04-25-2013, 11:55 AM
|
#7 (permalink)
|
|
A True Z Fanatic
Join Date: Jun 2010
Location: Long Island
Posts: 5,059
Drives: slowwww
Rep Power: 29
|
Quote:
Originally Posted by SurfDog
I have an 09 touring sport. (Modded)
My (red)brake,(amber) ABS, (amber)VDC, (amber)TRAC CONTROL
Lights all came on so I concluded (correctly) than by brake fluid is low.
Here is the problem, I put brake fluid in my power steering reservoir (oops!) and drove around a week wondering if it was time for a new master cylinder. (Cause the lights stayed on (doh!).
I know brake fluid is nasty caustic stuff and worry it has damaged my steering mechanisms.
Three questions:
1. Will a steering fluid flush at brakes plus (using valvoline synthetic) sufficiently remove the brake fluid or do I need a more involved process?
2. What damage should I look for?
3. Can you guys please go gently on me for being such a bonehead? (That's more of a request than a question I suppose lol)
4. (Bonus question) What am I forgetting.
Thanks in advance for your input. When I looked over at the HUGE brake fluid label on the cover my heart almost exploded knowing I'd driven a few hundred miles with brake fluid in my steering rack!!!!
|
oh boy.....that's not good. Like you said, brake fluid is very caustic and could eat away the seals. You need to flush everything out ASAP and hope it didn't already do damage. It's kind of hard to really tell how much damage it caused until something fails. At least it wasn't ALL brake fluid in there. It doesn't sound like you had to add much fluid, so I'm assuming some of it has been diluted by the original power steering fluid. Definitely have it flushed sooner rather than later.
__________________
[09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R]
|
|
|
Similar Threads
9Likes
Threaded Mode
