Snapped Spacer Lug
 

Hey everyone I need some help. Today I installed my SPC Camber Links and Upper Control arms. After finishing the install I torqued my lugs to ~80-83 lbs when one of my lug nuts snapped off.

The lug snapped from my ichiba 25mm wheel adapter spacers and so I'm wondering is there a way to replace the lug on the adapter alone? Or do I have to buy a whole new set? :shakes head:
https://mail-attachment.googleuserco...WhSdK-7W7YWyaE
https://mail-attachment.googleuserco...hfKOKBZFP3_iqc

If you aren't running stud replacement spacers, nows the time to swap. I recommend H&R DSR spacers. Stillen has them on sale all the time.

They only go to 20
I run 25mm on the back so I can only get adapters for that size no stud replacements. Now I'm just wondering if it's possible to do a stud replacement on the adapter itself

Yes you can change the stud on it. You'll have to bang it out and install a new one from the back. Thats pretty much it.

Would you happen to know where I could find one?
I've found stud replacements for 10 and 20 mm but not 25, and found these ones:
ARP Extended Wheel Studs

Are your Ichiba spacers bolt on ones? If so, you wouldn't need an extended stud.

yeah they're 25mm bolt on adapters, so would just a 25mm stud fit?

I don't know the size off hand. Best bet is to measure what the other ones are and go with that.

Alright thanks for your help

Problem solved
 

So I ended up just getting a replacement stud for the 370Z and used my hydraulic press to obviously press it into the open slot and :tup:
Problem Solved
https://mail-attachment.googleuserco...sb9yZvXgLzZ1J0
https://mail-attachment.googleuserco...AXGuzBdOzFMQaY
:happydance::driving::happydance: