Doran Racing NISMO RC suspension parts

DCNISMO · 05-29-2012, 08:41 PM

How about making a kit of Derlin bushings for our suspensions?

Sh0velMan · 05-29-2012, 08:56 PM

Quote:

Originally Posted by DCNISMO

How about making a kit of Derlin bushings for our suspensions?

I would purchase a kit like that. No doubt.

Sent from my SAMSUNG-SGH-I717 using Tapatalk 2

Dwnshift · 05-29-2012, 10:13 PM

We have everything designed and programmed.

Right now it's timing.... and there are other projects in line.
On the Z side.... Front control arms for instance.
We are full tilt... getting ready for Mid Ohio next week and have races June and July.
If we can have a solid run at Mid Ohio... it will help things move along more smoothly in the fabrication dept at the shop.

sig11 · 05-29-2012, 10:18 PM

Crap! Mid-Ohio already?! I was hoping to head down to watch but i'm not sure I'll make it.

Good luck!

TopElement · 06-01-2012, 02:43 PM

Quote:

Originally Posted by DCNISMO

How about making a kit of Derlin bushings for our suspensions?

For which parts?

I already have some on my Nismo.

corbin09 · 06-01-2012, 04:20 PM

TopElement.. Link to where I could purchase some nice bushings?

Sh0velMan · 06-01-2012, 09:02 PM

Quote:

Originally Posted by corbin09

TopElement.. Link to where I could purchase some nice bushings?

What he said!

ZMan8 · 06-01-2012, 11:31 PM

Quote:

Originally Posted by Sh0velMan

What he said!

+1

SPOHN · 06-02-2012, 12:27 AM

I can't believe I'm just coming across this. Very very interested in both front and rear setups. I run true type coils (always).

PM pricing

Dwnshift · 06-02-2012, 08:01 AM

Copy...
Sorry guys the shop has just been slaaaaaammed.
Everything has been noted.
This is a biiiiiiiiiiig week for us.... I can't emphasize BIG enough.
Looks like we prob won't be able to shake down the car before Thursday as there are still some odds n ends to sort out and finish.

But I do know that we will have a great weapon for the race.
If we can get through this week... and have a good race underneath our belts.. then we can start looking at $$$$ and production.
Dwnshift

ZMan8 · 06-02-2012, 03:18 PM

Quote:

Originally Posted by Dwnshift

Copy...
Sorry guys the shop has just been slaaaaaammed.
Everything has been noted.
This is a biiiiiiiiiiig week for us.... I can't emphasize BIG enough.
Looks like we prob won't be able to shake down the car before Thursday as there are still some odds n ends to sort out and finish.

But I do know that we will have a great weapon for the race.
If we can get through this week... and have a good race underneath our belts.. then we can start looking at $$$$ and production.
Dwnshift

TopElement · 06-03-2012, 02:48 AM

Quote:

Originally Posted by corbin09

TopElement.. Link to where I could purchase some nice bushings?

I have aluminum/delrin front upper arm bushings with added caster, urethane rear diff bushing, delrin rear subframe reinforcements.
Maybe delrin front lower bushings in a few months.

But I don't want to derail this thread. Perhaps we could start another thread or PM me if there's interest from the community.

Dwnshift · 06-03-2012, 01:21 PM

?????

dastaco · 06-03-2012, 01:23 PM

Quote:

Originally Posted by Baer383

Those upper control arm ball joints(if you want to call them that)won't hold up without grease ,I didn't see any fittings plus it doesn't look like a SPC,Kinetics ball joint.

Go on...

vjarnot · 06-03-2012, 03:42 PM

Quote:

Originally Posted by Baer383

But instead you guys post stupid posts but you could have been more helpful in answering the question.

Not that your post actually had a question... but I think that rather than going full assclown-defensive, maybe you could've explained the reasoning that went into the following statement:

Quote:

Originally Posted by Baer383

it doesn't look like a SPC,Kinetics ball joint.

So what? I believe that's the whole point... since apparently the others either give limited adjustment, or fail to hold over time.

06-02-2012, 12:27 AM	#39 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I can't believe I'm just coming across this. Very very interested in both front and rear setups. I run true type coils (always). PM pricing __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Sport (option) Suspension vs. Nismo suspension	355890	Brakes & Suspension	19	07-19-2022 02:04 PM
DORAN Racing Nissan Motorsports 370Z RC Continental Tire Sports Car Challenge Series	Dwnshift	Track / Autocross / Drifting / Dragstrip	134	08-20-2013 08:51 AM
Nismo RC (race car) #001 on track with Doran racing	takjak2	Track / Autocross / Drifting / Dragstrip	93	02-05-2013 08:30 AM
Wtb: Front passenger side suspension parts... All parts :)	Carbon_z	Wanted	2	01-20-2012 01:48 AM
350Z Nismo suspension VS 370Z nismo suspension	Zat_Zuma	Brakes & Suspension	10	11-12-2010 08:42 PM

05-29-2012, 08:41 PM	#31 (permalink)
DCNISMO Track Member Join Date: Nov 2011 Location: washington dc Posts: 995 Drives: Nismo Z Rep Power: 179	How about making a kit of Derlin bushings for our suspensions?

05-29-2012, 10:13 PM	#33 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	We have everything designed and programmed. Right now it's timing.... and there are other projects in line. On the Z side.... Front control arms for instance. We are full tilt... getting ready for Mid Ohio next week and have races June and July. If we can have a solid run at Mid Ohio... it will help things move along more smoothly in the fabrication dept at the shop.

05-29-2012, 10:18 PM	#34 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 18	Crap! Mid-Ohio already?! I was hoping to head down to watch but i'm not sure I'll make it. Good luck!

06-01-2012, 04:20 PM	#36 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 280	TopElement.. Link to where I could purchase some nice bushings?

06-02-2012, 08:01 AM	#40 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	Copy... Sorry guys the shop has just been slaaaaaammed. Everything has been noted. This is a biiiiiiiiiiig week for us.... I can't emphasize BIG enough. Looks like we prob won't be able to shake down the car before Thursday as there are still some odds n ends to sort out and finish. But I do know that we will have a great weapon for the race. If we can get through this week... and have a good race underneath our belts.. then we can start looking at $$$$ and production. Dwnshift

06-03-2012, 01:21 PM	#43 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	?????