alignment results after eibachs

Mike

I didn't use any camber arms or anything, just the springs.

I would post the alignment sheet, but they had to enter it into the computer as a 350Z, so it looks like everything is out of whack. I did give them the suspension specs I found here, and they were able to get everything into spec with the exception of rear camber.

Rear camber should be -1.17 to -2.16 and mine is -2.4 on the left and -1.9 on the right. Not too bad, and it should do without further adjustments, as all of the cross camber and cross caster, etc is all balanced out.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968