BRAKE, ABS, VDC OFF, SLIP light on.What do I do?

DJ425 · 06-15-2013, 08:49 AM

Quote:

Originally Posted by MJB

You can't go outside and look real quick? That is a crazy size tire on the rear, you sure thats right? I'm think the diameter differences are causing your traction control to go crazy....

Sorry I was at work when I guessed my sizes. rear is actually 45 and front is 40

.c2 · 06-15-2013, 09:17 AM

I don't know if it helps but when I got my spacers installed they actually ended up torching my studs or something and burnt one of my 'speed sensors'..? That caused all of those lights to go on for me until they replaced it. Of course, I had a CEL as well and they checked it through reading that

Nut_N_Much · 08-04-2013, 01:46 PM

I just swapped out base brakes with Sport Calipers and Spec R springs and the same thing happened to the car when I was done. We topped off the brake fluid the disconnected the (-) terminal on the battery for 45min to reset the ECU. The lights went away, then came back. The car was driven for a wile and the lights went off on there own. I never touched the wheel sensors during my work, I have no idea why the lights came on, I think the ECU just needed time to learn the new setting it is getting from the new input from the sensors.

Now we have the E-Brake light coming on when we shift from 3rd to 4th gear. Crazy Cars these Z's.

Everything in the manuals points to ABS wheel sensors. For the Slippery/VDC dash lights. The tire pressure light probably means they damaged one of your TPS senors when the removed the tires. Most shops can reset the TPS to your car. Dealer charges 25 to 50 to reset them depending on the dealer being a good one or crap.

Not the first Time: E Brake, then VDC & Traction indicator stayed lit after hill SF climb

.

Gorcheck · 12-30-2015, 09:07 AM

I know that it might be a little late on this post but i just experinced the same problem. OEM tire sizes are 245-40R19 in front and 275-35R19 in the back. If you put a taller tire in the back then smaller in the front it will throw these codes. I had 245-40R19 in the front and 275-45R19 in the back and it threw Brake, Abs, VDC and slip. When you first start the car it wont thorw the codes until you drive at a consistent speed and the computer can sense that there is a problem. I put 275-35R19 in the rear and havent had the problem since. it was a costly mistake on my part

06-15-2013, 09:17 AM	#17 (permalink)
.c2 Enthusiast Member Join Date: May 2012 Location: BC Canada Posts: 414 Drives: 09 370z MB 6MT Rep Power: 13	I don't know if it helps but when I got my spacers installed they actually ended up torching my studs or something and burnt one of my 'speed sensors'..? That caused all of those lights to go on for me until they replaced it. Of course, I had a CEL as well and they checked it through reading that Nut_N_Much likes this. __________________ Instagram // Build Thread Amuse / Mines / Bride / Momo / KW / Hotchkis / Motordyne / Invidia / Injen

08-04-2013, 01:46 PM	#18 (permalink)
Nut_N_Much A True Z Fanatic Join Date: Dec 2011 Location: Pensacola Florida Posts: 1,696 Drives: Awesome Car Rep Power: 26	I just swapped out base brakes with Sport Calipers and Spec R springs and the same thing happened to the car when I was done. We topped off the brake fluid the disconnected the (-) terminal on the battery for 45min to reset the ECU. The lights went away, then came back. The car was driven for a wile and the lights went off on there own. I never touched the wheel sensors during my work, I have no idea why the lights came on, I think the ECU just needed time to learn the new setting it is getting from the new input from the sensors. Now we have the E-Brake light coming on when we shift from 3rd to 4th gear. Crazy Cars these Z's. Everything in the manuals points to ABS wheel sensors. For the Slippery/VDC dash lights. The tire pressure light probably means they damaged one of your TPS senors when the removed the tires. Most shops can reset the TPS to your car. Dealer charges 25 to 50 to reset them depending on the dealer being a good one or crap. Not the first Time: E Brake, then VDC & Traction indicator stayed lit after hill SF climb . __________________ Did new cool science stuff to the car !!! http://www.the370z.com/mazoc/99606-z...y-14-17-a.html http://www.the370z.com/diy-section-d...-w-videos.html Last edited by Nut_N_Much; 08-04-2013 at 01:52 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Slip Light on after header install. Help?	chrischhorn	Engine & Drivetrain	2	01-05-2013 03:35 PM
VDC off light / VDC slip light constant on with parking brake light acting slip light	ZeN	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	0	08-27-2012 11:04 AM
BRAKE, ABS, VDC and slip lights on (not low fluid)	Mike	Brakes & Suspension	6	05-31-2012 08:40 PM
VDC and Slip light = less power?	msr1	Engine & Drivetrain	27	03-08-2012 07:56 PM
VDC off, but slip light blinks	Pharmacist	Nissan 370Z General Discussions	30	10-02-2009 08:26 PM

12-30-2015, 09:07 AM	#19 (permalink)
Gorcheck Base Member Join Date: Nov 2015 Location: Buffalo ny Posts: 8 Drives: 10-370z-CS-M6 Rep Power: 10	I know that it might be a little late on this post but i just experinced the same problem. OEM tire sizes are 245-40R19 in front and 275-35R19 in the back. If you put a taller tire in the back then smaller in the front it will throw these codes. I had 245-40R19 in the front and 275-45R19 in the back and it threw Brake, Abs, VDC and slip. When you first start the car it wont thorw the codes until you drive at a consistent speed and the computer can sense that there is a problem. I put 275-35R19 in the rear and havent had the problem since. it was a costly mistake on my part