How many quart of brake fluid?

Baer383 · 05-27-2012, 02:01 PM

Quote:

Originally Posted by harman.khinda

$60 is expensive? for something you will use again and again? ^ you got a GTM supercharger. lol.

I really hope you guys don't work on cars for a living.

MattP725 · 05-27-2012, 04:51 PM

Quote:

Originally Posted by Baer383

I have sport brake so as far as the bleeder screw ther is probably 1.

When gravity bleeding just "don't let the m/c run dry" just open all bleeders let them drain into a pan or bucket then keep a eye on the m/c top it off often during the bleed when you have gone thru most of the quart tighten all bleeders top off m/c and I hose off the brake fluid off the calipers just to clean them off.

See my post... there are two... inner and outer.

I personally have never heard of anyone just opening bleeders and wouldn't really trust this system especially since each caliper has two sets of lines going to it (you'll never get all the old fluid out as it would gravitate to one side of the caliper). Also think of it like a water cooler... when you let water out of the bottom of the tank, air replaces it through the drain spout. I guarantee you are letting air in through the bleeders as the fluid drains.

Why shortcut something as important as your brakes when you can bleed them as directed? I have a vaccuum pump from harbor freight that connects to my air compressor. Cost $20-25 and swaps all my fluid in minutes.

Just my 2 cents.

Baer383 · 05-27-2012, 05:10 PM

Quote:

Originally Posted by Baer383

I really hope you guys don't work on cars for a living.

Your post is why I make comment like this.

cossie1600 · 05-27-2012, 07:14 PM

Whatever floats your boat, I would like to be able to trust my brakes when I hit it. The 13psi you can put at the MC should be enough to push the ABS valves open.

Baer383 · 05-27-2012, 07:23 PM

Quote:

Originally Posted by cossie1600

Whatever floats your boat, I would like to be able to trust my brakes when I hit it. The 13psi you can put at the MC should be enough to push the ABS valves open.

It's not consult your dealer for more info.

cossie1600 · 05-27-2012, 07:27 PM

My car is surviving track use okay wo their help, thanks for checking in.

Half *** lazy job is one of the reason why I dont use them for service. They get paid doesn't make them good.

SPOHN · 05-27-2012, 10:04 PM

Quote:

Originally Posted by harman.khinda

$60 is expensive? for something you will use again and again? ^ you got a GTM supercharger. lol.

Hey. I don't like to spend $10 on a hamburger either.

pen · 05-27-2012, 10:09 PM

Quote:

Originally Posted by MattP725

I personally have never heard of anyone just opening bleeders and wouldn't really trust this system

Actually, gravity bleed is more common and effective than most people think. I'd never heard of it either until I started hanging out with racers. Most prefer gravity bleed over vacuum or pressurized methods.

Baer383 · 05-27-2012, 10:14 PM

Quote:

Originally Posted by pen

Actually, gravity bleed is more common and effective than most people think. I'd never heard of it either until I started hanging out with racers. Most prefer gravity bleed over vacuum or pressurized methods.

You know I read this somewhere in this thread but I'm not sure where.

Pen thanks for your comment.

SPOHN · 05-27-2012, 10:16 PM

I gravity bleed and have never had issues. It's no different than any other method used. Just slower. Some of use guys need to think simple logic.

05-27-2012, 10:16 PM	#25 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I gravity bleed and have never had issues. It's no different than any other method used. Just slower. Some of use guys need to think simple logic. TreeSemdyZee likes this. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
brake fluid recommendations	tru_Asiatik	Brakes & Suspension	199	04-09-2021 11:14 AM
Brake Fluid	JSBZ	Brakes & Suspension	10	08-05-2014 10:17 AM
15K brake fluid change???	Jordo!	Nissan 370Z Warranty / Scheduled Maintenance / Servicing / Repairs	4	02-06-2012 07:54 PM
Replacing Brake Fluid	fjpthree	Brakes & Suspension	7	07-12-2011 08:22 PM

05-27-2012, 07:14 PM	#19 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	Whatever floats your boat, I would like to be able to trust my brakes when I hit it. The 13psi you can put at the MC should be enough to push the ABS valves open.

05-27-2012, 07:27 PM	#21 (permalink)
cossie1600 A True Z Fanatic Join Date: Jun 2009 Location: californee way Posts: 5,380 Drives: 370, Leaf Rep Power: 30	My car is surviving track use okay wo their help, thanks for checking in. Half *** lazy job is one of the reason why I dont use them for service. They get paid doesn't make them good.