Spacer Advice For My Setup

Z RATED OKC · 03-06-2012, 07:07 PM

I'm considering spacers but I'm needing advice here my wheel specs are 19/9.5 in front an in the rear I have 19/10.5 an tires are 255 front, 305 in the rear the fronts already poke out just a little bit, I'm also lowered on Tein spec s any advice would be awesome Thanks

kenchan · 03-06-2012, 07:16 PM

Uh-hhhh....wats your wheel's offset??

Z RATED OKC · 03-06-2012, 07:27 PM

+17 front, +18 rear

kenchan · 03-06-2012, 08:29 PM

H&R should have 7mm stud replacement type spacers. I would get that for the rears.

gurneyeagle · 03-18-2012, 11:23 AM

Quote:

Originally Posted by kenchan

H&R should have 7mm stud replacement type spacers. I would get that for the rears.

Ken, I've searched but can't seem to find H&R 7mm DRS spacers for a Z. Do you have a source for the "search-challenged? 7MM is exacly what I need for my rear wheels.

03-06-2012, 07:07 PM	#1 (permalink)
Z RATED OKC Track Member Join Date: Feb 2011 Location: On the Prowl Posts: 656 Drives: 370z PG Rep Power: 15	Spacer Advice For My Setup I'm considering spacers but I'm needing advice here my wheel specs are 19/9.5 in front an in the rear I have 19/10.5 an tires are 255 front, 305 in the rear the fronts already poke out just a little bit, I'm also lowered on Tein spec s any advice would be awesome Thanks

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
plenum spacer/ t.b. spacer	jnaut	Intake/Exhaust	56	08-08-2013 03:57 AM
Audio setup... need advice	Astrosfan	Audio & Video	12	12-07-2011 05:55 PM
Wheel Spacer Advice	ccdominic	Wheels & Tires	10	10-06-2011 03:02 PM
Non-Bose Aftermarket Setup NEED ADVICE	Carbon_z	Audio & Video	16	11-03-2010 01:49 AM

03-06-2012, 07:16 PM	#2 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	Uh-hhhh....wats your wheel's offset??

03-06-2012, 07:27 PM	#3 (permalink)
Z RATED OKC Track Member Join Date: Feb 2011 Location: On the Prowl Posts: 656 Drives: 370z PG Rep Power: 15	+17 front, +18 rear

03-06-2012, 08:29 PM	#4 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141521	H&R should have 7mm stud replacement type spacers. I would get that for the rears.