Brake Pad Change

jkim23 · 02-25-2013, 04:35 PM

Has anyone here in SoCal performed a brake pad/fluid change? I already did a search and didn't find anything helpful. I'm interested in learning how to do this procedure on my Z. Thanks!

Cmike2780 · 02-25-2013, 04:40 PM

Pad's are supper easy to replace. If you know how to replace pads on caliper type brakes, it's the same exact thing as you would on other cars. You can get aways with removing a single bold and swinging the caliper in place. The pads drop right in. Usually just need a few simple hand tools and a clamp to compress the piston. The fluid is a bit tricky, but buying a brake bleeder will make it much easier.

diddy535 · 02-25-2013, 05:28 PM

REQUEST:Changing front and rear brake pads on stock akebono

Some info here on pad replacement, links to a DIY on it. Also some info on brake bleeding which is in there as well.

jkim23 · 02-25-2013, 08:49 PM

I've never done a brake pad change before so I have no prior experience.

I already read that forum posting; I was hoping for something a little more detailed and ideally with some pictures.

It seems that the Sport package brakes are also a little different than stock. Also one of the links that someone posted no longer works. I would hate to start the procedure and then get stuck.

SE5spd · 02-26-2013, 10:02 AM

Are you the black 370z that was buttonwillow 2 Sundays ago with XS?

Cmike2780 · 02-26-2013, 10:52 AM

Quote:

Originally Posted by jkim23

I've never done a brake pad change before so I have no prior experience.

I already read that forum posting; I was hoping for something a little more detailed and ideally with some pictures.

It seems that the Sport package brakes are also a little different than stock. Also one of the links that someone posted no longer works. I would hate to start the procedure and then get stuck.

This is the DIY for a rotor replacement to give you an idea of what's going on under there.

Plenty of videos on YouTube for general brake pad replacement. The one's on the Z with Sports Package are the same concept, but I believe the pads are held in w/ pins. Others will have to verify, but you may not even need to compress the piston(s) in the calipers. I'm assuming you still do however so the new pads can fit. AutoZone has brake repair tools you can borrow or you can just use some c-Clamps with some padding so you don't mess up the finish.

Quote:

Originally Posted by Mike

I'll see if I can write it clearly here.

There are 2 pins that go across the top of the caliper and hold the brake pads in place. Those pins are secured themselves with cotter pins.

Remove the cotter pins and with a small punch, drive the pins out of the calipers.

Once the pins are removed, pull the pads out of the top.

Use a couple of flat blade screwdrivers to push the pistons back into the calipers to make room for the new, thicker pads.

Transfer the shims from the old pads to new ones, and reinsert the pads in the calipers.

Replace the pins and cotter pins and you are done.

As with anything, if you've never done this sort of thing before & unsure of your skills, save yourself the trouble and let a pro handle it. Ask if you can watch while they install the pads and learn from it. The brakes are undoubtfully one of the most important aspect of your car in terms of safety. It's an easy job, but there isn't really any room for error.

diddy535 · 02-26-2013, 10:57 AM

Yeah I agree, if its this much trouble you're better off having someone else do it or at least get someone experienced to help you do it yourself for the first time.

jkim23 · 02-27-2013, 05:54 PM

Quote:

Originally Posted by SE5spd

Are you the black 370z that was buttonwillow 2 Sundays ago with XS?

Yup that's me.

Yeah, I think I'll try to either have someone help or go to a shop and hopefully the guy will let me watch. Thanks for the responses.

martin82 · 02-27-2013, 08:26 PM

jkim23, I am the one with the black one, spoke to you about the brake pads..... don't pay. They are very simple to do........

jkim23 · 02-27-2013, 08:41 PM

Quote:

Originally Posted by martin82

jkim23, I am the one with the black one, spoke to you about the brake pads..... don't pay. They are very simple to do........

hey martin! your Z sounds great on the track.

yes, I've been searching and I found some articles and saw some videos that people posted on other cars. hopefully I can find someone to help me out with the first pad and fluid change.

martin82 · 02-27-2013, 08:52 PM

it's very easy, no need to pay anyone! if you get stuck anywhere let me know!

SE5spd · 02-27-2013, 09:54 PM

If you were in West LA or anywhere near id show you how to do it but OC is a bit far. Just like anything else with cars, do it once to learn how to do it, trial and error.

martin82 · 02-27-2013, 10:48 PM

we can even do it at the track pretty fast...

