STILLEN brake cooling kit

ChrisSlicks · 04-24-2012, 06:20 PM

Quote:

Originally Posted by Kyle@STILLEN

Thank you very much for the excellent write-up. By the way, little racers tip, "duct tape" when used on a race car is referred to as "race tape" or "100 MPH tape." If you exceed that speed, you then refer to it as "200 MPH tape." LOL

Yep, in the army they call it 600 MPH tape and in the air force they call it 1000 MPH tape, so yeah it is good for any speed to want it to be, LOL. I've seen race cars held together by the stuff

Mike · 04-24-2012, 08:23 PM

Finished mine up today. Here is a couple shots of the fangs and front of the car with Stillen bumper.

Also, Nismo guys, in another thread Dwnshft posted the part numbers for the Nissan Motorsports ducts that you could use with this kit.

More photos going in my long lost journal thread

SPOHN · 04-24-2012, 08:24 PM

Oh yea Mike.

Mike · 04-24-2012, 08:35 PM

Going to little Talladega a week from monday and couldn't go without this kit. I had it on my avoid list, even though its one of the most fun little tracks there is, especially when its just a group of friends renting it for the day.

takjak2 · 04-26-2012, 09:59 AM

In for eagles.

sixpax · 05-07-2012, 09:34 PM

...has anyone with a Z1 Oil Cooler installed this yet ?

JB1 · 05-07-2012, 11:32 PM

Quote:

Originally Posted by sixpax

...has anyone with a Z1 Oil Cooler installed this yet ?

I'm waiting for my kit to be delivered. It will be a tight fit there where the oil lines go from oitside to inside, over the chassis rail...

ZMan8 · 05-07-2012, 11:59 PM

Quote:

Originally Posted by JB1

I'm waiting for my kit to be delivered. It will be a tight fit there where the oil lines go from oitside to inside, over the chassis rail...

Interested on this as well. I plan to get both Z1 oil cooler and stillen brake cooling.

SPOHN · 05-08-2012, 06:46 AM

My oil lines go over the frame railing and it's not a tight fit. A little cramped but not right at all.

Mike · 05-08-2012, 09:24 AM

I have a Z1 oil cooler. I did reroute my power steering lines though. Got rid of those hard pipes and run one of the lines through the same hole the oil cooler lines go through.

ZMan8 · 05-08-2012, 10:41 AM

Quote:

Originally Posted by Mike

I have a Z1 oil cooler. I did reroute my power steering lines though. Got rid of those hard pipes and run one of the lines through the same hole the oil cooler lines go through.

Good to know.

Sent from my SAMSUNG-SGH-I897 using Tapatalk 2

Germanguy · 05-12-2012, 06:40 PM

How about the coolingkit with OEM Rotors? Because the OEM Rotors are Not slotted, it will cool just One Side of the OEM discs?!

vjarnot · 05-12-2012, 07:30 PM

Quote:

Originally Posted by Germanguy

How about the coolingkit with OEM Rotors? Because the OEM Rotors are Not slotted, it will cool just One Side of the OEM discs?!

They're vented. A vented rotor is basically an air pump - pumping air from the center out the outer edge.

Germanguy · 05-13-2012, 05:29 AM

Quote:

Originally Posted by vjarnot

They're vented. A vented rotor is basically an air pump - pumping air from the center out the outer edge.

Ah great!

Someone has experience with oem rotors and the cooling kit

ChrisSlicks · 05-13-2012, 09:22 AM

Quote:

Originally Posted by Germanguy

Someone has experience with oem rotors and the cooling kit

At least 2 people are using it with the OEM brakes, SPOHN and wstar. The way it is designed it is compatible with all brake setups.

04-24-2012, 08:23 PM	#122 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Finished mine up today. Here is a couple shots of the fangs and front of the car with Stillen bumper. Also, Nismo guys, in another thread Dwnshft posted the part numbers for the Nissan Motorsports ducts that you could use with this kit. More photos going in my long lost journal thread __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

04-24-2012, 08:24 PM	#123 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Oh yea Mike. __________________

04-24-2012, 08:35 PM	#124 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	Going to little Talladega a week from monday and couldn't go without this kit. I had it on my avoid list, even though its one of the most fun little tracks there is, especially when its just a group of friends renting it for the day. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

04-26-2012, 09:59 AM	#125 (permalink)
takjak2 A True Z Fanatic Join Date: Feb 2011 Location: Sterling, VA Posts: 1,922 Drives: Legit Racecar 370Z Rep Power: 142	In for eagles. __________________ Mods \| Stuff \| Things \| Seat Time \| Nismo facebook.com/TeamSparrowSpeed

05-08-2012, 06:46 AM	#129 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	My oil lines go over the frame railing and it's not a tight fit. A little cramped but not right at all. __________________

05-08-2012, 09:24 AM	#130 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2186	I have a Z1 oil cooler. I did reroute my power steering lines though. Got rid of those hard pipes and run one of the lines through the same hole the oil cooler lines go through. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

05-12-2012, 06:40 PM	#132 (permalink)
Germanguy Base Member Join Date: Nov 2010 Location: Germany Posts: 67 Drives: 07 350z Rep Power: 15	How about the coolingkit with OEM Rotors? Because the OEM Rotors are Not slotted, it will cool just One Side of the OEM discs?!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Brake Cooling Ducts	ResIpsa	DIY Section (Do-It-Yourself)	46	07-28-2014 10:46 PM
Brake cooling ducts	lazer_Z	Brakes & Suspension	27	11-08-2011 12:17 PM
Stillen's Brake Cooling Kit	wolf370z	Brakes & Suspension	32	05-14-2011 06:51 AM
Brake Cooling Ducts?	my2004Z	Nissan 370Z General Discussions	6	05-06-2011 09:33 PM
Brake and Oil cooling question	SeattleLion	Nissan 370Z General Discussions	2	09-27-2010 12:58 AM