Doran Racing NISMO RC suspension parts

gomer_110

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock

Shamu

Lol! One set not ever installed on a street car. Let us know how they work out later this year. They look pretty

I tend to stick to parts most resellers carry. Specialized stuff tends to be a pain especially low volume parts like these arms. When I had little run in with curb I had replacement arm from SPC next day.

__________________
Grant

Mike

good point there Shamu. When I had a little run-in with curbing at Carolina Motorsports park, I was able to replace my rear spc piece that bent quickly too. Never thought about the possibility of a mishap with these.

__________________
NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z
Porsche: 93 968 / 23 Macan GTS / 93 968

HKYStormFront

while that is a very valid point, watch this starting at the 17min mark:

Mike Skeen: 2012 Nissan 370Z Watkins Glen - YouTube

i saw the front PS arm when Dustin and I visited the Doran shop. it just had a small nick in the finish. simply amazing for such a hard hit that actually warped the car itself.

__________________
Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs
09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

Dwnshift

Im too tired to find the guy with the rolling eyes so......
Rolling my eyes
I encourage him to provide any feed back good or bad to make our product better.
The products that we produce are intended for the track and have survived the full contact realm of real world racing in the Conti series.
If you are not seriously tracking your car....Im gonna go out on a limb and say our products are most likely not for you.
We are not a mass production parts company....but I can tell you the parts that come out of the shop are superior quality and true race spec parts.
As I type this right now there are more than a couple GT cars as well as DPs that are currently lapping under the lights ...full bore ..here at Daytona with uprights , hubs, or various suspension arms that were designed , machined or fabricated at our shop.
Just sayin

dastaco

First you give them crap and say that they will never produce the arms, then you give them crap AFTER they've produced and sold them.

How about, since you have nothing constructive to say EVER on the topic of Doran racing or their parts you just take your constant thread crapping elsewhere. BJ has been nothing but polite and patient with you and yet at every turn you give these guys grief.. Enough is enough Shamu.

__________________

gomer_110

Just to share what Kevin Doran told me about his philosphy on suspension component design:

The suspension component should be able to survive any abuse short of something that would bust up the wheel.

Seems pretty valid to me.

__________________
'11 370Z Nismo #528 Fast Intentions | Stillen | Motordyne | Uprev | CSF | Zspeed | Z1 Motorsports | AST | Swift | SPC | SPL | Whiteline | Hotchkis | Bride | Schroth | Robispec | Cusco | Nismo | Volk | Forgestar | Hoosier | RJM
'17 Titan Bone Stock

Dwnshift

Just remember
Hugs are free

dastaco

Unless its for a fat chick... Fat chicks gotta pay.

__________________

Imperial

So... Can I buy these yet?

cv129

And how many soft and all natural hugs will it cost to get a set?

Dwnshift

I said hugs are free...not of any actual real world monetary value!

martin82

my rear camber arm snapped yesterday at the track.... major failure, I need stuff ASAP! Something I can trust front and rear camber arms!

sig11

YOW! Didn't you have SPL camber arms? Those things are beefy.

fuct

yea martin82 what camber arms did you have?