Making Nismo ducts

gurneyeagle · 08-01-2013, 08:57 AM

Quote:

Originally Posted by DLo

This is the same pic posted earlier in this thread. I am going to attempt this on my Nismo.

I decided to go with the revotec 4" (102mm) circular air inlets connecting to the Stillen brake cooling kit. I'll obviously need a 4 to 2 reducer as well. The inlets were about $50 and the Stillen kit is approx $235. I'll let you know how it goes.

Revotec Air Inlets: Revotec Automotive Cooling Specialists

Here are the reducers Rusty and I used:

http://www.amazon.com/Woodstock-D425...4+to+2+reducer

Quote:

Originally Posted by Rusty

When I did my brake ducts. This was my second idea I had in mind.

Still a big fan of what you did Rusty (I'm not too prejudice!

)

Quote:

Originally Posted by DLo

^ Your vents came out excellent and you seem to know what you're doing. I'm not as capable so I figure just drilling circles will be much easier for me. Then I'll connect the ducting to the inlets and have a performance shop in SoCal install the rest of the kit along with Hawk HP+ pads and SS lines. That's the plan at least...

Whether you go with Nismo RC ducts or the circular ones it will work out great.

Don't shy away from the Nismo RC ducts just because you are concerned about cutting the holes. I just did mine following Rusty's DIY thread and had no problems whatsoever. In fact, the actual cutting of the bumper was the easiest part.

And just an FYI - Doran Racing sells both the ducts and the RC grille if you are interested. That's where I got my ducts and grille. Nissan has yet to reply to one of my numerous e mails requesting info on how to order. I should have asked the nismo guys when they were at Circuit of the Americas last month.

DLo · 08-02-2013, 01:12 AM

^ Thanks for the info. I ordered the reducers just now. Thanks for the link. I'm sticking with the circular inlets since I already ordered them. I'll try and document as I go. Won't actually get to the install for another couple weeks... I'm shooting for an Aug.24th track date!

DLo · 08-14-2013, 11:11 PM

I received the Revotec circular 102mm (~4") air inlets and the 4"-2" reducers. I already have the Stillen brake cooling kit and will be installing everything next week. I will take plenty of pics. Wish me luck!

Rusty · 08-14-2013, 11:17 PM

Can't wait to see what it looks like.

I would do the right side first because of the washer bottle. This way, any adjustments you make in location of the duct. You can make the other side look the same.

DLo · 08-14-2013, 11:37 PM

^ Good recommendation. I will do that.

DLo · 08-28-2013, 11:38 PM

OK, I'm done with the install. Here is the thread. Enjoy:

NISMO Circular Brake Ducts Using Revotec Inlets & Stillen Brake Cooling Kit

08-02-2013, 01:12 AM	#137 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	^ Thanks for the info. I ordered the reducers just now. Thanks for the link. I'm sticking with the circular inlets since I already ordered them. I'll try and document as I go. Won't actually get to the install for another couple weeks... I'm shooting for an Aug.24th track date! gurneyeagle and Rusty like this. __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

08-14-2013, 11:11 PM	#138 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	I received the Revotec circular 102mm (~4") air inlets and the 4"-2" reducers. I already have the Stillen brake cooling kit and will be installing everything next week. I will take plenty of pics. Wish me luck! __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

08-14-2013, 11:17 PM	#139 (permalink)
Rusty Ronin Samurai - Assassin Join Date: Dec 2011 Location: Fayettenam,Pennsyltucky Age: 68 Posts: 35,186 Drives: 2011 Nismo GM 6M Rep Power: 2684437	Can't wait to see what it looks like. I would do the right side first because of the washer bottle. This way, any adjustments you make in location of the duct. You can make the other side look the same. __________________ 浪人 - 殺し屋 "The Difficult Anytime, The Impossible By Appointment Only" http://www.the370z.com/members-370z-...o-journal.html

08-14-2013, 11:37 PM	#140 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	^ Good recommendation. I will do that. __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

08-28-2013, 11:38 PM	#141 (permalink)
DLo Base Member Join Date: Jul 2012 Location: SoCal - South Bay Posts: 244 Drives: 2012 370Z NISMO GM Rep Power: 13	OK, I'm done with the install. Here is the thread. Enjoy: NISMO Circular Brake Ducts Using Revotec Inlets & Stillen Brake Cooling Kit __________________ 2012 NISMO #294 Gunmetal Metallic - Stock

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
air ducts???	kdo2milger	ConceptZperformance	8	03-28-2012 12:53 AM
FYI on DIY Brake Ducts	ResIpsa	Track / Autocross / Drifting / Dragstrip	4	02-16-2012 12:01 AM
Making a Nismo a Track Beast	NissanUSA	Track / Autocross / Drifting / Dragstrip	74	01-07-2012 12:51 PM
Ducts?	bigrob126	Nissan 370Z General Discussions	5	02-07-2011 06:53 PM
Nismo making a new Carbon LSD	StealthZ	Engine & Drivetrain	6	07-03-2010 03:03 PM