20" and H&R Springs

Wiggins3377 · 01-09-2013, 08:37 PM

Anyone out there with 20" wheels lowered on H&R springs? I'd love to here your reviews and see some pics! Mostly wondering if you have any rubbing issues, what offsets you're running and if you're able to return the car back to stock camber.

CC QUIK · 01-09-2013, 11:09 PM

kinda depends on the drop, and H&R are an agressive drop.Running H&R and hankooks 275/35/19 fronts and 295/35/19 rears with no rubbing but its close. A wider tire with 20s and spacers might not clear.

Wiggins3377 · 01-09-2013, 11:20 PM

I'm on H&Rs now. I had 19" all summer just wondering if I can make 20" work.

Sent from my iPhone using Tapatalk

CC QUIK · 01-10-2013, 12:07 AM

when i was considering 20s. i called H&R to get some insight but they were a little vague telling me about tire size and measurements i needed to take. hope someone chimes in with that set up.

Unique_Z · 01-10-2013, 07:32 PM

Check out my setup, it's in my journal

Wiggins3377 · 01-14-2013, 01:54 PM

Quote:

Originally Posted by Iwan72

Check out my setup, it's in my journal

Camber and offset specs?

Sent from my iPhone using Tapatalk

EVOHUNTER · 01-25-2013, 05:30 PM

Im running 20x11.5 - 305/25R20 and 20x9.5 -255/30R20
Front is +22 and rear is +16, they fit flush. h&r springs, i cut off a half inch off the back spring mount, made the car more level.
at this time i hadnt modded the rear spring mount, i found the rear to sit a little to high.

raymondo510 · 01-25-2013, 10:43 PM

Very nive evohunter

EVOHUNTER · 01-26-2013, 09:54 AM

Thank You Sir.

Wiggins3377 · 01-26-2013, 10:54 AM

Quote:

Originally Posted by raymondo510

Very nive evohunter

Second that. I think you just helped me make my decision on 20". You think i would have any rubbing issues with 20x9.5 +15 / 20x10.5 +10 and 255/30 and 295/25 tires?

EVOHUNTER · 01-26-2013, 11:11 AM

You wont rub at all, My front wheel could use about 4-5 mm more, so +15 would be dead on, atleast i think. For the rears +10 would be just about be spot on!
I have no rubing what so ever, My camber is -2.5 in the rear and -2.3 right Front and-1.9 left front, I was able to adjust it to -2.5 in the rear with the stock camber arms and i got my toe dead on aswell!
The front wasnt touched, as i dont have adjsutable upper control arms.
Wiggins, Go 305/25R20 in the rear. If i was gonna do it all over again, i woulda went 275/30r20 in the front to keep it closer to stock stagger, but not sure how itll fit.
but go 30525r20, Little wider in the rear and itll look better.

Wiggins3377 · 01-26-2013, 11:51 AM

Quote:

Originally Posted by EVOHUNTER

You wont rub at all, My front wheel could use about 4-5 mm more, so +15 would be dead on, atleast i think. For the rears +10 would be just about be spot on!
I have no rubing what so ever, My camber is -2.5 in the rear and -2.3 right Front and-1.9 left front, I was able to adjust it to -2.5 in the rear with the stock camber arms and i got my toe dead on aswell!
The front wasnt touched, as i dont have adjsutable upper control arms.
Wiggins, Go 305/25R20 in the rear. If i was gonna do it all over again, i woulda went 275/30r20 in the front to keep it closer to stock stagger, but not sure how itll fit.
but go 30525r20, Little wider in the rear and itll look better.

Thanks for the info man! You've really helped me out. I've added to rep for ya. I'll post some pictures in a few months once I get me new wheels installed. If you get a chance to take some pictures anytime soon with the adjusted rear suspension it would be appreciated, this may be a spring project for me.

EVOHUNTER · 01-26-2013, 02:10 PM

Not a probelm bud!
As for more pictures, my cars in storage until april/may we have about 3 feet of snow lol and its -30 Degrees here.
she doesnt like this weather much lol!
But as soon as i pull her out (looking forward to that) i can get you some pictures!

Wiggins3377 · 01-28-2013, 08:26 PM

what if i went 305/30/20 in the back... think i would have any issues?

EVOHUNTER · 01-29-2013, 11:48 AM

Well you could, but then the front would be a 35/r20, with the h&r's you dont have room for the 255/35r20. atleast on my car i know the 35 series wouldnt work well.
and i wouldnt run 255/30r20 and 305/30r20, ur Overall Dia. is gonna be off.