SE5spd · 02-28-2013, 12:31 AM

Quote:

Originally Posted by martin82

we can even do it at the track pretty fast...

True. There super easy. What pads did you end up getting anyways?

jkim23 · 02-28-2013, 02:20 AM

Quote:

Originally Posted by SE5spd

True. There super easy. What pads did you end up getting anyways?

StopTech Street Performance. Seemed like a good blend of street/track.

If I came up to West LA, would you help me install the pads and change fluid?

02-25-2013, 04:35 PM	#1 (permalink)
jkim23 Base Member Join Date: Jun 2012 Location: orange county ca Posts: 57 Drives: 2012 370z Rep Power: 13	Brake Pad Change Has anyone here in SoCal performed a brake pad/fluid change? I already did a search and didn't find anything helpful. I'm interested in learning how to do this procedure on my Z. Thanks!

02-25-2013, 04:40 PM	#2 (permalink)
Cmike2780 A True Z Fanatic Join Date: Jun 2010 Location: Long Island Posts: 5,059 Drives: slowwww Rep Power: 29	Pad's are supper easy to replace. If you know how to replace pads on caliper type brakes, it's the same exact thing as you would on other cars. You can get aways with removing a single bold and swinging the caliper in place. The pads drop right in. Usually just need a few simple hand tools and a clamp to compress the piston. The fluid is a bit tricky, but buying a brake bleeder will make it much easier. __________________ [09][MB][6-Spd MT][Touring][Stillen Gen III][K&N][Borla CBE][Evo-R] [ArchitTEK Photography]

02-25-2013, 05:28 PM	#3 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 15	REQUEST:Changing front and rear brake pads on stock akebono Some info here on pad replacement, links to a DIY on it. Also some info on brake bleeding which is in there as well. martin82 and Swindler like this. __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html

02-26-2013, 10:02 AM	#5 (permalink)
SE5spd Enthusiast Member Join Date: Aug 2012 Location: Los Angeles Posts: 276 Drives: Z33 Rep Power: 13	Are you the black 370z that was buttonwillow 2 Sundays ago with XS? __________________ http://www.youtube.com/zndhnm

02-26-2013, 10:57 AM	#7 (permalink)
diddy535 Track Member Join Date: Feb 2012 Location: St. Louis, MO Posts: 789 Drives: '09 370Z RAE 6MT Rep Power: 15	Yeah I agree, if its this much trouble you're better off having someone else do it or at least get someone experienced to help you do it yourself for the first time. Trips likes this. __________________ ( Click to show/hide ) http://www.the370z.com/members-370z-...ys-thread.html

02-25-2013, 08:49 PM	#4 (permalink)
jkim23 Base Member Join Date: Jun 2012 Location: orange county ca Posts: 57 Drives: 2012 370z Rep Power: 13	I've never done a brake pad change before so I have no prior experience. I already read that forum posting; I was hoping for something a little more detailed and ideally with some pictures. It seems that the Sport package brakes are also a little different than stock. Also one of the links that someone posted no longer works. I would hate to start the procedure and then get stuck.

02-27-2013, 08:26 PM	#9 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	jkim23, I am the one with the black one, spoke to you about the brake pads..... don't pay. They are very simple to do........

02-27-2013, 08:52 PM	#11 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	it's very easy, no need to pay anyone! if you get stuck anywhere let me know! Cmike2780 likes this.

02-27-2013, 09:54 PM	#12 (permalink)
SE5spd Enthusiast Member Join Date: Aug 2012 Location: Los Angeles Posts: 276 Drives: Z33 Rep Power: 13	If you were in West LA or anywhere near id show you how to do it but OC is a bit far. Just like anything else with cars, do it once to learn how to do it, trial and error. __________________ http://www.youtube.com/zndhnm

02-27-2013, 10:48 PM	#13 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 20	we can even do it at the track pretty fast...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Brake/Throttle Interlock disable - Left Foot Brake enable	///MSH	Track / Autocross / Drifting / Dragstrip	1	08-15-2013 10:31 AM
Brake Pad and Fluid Change	jkim23	DIY Section (Do-It-Yourself)	3	02-27-2013 05:19 AM
Brake Change Time	nynhex	Brakes & Suspension	43	08-15-2012 03:18 PM
15K brake fluid change???	Jordo!	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	4	02-06-2012 06:54 PM
Quick HELP! Brake Pad Change	spearfish25	Brakes & Suspension	6	03-27-2010 06:45 PM