STILLEN brake cooling kit

flashburn · 03-22-2012, 05:22 PM

Quote:

Originally Posted by ZMan8

I'm interested about this too.

Yeah same here. I really hope they aren't going "Oh ****" right now.

ZMan8 · 03-22-2012, 05:41 PM

Quote:

Originally Posted by flashburn

Yeah same here. I really hope they aren't going "Oh ****" right now.

Kyle@STILLEN · 03-22-2012, 05:54 PM

Quote:

Originally Posted by spearfish25

Kyle,

Can you please comment on compatibility with your oil cooler kit and the lines running around the passenger side? It seems like the oil lines and brake ducting need to go through the same area.

The car we developed this kit on is our red 370Z project car which has all of our products and then some... This car has TWO oil coolers, the heat exchanger for the supercharger kit, the power steering cooler, etc. There is no problem in clearance with our oil cooler kit.

Kyle@STILLEN · 03-22-2012, 06:03 PM

By the way, I feel like it is my responsibility to throw out a "caution" before anyone decides to get creative.

When designing this product we looked at our options of materials and chose to use 304 stainless steel rather than a lesser grade and less expensive material because we did not want to have any tolerances changed by the plating thickness and/or vehicle tolerances. This area is so critical that we actually include eight 3 mm shims in case you find that your car requires additional clearance due to vehicle tolerances. Because of this, we decided to keep them non-coated and go with the 304 stainless steel.

So the caution is, on the hub backing plates, I would not suggest having these coated. In regards to the front inlets, the tolerances aren't critical with those so painting them or having them coated will make no difference. The only reason we didnt is because it would add significant cost and we wanted to keep these under $300.00. At the end of the day, once they're installed, very few people will actually see them.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY - Brake Cooling Ducts	ResIpsa	DIY Section (Do-It-Yourself)	46	07-28-2014 09:46 PM
Brake cooling ducts	lazer_Z	Brakes & Suspension	27	11-08-2011 11:17 AM
Stillen's Brake Cooling Kit	wolf370z	Brakes & Suspension	32	05-14-2011 05:51 AM
Brake Cooling Ducts?	my2004Z	Nissan 370Z General Discussions	6	05-06-2011 08:33 PM
Brake and Oil cooling question	SeattleLion	Nissan 370Z General Discussions	2	09-26-2010 11:58 PM

03-22-2012, 06:03 PM	#4 (permalink)
Kyle@STILLEN The370Z.com Sponsor Join Date: Dec 2008 Location: Newport Beach Posts: 626 Drives: Toyota Tundra Rep Power: 307	By the way, I feel like it is my responsibility to throw out a "caution" before anyone decides to get creative. When designing this product we looked at our options of materials and chose to use 304 stainless steel rather than a lesser grade and less expensive material because we did not want to have any tolerances changed by the plating thickness and/or vehicle tolerances. This area is so critical that we actually include eight 3 mm shims in case you find that your car requires additional clearance due to vehicle tolerances. Because of this, we decided to keep them non-coated and go with the 304 stainless steel. So the caution is, on the hub backing plates, I would not suggest having these coated. In regards to the front inlets, the tolerances aren't critical with those so painting them or having them coated will make no difference. The only reason we didnt is because it would add significant cost and we wanted to keep these under $300.00. At the end of the day, once they're installed, very few people will actually see them.