01-09-2013, 08:37 PM	#1 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	20" and H&R Springs Anyone out there with 20" wheels lowered on H&R springs? I'd love to here your reviews and see some pics! Mostly wondering if you have any rubbing issues, what offsets you're running and if you're able to return the car back to stock camber. __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

01-09-2013, 11:20 PM	#3 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	I'm on H&Rs now. I had 19" all summer just wondering if I can make 20" work. Sent from my iPhone using Tapatalk __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

01-10-2013, 07:32 PM	#5 (permalink)
Unique_Z A True Z Fanatic Join Date: Dec 2010 Location: Brunei Posts: 1,515 Drives: 370Z, 180SX Rep Power: 17	Check out my setup, it's in my journal __________________ My Z Build UniqueZ

01-25-2013, 05:30 PM	#7 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Im running 20x11.5 - 305/25R20 and 20x9.5 -255/30R20 Front is +22 and rear is +16, they fit flush. h&r springs, i cut off a half inch off the back spring mount, made the car more level. at this time i hadnt modded the rear spring mount, i found the rear to sit a little to high. cincySE_Ryan, ts-c63, Bigviet23 and 2 others like this. __________________ Last edited by EVOHUNTER; 01-25-2013 at 10:49 PM.

01-25-2013, 10:43 PM	#8 (permalink)
raymondo510 Track Member Join Date: Mar 2012 Location: NORCAL Posts: 823 Drives: Like I stole It Rep Power: 14	Very nive evohunter ZSeventyThree likes this. __________________ If you ain't first...you're last! -RICKY BOBBY

01-09-2013, 11:09 PM	#2 (permalink)
CC QUIK Base Member Join Date: Sep 2012 Location: Vegas Posts: 83 Drives: 2012 370Z Rep Power: 13	kinda depends on the drop, and H&R are an agressive drop.Running H&R and hankooks 275/35/19 fronts and 295/35/19 rears with no rubbing but its close. A wider tire with 20s and spacers might not clear.

01-10-2013, 12:07 AM	#4 (permalink)
CC QUIK Base Member Join Date: Sep 2012 Location: Vegas Posts: 83 Drives: 2012 370Z Rep Power: 13	when i was considering 20s. i called H&R to get some insight but they were a little vague telling me about tire size and measurements i needed to take. hope someone chimes in with that set up.

01-26-2013, 09:54 AM	#9 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Thank You Sir. __________________

01-26-2013, 11:11 AM	#11 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	You wont rub at all, My front wheel could use about 4-5 mm more, so +15 would be dead on, atleast i think. For the rears +10 would be just about be spot on! I have no rubing what so ever, My camber is -2.5 in the rear and -2.3 right Front and-1.9 left front, I was able to adjust it to -2.5 in the rear with the stock camber arms and i got my toe dead on aswell! The front wasnt touched, as i dont have adjsutable upper control arms. Wiggins, Go 305/25R20 in the rear. If i was gonna do it all over again, i woulda went 275/30r20 in the front to keep it closer to stock stagger, but not sure how itll fit. but go 30525r20, Little wider in the rear and itll look better. __________________

01-26-2013, 02:10 PM	#13 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Not a probelm bud! As for more pictures, my cars in storage until april/may we have about 3 feet of snow lol and its -30 Degrees here. she doesnt like this weather much lol! But as soon as i pull her out (looking forward to that) i can get you some pictures! faya likes this. __________________

01-28-2013, 08:26 PM	#14 (permalink)
Wiggins3377 A True Z Fanatic Join Date: Jul 2011 Location: Cincinnati Posts: 3,236 Drives: 40th 370 Rep Power: 77	what if i went 305/30/20 in the back... think i would have any issues? __________________ AccuAir/ AirRex/ Amuse/ Bride Japan/ Carbon Fiber Element/ Carbon Signal/ Evo-R/ NRG/ Project Kics/ Samco/ Shine Auto/ SPC/ SPL/ Stance/ Stillen/ Takata/ Top Secret/ Work

01-29-2013, 11:48 AM	#15 (permalink)
EVOHUNTER Track Member Join Date: Jul 2011 Location: Edmonton, Canada Posts: 681 Drives: BOOSTED3-7-0 Rep Power: 15	Well you could, but then the front would be a 35/r20, with the h&r's you dont have room for the 255/35r20. atleast on my car i know the 35 series wouldnt work well. and i wouldnt run 255/30r20 and 305/30r20, ur Overall Dia. is gonna be off. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
H&R Sport Lowering Springs \| 1.3"F/1.0R" \| FEEE S&H!!	AJ@ECSMotorsports	Suspension/Brakes	42	03-10-2014 12:29 PM
Base 18" w/springs/coilovers	NickTurnon	Brakes & Suspension	33	05-24-2013 10:52 AM
Eibach springs and the stock "sport lip"	PharmDZ	Brakes & Suspension	9	11-30-2012 05:55 PM
[FOR SALE] Nismo shocks w. springs and Eibach springs	WWJD	Parts for sale (Private Classifieds)	19	03-20-2012 09:33 AM
Springs "destroying" shocks?	Amuse370z	Brakes & Suspension	46	07-08-2011 11:55 PM