Nismo bumper brake duct install

Osiris · 07-30-2013, 02:42 PM

what do you have the hose attached to at the brake? Is there a bracket you installed? Do you have any pics of that?

LukasC · 07-30-2013, 04:24 PM

Quote:

Originally Posted by osiris

what do you have the hose attached to at the brake? Is there a bracket you installed? Do you have any pics of that?

ImageUploadedByTapatalk1375215856.357120.jpg ImageUploadedByTapatalk1375215874.634572.jpg

Osiris · 07-30-2013, 04:31 PM

ah ok, very nice. Was that purchased from somewhere or did you fab it? If purchased, where at?

Rusty · 07-30-2013, 04:39 PM

Here's mine.

Sh0velMan · 07-30-2013, 04:40 PM

Quote:

Originally Posted by Osiris

ah ok, very nice. Was that purchased from somewhere or did you fab it? If purchased, where at?

Looks like the stillen backing plates.

Wish i could buy just them...

Osiris · 07-30-2013, 04:41 PM

Rusty, is yours the same kit/parts as the OP?

LukasC · 07-30-2013, 05:12 PM

That's the stillen kit. Idk u can always ask them if u can buy just that!

Rusty · 07-31-2013, 06:43 AM

Quote:

Originally Posted by Osiris

Rusty, is yours the same kit/parts as the OP?

Yea, that's the Stillen kit.

takjak2 · 07-31-2013, 05:45 PM

Quote:

Originally Posted by Sh0velMan

Looks like the stillen backing plates.

Wish i could buy just them...

Stillen was a real pain about selling just that portion of the kit to me, but finally did once I got to the right person

gurneyeagle · 07-31-2013, 06:33 PM

Quote:

Originally Posted by DEpointfive0

That made me slightly horny...
And chance a pebble will be thrown up and go as far as to ding the rotor/get caught between the pad?

Quote:

Originally Posted by Dave s

It is always a possibility that a stone could get in but not a huge risk. If you were concerned you could run mesh in the hose as a safety measure.

Installed my Nismo RC ducts last Friday and will be running the hoses from the ducts to the brakes this weekend. I'm inserting a piece of screen (Lowes hardware dept) between the duct outlet and the 4" to 2" reducer to keep debris away from the rotor.

LukasC · 07-31-2013, 11:38 PM

Quote:

Originally Posted by gurneyeagle

Installed my Nismo RC ducts last Friday and will be running the hoses from the ducts to the brakes this weekend. I'm inserting a piece of screen (Lowes hardware dept) between the duct outlet and the 4" to 2" reducer to keep debris away from the rotor.

Pics?

Dave s · 08-04-2013, 11:27 PM

I also used the stillen backing plates to moun the hoes onto at the wheel end.

chops · 08-14-2014, 08:13 PM

Quote:

Originally Posted by takjak2

Stillen was a real pain about selling just that portion of the kit to me, but finally did once I got to the right person

who'd you talk to over there? i want just the backing plates as well

martin82 · 08-14-2014, 08:26 PM

Just drill a 3" hole on the dust shield: http://www.summitracing.com/parts/aa...2160/overview/

it's all you need and a few rivets!!

takjak2 · 08-24-2014, 08:57 PM

Tread back from old'.

@Chops: Kyle sorted everything out for me.

@Martin: We don't really have dust shields from the factory to do that.

07-30-2013, 02:42 PM	#46 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 19	what do you have the hose attached to at the brake? Is there a bracket you installed? Do you have any pics of that? __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

07-30-2013, 04:31 PM	#48 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 19	ah ok, very nice. Was that purchased from somewhere or did you fab it? If purchased, where at? DLo likes this. __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

07-30-2013, 04:41 PM	#51 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 19	Rusty, is yours the same kit/parts as the OP? __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

08-14-2014, 08:26 PM	#59 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	Just drill a 3" hole on the dust shield: http://www.summitracing.com/parts/aa...2160/overview/ it's all you need and a few rivets!! Mandingo likes this.

08-24-2014, 08:57 PM	#60 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 143	Tread back from old'. @Chops: Kyle sorted everything out for me. @Martin: We don't really have dust shields from the factory to do that. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

07-30-2013, 05:12 PM	#52 (permalink)
LukasC Track Member Join Date: Apr 2011 Location: San Antonio, Tx Posts: 664 Drives: 11 Stillen SC Bl M6 Rep Power: 17	That's the stillen kit. Idk u can always ask them if u can buy just that!

08-04-2013, 11:27 PM	#57 (permalink)
Dave s Base Member Join Date: Sep 2012 Location: Australis Posts: 36 Drives: 10 370z red at7 Rep Power: 13	I also used the stillen backing plates to moun the hoes onto at the wheel end.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Brake Cooling Duct Installation	scruffydog	DIY Section (Do-It-Yourself)	31	04-18-2017 05:06 PM
DIY brake cooling duct	joo030879	DIY Section (Do-It-Yourself)	6	01-01-2014 08:55 AM
Brake Cooling Duct Idea - 2013 Front Bumper	Dystopia	Brakes & Suspension	7	10-31-2013 11:54 AM
Pretty cool brake duct setup for rotors (GTR)	SPOHN	Other Vehicles	7	12-26-2012 08:19 PM
Central 20 Brake Duct Kit	SoCal 370Z	Brakes & Suspension	16	05-06-2011 09:07 PM