Wildwood rotors and top hats??

synolimit · 06-02-2013, 01:26 AM

The sport rotors and brakes have been out for a while. Anyone call up wilwood and see what they say will work for our calipers? They have a ton of top hats so I'm sure one will be a replacement fit for the heavy stockers.

Here is their big brake kit so I know the top hat will fit the car, its just will it fit in the stock caliper.

As you can see the hat number is 170-9289 and the rotor is 160-8399 and 160-8398. The total weight would be 20.3lbs vs like 30lbs for the stock I read. Also summit racing by my house has these at $157.95 for the top hat and 263.82 for each replacement rotor. Anyone confirm fitment?

Google turned up $250 a rotor and $153 a top hat.

takjak2 · 06-02-2013, 07:03 PM

in for results

Wonka2581 · 06-02-2013, 07:05 PM

Quote:

Originally Posted by takjak2

in for results

Same here,

MJB · 06-02-2013, 09:43 PM

Why not just get RacingBrake 2-piece rotors? They work with the sport calipers. And only weigh 22lb per rotor compared to the stock 30lbers.

synolimit · 06-02-2013, 11:42 PM

Quote:

Originally Posted by MJB

Why not just get RacingBrake 2-piece rotors? They work with the sport calipers. And only weigh 22lb per rotor compared to the stock 30lbers.

If that's true than they're 1.7 lbs heavier and $113 more expensive. Not a good deal there.

MJB · 06-02-2013, 11:48 PM

Quote:

Originally Posted by synolimit

If that's true than they're 1.7 lbs heavier and $113 more expensive. Not a good deal there.

I don't think they'll fit to be honest... the caliper sits a little different than the sport caliper, so the rotors are designed different than our stock ones. I just put on the front Wilwood BBK this weekend. Granted I did the 13" setup.. had to cut the dust shield completely off because the rotor sits closer to the hub than stock.

Wouldn't hurt to call Wilwood tomorrow.

synolimit · 06-03-2013, 02:48 PM

Quote:

Originally Posted by MJB

I don't think they'll fit to be honest... the caliper sits a little different than the sport caliper, so the rotors are designed different than our stock ones. I just put on the front Wilwood BBK this weekend. Granted I did the 13" setup.. had to cut the dust shield completely off because the rotor sits closer to the hub than stock.

Wouldn't hurt to call Wilwood tomorrow.

No it wouldn't. And they have so many hats I'm sure one fits. Before I call I'm gonna pull the rotor and get every measurement I can to give them a better insight.

fuct · 06-03-2013, 08:08 AM

haha at the title

synolimit · 06-03-2013, 02:49 PM

Quote:

Originally Posted by fuct

haha at the title

Oops. Yaaaa ipad

DR_ · 06-03-2013, 09:27 AM

I have the RA 2-piece which are the lightest of all but I am not convinced saving weight on the front rotors on this car is the best option for heavy brakers like me.

Sh0velMan · 06-03-2013, 09:44 AM

Quote:

Originally Posted by DR_

I have the RA 2-piece which are the lightest of all but I am not convinced saving weight on the front rotors on this car is the best option for heavy brakers like me.

Big advantage in cooling though. Especially with cooling kits, the air can get inside the hub and into the ring from the inside...

You know that, though.

synolimit · 06-03-2013, 02:54 PM

Quote:

Originally Posted by DR_

I have the RA 2-piece which are the lightest of all but I am not convinced saving weight on the front rotors on this car is the best option for heavy brakers like me.

So they're not 22lbs?

DR_ · 06-03-2013, 04:05 PM

Quote:

Originally Posted by synolimit

So they're not 22lbs?

RA are 19 lbs.

Rusty · 06-03-2013, 10:37 PM

I'm a heavy braker too. I'm running the RB 2 piece rotors, Hard Brake Ti heat shields in the front calipers, and the RC brake ducts.

synolimit · 06-03-2013, 10:46 PM

Quote:

Originally Posted by Rusty

I'm a heavy braker too. I'm running the RB 2 piece rotors, Hard Brake Ti heat shields in the front calipers, and the RC brake ducts.

Mind popping that off and putting it on a real scale so we can all see the weight?

06-02-2013, 01:26 AM	#1 (permalink)
synolimit A True Z Fanatic Join Date: May 2013 Location: Columbus, OH Posts: 5,051 Drives: 2013 Silver 370z Rep Power: 3389	Wilwood rotors and top hats?? The sport rotors and brakes have been out for a while. Anyone call up wilwood and see what they say will work for our calipers? They have a ton of top hats so I'm sure one will be a replacement fit for the heavy stockers. Here is their big brake kit so I know the top hat will fit the car, its just will it fit in the stock caliper. As you can see the hat number is 170-9289 and the rotor is 160-8399 and 160-8398. The total weight would be 20.3lbs vs like 30lbs for the stock I read. Also summit racing by my house has these at $157.95 for the top hat and 263.82 for each replacement rotor. Anyone confirm fitment? Google turned up $250 a rotor and $153 a top hat. __________________ 13 370z- Last edited by synolimit; 06-05-2013 at 10:21 AM.

06-02-2013, 07:03 PM	#2 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 143	in for results __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

06-02-2013, 09:43 PM	#4 (permalink)
MJB A True Z Fanatic Join Date: Aug 2011 Location: Tacoma, WA Age: 41 Posts: 1,498 Drives: a POS truck Rep Power: 496	Why not just get RacingBrake 2-piece rotors? They work with the sport calipers. And only weigh 22lb per rotor compared to the stock 30lbers. __________________ 09 Nismo #0483 sold. Viper or C7 next time around.

06-03-2013, 08:08 AM	#8 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	haha at the title Sh0velMan likes this.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Struts, springs, and top hats	ClemsonWill	Wanted	8	11-30-2012 04:00 AM
WTB front suspension top hats.	Daishi9000	Wanted	1	11-05-2012 04:45 PM
Forged Performance hats are IN STOCK!	Sharif@Forged	Automotive Clothing and Apparel	3	02-09-2012 09:38 AM
Nissan Z Hats now available @ Z1 Motorsports	Dustin@Z1	Z1 Motorsports	6	06-28-2010 08:30 PM
Nissan Z Hats now available @ Z1 Motorsports	Dustin@Z1	Sponsor Classifieds	0	10-26-2009 05:34 PM

06-03-2013, 09:27 AM	#10 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 17	I have the RA 2-piece which are the lightest of all but I am not convinced saving weight on the front rotors on this car is the best option for heavy brakers like me.