wheel bearings?

fuct · 02-29-2012, 09:35 AM

guys/gals ive been having this click sound from each wheel when i go from a dead stop to moving. doesn't matter forward or backwards. i read somewhere on the forums we need our wheel bearings greased often... am i wrong? im doing my brakes this weekend and would love to just repack the grease while im working in there. is this possible or do i need special equipment to service these bearings?

or is it the bearings at all????? :\

Red__Zed · 02-29-2012, 10:15 AM

Clicking is probably CVs....they are notorious for making a clicking noise from a stop.

fuct · 02-29-2012, 10:37 AM

ahhh. sooo i need to look into new ones or what?

corbin09 · 02-29-2012, 11:20 AM

If I remember correctly the CV's clicking was on the 350z too. I am pretty sure it wasnt an issue, just an annoyance. They clicked on my 350z for years, but everytime I took it in my mech said it looked fine.

fuct · 02-29-2012, 11:49 AM

thx corbin.

yea i notice no performance issues just an annoying click. as long as im not damaging anything i can live with it.

ChrisSlicks · 02-29-2012, 12:13 PM

If the click is only from the rear then it is probably the CV joints as corbin said. I had the same click on the G35 and they fixed it under warranty by removing the axles, greasing the splines and re-installing with the splines rotated 180 degrees.

I don't think you can easily re-grease the wheel bearings as they are a sealed unit. Sometimes it is possible to disassemble them anyway but I haven't tried yet.

Red__Zed · 02-29-2012, 12:17 PM

Quote:

Originally Posted by fuct

ahhh. sooo i need to look into new ones or what?

Don't need to replace....just an annoyance.

If you replace them you usually wind up with the same click again.

Drodriguez06 · 02-29-2012, 01:41 PM

I had to replace the bearings on my G35 and it wasn't a clicking sound it was more like a humming sound like something was rubbing against the tire... So don't think that's it, like Corbin and Chis said its probally the CV

erkthejerk73 · 02-29-2012, 01:55 PM

do you have sway bars? mine were popping from the grease being really $hitty that was provided with them. regreased and the pop went away!

fuct · 02-29-2012, 02:06 PM

nope, just tein springs and spacers. its a def a CLICK! and the sound never changes tone or volume. just the same CLICK each time i take off or reverse. i searched on here and the rear click is most likely the CV, the front i duno.....

Axel clicking on FI cars

Naum16 · 03-18-2013, 10:56 AM

Hello my name is Naum and i have an 09 370z touring i recently got into an accident, i side wipped a tree ay 25-30 mph. Body work was fixed but then they ran into a crack engine cradle/subframe also the steering rack had a crack. They also replaced a wheel bearing to the left side steering wheel. i got the car fixed and told that there shouldnt be anymore problems but everytime i break at slow speeds theres a popping noise cant really tell what it is but it sounds like something under the car or the brakes. It feels like the dealer auto body keeps messing with my car its been so far 10k in repairs can anyone please let me know what to do. It feels like if i take it back again which i will do something else will be wrong with it. help please

02-29-2012, 09:35 AM	#1 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	wheel bearings? guys/gals ive been having this click sound from each wheel when i go from a dead stop to moving. doesn't matter forward or backwards. i read somewhere on the forums we need our wheel bearings greased often... am i wrong? im doing my brakes this weekend and would love to just repack the grease while im working in there. is this possible or do i need special equipment to service these bearings? or is it the bearings at all????? :\

02-29-2012, 12:13 PM	#6 (permalink)
ChrisSlicks A True Z Fanatic Join Date: Mar 2009 Location: North East Posts: 6,203 Drives: 09 370Z Sport M6 Rep Power: 653	If the click is only from the rear then it is probably the CV joints as corbin said. I had the same click on the G35 and they fixed it under warranty by removing the axles, greasing the splines and re-installing with the splines rotated 180 degrees. I don't think you can easily re-grease the wheel bearings as they are a sealed unit. Sometimes it is possible to disassemble them anyway but I haven't tried yet. __________________ Hotchkis ARB \| Stillen CAI \| Art Pipes \| Berk CBE \| Stillen AP Racing Brakes \| AE Performance Oil Cooler \| BC Racing ER Coilovers \| Doran Control Arms Last edited by ChrisSlicks; 04-19-2013 at 10:39 AM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering wheel controls and aftermarket wheel	Perf.Des	Exterior & Interior	11	03-03-2012 03:29 PM
[WTB] Oem sports wheel trade for after market wheel	azn_kiddd	Parts for sale (Private Classifieds)	6	11-23-2011 06:02 PM
wheel/steering wheel shake	dbayb	Wheels & Tires	12	10-22-2011 08:59 AM
Big End and Main Bearings	Donavan	Engine & Drivetrain	0	07-05-2011 08:43 AM
Throw back bearings making NOISE AGAIN	Carbon_z	Engine & Drivetrain	23	10-22-2009 06:06 PM

02-29-2012, 10:15 AM	#2 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 120	Clicking is probably CVs....they are notorious for making a clicking noise from a stop.

02-29-2012, 10:37 AM	#3 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	ahhh. sooo i need to look into new ones or what?

02-29-2012, 11:20 AM	#4 (permalink)
corbin09 Track Member Join Date: Jun 2009 Location: Dallas tx Posts: 665 Drives: 370z Rep Power: 280	If I remember correctly the CV's clicking was on the 350z too. I am pretty sure it wasnt an issue, just an annoyance. They clicked on my 350z for years, but everytime I took it in my mech said it looked fine.

02-29-2012, 11:49 AM	#5 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	thx corbin. yea i notice no performance issues just an annoying click. as long as im not damaging anything i can live with it.

02-29-2012, 01:41 PM	#8 (permalink)
Drodriguez06 Base Member Join Date: Feb 2012 Location: Arlington, TX Posts: 84 Drives: 370z / S14kouki Rep Power: 13	I had to replace the bearings on my G35 and it wasn't a clicking sound it was more like a humming sound like something was rubbing against the tire... So don't think that's it, like Corbin and Chis said its probally the CV

02-29-2012, 01:55 PM	#9 (permalink)
erkthejerk73 Track Member Join Date: Mar 2011 Location: cincinnati Posts: 927 Drives: 13 F150 FX4 eb Rep Power: 15	do you have sway bars? mine were popping from the grease being really $hitty that was provided with them. regreased and the pop went away!

02-29-2012, 02:06 PM	#10 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	nope, just tein springs and spacers. its a def a CLICK! and the sound never changes tone or volume. just the same CLICK each time i take off or reverse. i searched on here and the rear click is most likely the CV, the front i duno..... Axel clicking on FI cars

03-18-2013, 10:56 AM	#11 (permalink)
Naum16 Base Member Join Date: Mar 2013 Location: IN Posts: 152 Drives: 09 370z Rep Power: 12	Hello my name is Naum and i have an 09 370z touring i recently got into an accident, i side wipped a tree ay 25-30 mph. Body work was fixed but then they ran into a crack engine cradle/subframe also the steering rack had a crack. They also replaced a wheel bearing to the left side steering wheel. i got the car fixed and told that there shouldnt be anymore problems but everytime i break at slow speeds theres a popping noise cant really tell what it is but it sounds like something under the car or the brakes. It feels like the dealer auto body keeps messing with my car its been so far 10k in repairs can anyone please let me know what to do. It feels like if i take it back again which i will do something else will be wrong with it. help please