AMS Front Camber Adjustable Arms

SPOHN · 02-15-2013, 07:04 PM

Quote:

Originally Posted by corner3garage

I have just spoke to SPL parts and they said that they are working on revisions before a production run that will be very soon!

They told me the same thing in Dec.

Juice14 · 02-16-2013, 07:14 PM

Ok so I didt know it was going to be so hard to decide which arms to get. I guess is between Kinetix and SPC for me.
Nobody has mentioend Eibach...

What should I get then?

roy'sz · 02-16-2013, 07:51 PM

I got the Kinetix. Piece of advice for you.....before final assy, get yourself a grease gun with some mobil1 chassis lube and lubricate the upper ball joint(mine had a small popping sound on them due to being slightly dry and it reoccured after 10k miles. I didn't buy the greasegun and lube the ball joints myself until recently). From assy they are a little on the dry side. But I have had mine for 25k and LOVE them! My car has kept the same camber angle.

Baer383 · 02-17-2013, 12:23 AM

Or you can make your own.

My camber or caster CAN'T change!!!!

SPOHN · 02-17-2013, 12:50 AM

^ amen!!

Juice14 · 02-17-2013, 01:14 AM

JEJE i dont think I can make my own. Ill keep looking into it, Im almost set on SPC just because so many bad reviews about kinetix, your review is the only decent one, I dont have a problem with haginv to grease them up but its disapoingint, or makes you think they didnt take the time to develop ot right or nt enough quality control. Anyways thanks for the reply Ill be cautios in case I get Kinetix.

Do they both have the same issue? do they both have problems as far as loosing the alignment?

thanks

02-16-2013, 07:51 PM	#63 (permalink)
roy'sz A True Z Fanatic Join Date: Aug 2011 Location: palmdale, ca Posts: 1,299 Drives: 2010 nissan 370z Rep Power: 16	I got the Kinetix. Piece of advice for you.....before final assy, get yourself a grease gun with some mobil1 chassis lube and lubricate the upper ball joint(mine had a small popping sound on them due to being slightly dry and it reoccured after 10k miles. I didn't buy the greasegun and lube the ball joints myself until recently). From assy they are a little on the dry side. But I have had mine for 25k and LOVE them! My car has kept the same camber angle. __________________ https://www.youtube.com/watch?v=RtvG...data_playerARK HFC'S-ARK Grip-Stillen G3-M370-UPREV-Kinetix upper control arm-WC Latheworks-Stage2 Bad@$$ Driver(318whp/268tq)-

02-17-2013, 12:23 AM	#64 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Or you can make your own. My camber or caster CAN'T change!!!! SPOHN likes this. __________________ 2013 ZL1 754 rwhp 747 rwtq

02-17-2013, 12:50 AM	#65 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	^ amen!! __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Old 350EVO Camber Adjustable Front Control A-Arm	G Fo12ce	Brakes & Suspension	17	05-24-2012 04:06 PM
[FOR SALE] OEM front camber arms	Rsdntevl	Parts for sale (Private Classifieds)	4	04-29-2012 08:33 PM
WTB: FRONT and REAR adjustable Camber Arms.	TMAN1985	Wanted	7	10-29-2011 06:10 PM
SLP adjustable FRONT camber arms FYI	gozfast	Brakes & Suspension	33	09-28-2011 08:01 PM
Fs: Tein monoflex coilovers & spc front adjustable arms	1fast350z	Northern California Region	9	12-17-2010 05:12 PM

02-16-2013, 07:14 PM	#62 (permalink)
Juice14 Base Member Join Date: Nov 2011 Location: International Posts: 132 Drives: Red 370Z Rep Power: 14	Ok so I didt know it was going to be so hard to decide which arms to get. I guess is between Kinetix and SPC for me. Nobody has mentioend Eibach... What should I get then?

02-17-2013, 01:14 AM	#66 (permalink)
Juice14 Base Member Join Date: Nov 2011 Location: International Posts: 132 Drives: Red 370Z Rep Power: 14	JEJE i dont think I can make my own. Ill keep looking into it, Im almost set on SPC just because so many bad reviews about kinetix, your review is the only decent one, I dont have a problem with haginv to grease them up but its disapoingint, or makes you think they didnt take the time to develop ot right or nt enough quality control. Anyways thanks for the reply Ill be cautios in case I get Kinetix. Do they both have the same issue? do they both have problems as far as loosing the alignment? thanks