazy as Fuuuucccc*****.

End results are awesome... She needs a wash and I might raise her a bit cause its really low and Im scared I will scrape on everything and anything.





Comparison Picture of before:


and after (Note: This is an old debit card to show the amount of drop I have. It rested on it fine and couldnt fit underneath.)






Actual sexy pics to come later. For now I just have unwashed photos taken on a camera phone

__________________

rAiN

Looks real good!!

SgtGoldy

thanks rAiN!

__________________

Shadezz

Sick made my friend....nice touch!!!

__________________
2012 370Z BLACK EDITION/ FLT BLK Rays / 5% 3M Tint / DW's / Z1 SS & 2 Piece Rotors
Nismo S-Tune OEM / Beluga CBE & Y-PIPE / DDX370 / GTR Start .4 Fluid / NST Blue Kit

Zbrah

Looks more bad *** after the drop! Should give it a few more days till all settles then adjust to your desired height and realignment. Its crazy how much lower you can still go on it. How's she riding compare to the stock spring?

SgtGoldy

Thanks man!

Dude I feel like I could lay frame if I had the time and ability. Way smoother ride right now. The backs are a bit stiffer just to help with any possible rubbing on bumps but the fronts are about 2 clicks softer. I really enjoy it compared to the stock ride. This is my first set of coils so I really couldn't tell you how it compares to others but for me its a different world now.


Yea and I will have to readjust in a bit. I measured them after driving for a bit and they dropped a tad. So I can only assume it will drop a bit more.

__________________