SPC Arms without Toe Bolts

MattP725 · 04-23-2012, 02:16 PM

Has anyone attempted to run SPC arms and not the toe bolts? I am dropped between 1-1.5" and going for an alignment soon. I didn't get the toe bolts with the set because I bought them used.

sixpax · 04-23-2012, 02:23 PM

...stock they can get your toe to zero easily. camber is all that get's really whacked when you drop, and the arms you have will take care of that.

MattP725 · 04-23-2012, 02:27 PM

OK cool... hope you're right...worst case is I'll get the bolts seperately.

sixpax · 04-23-2012, 02:33 PM

Quote:

Originally Posted by MattP725

OK cool... hope you're right...worst case is I'll get the bolts seperately.

i think i am dropped lower than you and my toe was no big deal in the rear ... they got it close to zero with the stock adjuster with no problems. check my build thread I got a before and after alignment sheet in there somewhere showing what the toe was unadjusted.

MattP725 · 04-23-2012, 02:36 PM

Just looked at your pics and we are probably about equal although I have 19s... I never measured my stock height.

I really like your trim you used on the rear cutouts... where did you get that?

sixpax · 04-23-2012, 02:43 PM

Quote:

Originally Posted by MattP725

Just looked at your pics and we are probably about equal although I have 19s... I never measured my stock height.

I really like your trim you used on the rear cutouts... where did you get that?

...at Lowe's in the hardware department. They are called DESK GROMMETS in the nuts and bolts section, and I guess they are really to put in the top of desks for computer cables and everything to run through. I got 2 3/8" plastic ones. Pretty cheap and they cover up the holes I made pretty good.

VDC_OFF · 04-23-2012, 02:54 PM

Quote:

Originally Posted by sixpax

...at Lowe's in the hardware department. They are called DESK GROMMETS in the nuts and bolts section, and I guess they are really to put in the top of desks for computer cables and everything to run through. I got 2 3/8" plastic ones. Pretty cheap and they cover up the holes I made pretty good.

lol pretty cool idea! +1

MattP725 · 04-23-2012, 03:13 PM

Quote:

Originally Posted by VDC_OFF

lol pretty cool idea! +1

Repped as well... you should post some pics with the covers in (assuming you use them as well).

sixpax · 04-23-2012, 04:56 PM

Quote:

Originally Posted by MattP725

Repped as well... you should post some pics with the covers in (assuming you use them as well).

Unfortunately my coilover knob sticks up to far for the tops to set in there like I envisioned, they pop out. So I left it like you see in the pictures. If I could find a rubber grommet that big, and then get a smaller size desk grommet I think the tops would stay in because the rubber grommet would raise it just enough. They look OK the way they are I think.

VDC_OFF · 04-23-2012, 06:11 PM

Quote:

Originally Posted by MattP725

Repped as well... you should post some pics with the covers in (assuming you use them as well).

thanks for that! I dont have coilovers yet but I will hold on to that idea for when I do if they will need them.

modme · 04-23-2012, 02:40 PM

Although it is true that lowering the suspension mostly changes camber, rear camber adjustments changes the toe. Hopefully your toe has enough adjustment left to compensate for the camber changes.

MattP725 · 04-23-2012, 02:42 PM

OK so it sounds like it isn't exactly a science... worst case senario is I guess I am out paying for a second alignment, best case is I get away with stock toe bolts.

techfracture · 04-23-2012, 03:11 PM

The stock toe adjusters have plenty of room for adjustment. Setting the camber back near factory specs will also bring the toe back in.

MattP725 · 04-23-2012, 05:34 PM

Yeah I think they look as close to OEM as you are going to get... I wouldn't mind that at all.. plus if you ever sold the car/coilovers you could put the cap in there and it wouldn't look out of place.

zguynate · 04-25-2012, 12:44 PM

Like others have said you should be able to get away with the OEM toe adjustment. Im lowered on Swift springs and I didnt have to use toe bolts.

04-23-2012, 02:16 PM	#1 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 18	SPC Arms without Toe Bolts Has anyone attempted to run SPC arms and not the toe bolts? I am dropped between 1-1.5" and going for an alignment soon. I didn't get the toe bolts with the set because I bought them used.

04-23-2012, 02:40 PM	#11 (permalink)
modme Enthusiast Member Join Date: Mar 2009 Location: NY Posts: 345 Drives: G37 Rep Power: 17	Although it is true that lowering the suspension mostly changes camber, rear camber adjustments changes the toe. Hopefully your toe has enough adjustment left to compensate for the camber changes. __________________ GTM Twin Turbo Stage 2\|GTR Turbo/Engine Gauges\|KW V3 Coilovers\|HKS Exhaust\|Oil Cooler\| Vossen CV1

04-23-2012, 03:11 PM	#13 (permalink)
techfracture Base Member $techfracture's Avatar$ Join Date: Dec 2011 Location: Woodland Posts: 31 Drives: 1982 280ZX Turbo Rep Power: 14 $techfracture is on a distinguished road$	The stock toe adjusters have plenty of room for adjustment. Setting the camber back near factory specs will also bring the toe back in.
$techfracture is offline$

04-25-2012, 12:44 PM	#15 (permalink)
zguynate A True Z Fanatic Join Date: Jan 2012 Location: Strangeland Posts: 1,054 Drives: 09 370z Rep Power: 74	Like others have said you should be able to get away with the OEM toe adjustment. Im lowered on Swift springs and I didnt have to use toe bolts. __________________ 2009 370z touring w/sports package

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Rear arms without toe bolts	MattP725	Brakes & Suspension	8	08-06-2012 08:55 PM
[WTB] Rear camber arms/toe bolts	MattP725	Parts for sale (Private Classifieds)	0	04-05-2012 06:43 PM
[WTB] SPC Rear Camber Arms and Toe Bolts	ccdominic	Parts for sale (Private Classifieds)	13	03-23-2012 04:01 PM
[FOR SALE] NEW SPC Camber arms and toe bolts	Funky370z	Parts for sale (Private Classifieds)	3	02-26-2012 03:28 PM
[FOR SALE] FS: SPC rear camber arms w/ toe bolts	jnaut	Parts for sale (Private Classifieds)	12	09-21-2011 09:19 AM

04-23-2012, 02:27 PM	#3 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 18	OK cool... hope you're right...worst case is I'll get the bolts seperately.

04-23-2012, 02:36 PM	#5 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 18	Just looked at your pics and we are probably about equal although I have 19s... I never measured my stock height. I really like your trim you used on the rear cutouts... where did you get that?

04-23-2012, 02:42 PM	#12 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 18	OK so it sounds like it isn't exactly a science... worst case senario is I guess I am out paying for a second alignment, best case is I get away with stock toe bolts.

04-23-2012, 05:34 PM	#14 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 18	Yeah I think they look as close to OEM as you are going to get... I wouldn't mind that at all.. plus if you ever sold the car/coilovers you could put the cap in there and it wouldn't look out of place.