Coilover Access Holes in Rear Cargo Area

axio · 03-01-2012, 04:20 PM

Yeah, I have the BC ER with extenders, hence the 3/4" holes

Quote:

Originally Posted by sixpax

3/4 ain't very big at all. i am not sure if I could fit my hand in a hole that small to twirl the knob around. unless you just did holes for extenders like on BC.

bullitt5897 · 03-01-2012, 05:40 PM

You guys know I did this back in the day when HKS came out with their Hipermax III's

bullitt5897 · 03-01-2012, 05:42 PM

I eyed it and did it by hand

perfect circles with a decent dremel.

sixpax · 03-01-2012, 05:44 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

I eyed it and did it by hand

perfect circles with a decent dremel.

damn that's looks pretty good. appears the holes are about dead center of that flat spot on top ....

Baer383 · 03-01-2012, 06:30 PM

Are you referring to these kind of holes?

sixpax · 03-01-2012, 06:43 PM

Quote:

Originally Posted by Baer383

Are you referring to these kind of holes?

Now that sir, is top notch, Grade A, spectacular godliness.

vividracing · 03-01-2012, 06:45 PM

Baer, your damper knobs look great!

UAM- Did you have some sort of cover for the holes? They really detract from the rest of your hatch area.

fyi guys, Ksport and BC both have extensions.

sixpax · 03-01-2012, 06:47 PM

Quote:

Originally Posted by vividracing

Baer, your damper knobs look great!

UAM- Did you have some sort of cover for the holes? They really detract from the rest of your hatch area.

fyi guys, Ksport and BC both have extensions.

Both great coilover choices ... but I am going to slap some Ark DT-P's on, so no extenders for me

Baer383 · 03-01-2012, 06:51 PM

Quote:

Originally Posted by vividracing

Baer, your damper knobs look great!

UAM- Did you have some sort of cover for the holes? They really detract from the rest of your hatch area.

fyi guys, Ksport and BC both have extensions.

Thanks

My coil overs are BC ER and what you seeing is the extension but trimmed to fit.

sixpax · 03-01-2012, 06:59 PM

Quote:

Originally Posted by Bullitt@UAMotorsports

I eyed it and did it by hand

perfect circles with a decent dremel.

I think your way is fine if I found some sort of rubber/plastic plug with a pull tab on it ... pop it in and pop it out.

axio · 03-01-2012, 07:09 PM

Damn, Baer, those look great. I tried doing that too but the part of the extensions that connect to the coilover itself, it would push up against the interior body panel, so i had to cut it out a little wider than that.

Baer383 · 03-01-2012, 07:13 PM

Quote:

Originally Posted by axio

Damn, Baer, those look great. I tried doing that too but the part of the extensions that connect to the coilover itself, it would push up against the interior body panel, so i had to cut it out a little wider than that.

Yeah mine was very hard to turn so I took out the black sleeve and use the outer part of a black Bic pen which was a little smaller in dia. and kept trimming then lubed everything up before assembly ,now it turns smooth and easy.

bullitt5897 · 03-02-2012, 11:43 AM

Yeah I have a cover for the tops the problem we had is HKS didnt have extenders and I needed to be able to get my big hands in there to make adjustments.

djtodd · 10-12-2012, 02:01 PM

I've seen people use the desk grommets (the 2-3" black plastic grommets for running cables through desks) before and it looked pretty good.
Plus, they come with covers/inserts, so it's clean when you aren't adjusting...

03-01-2012, 05:42 PM	#18 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	I eyed it and did it by hand perfect circles with a decent dremel. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

03-01-2012, 06:30 PM	#20 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 30	Are you referring to these kind of holes? 6MT-Z34 likes this. __________________ 2013 ZL1 754 rwhp 747 rwtq

03-01-2012, 06:45 PM	#22 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 38 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 39	Baer, your damper knobs look great! UAM- Did you have some sort of cover for the holes? They really detract from the rest of your hatch area. fyi guys, Ksport and BC both have extensions. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

03-01-2012, 07:09 PM	#26 (permalink)
axio Enthusiast Member Join Date: Jan 2009 Location: SF Bay Area, CA Posts: 271 Drives: '09 370Z Rep Power: 17	Damn, Baer, those look great. I tried doing that too but the part of the extensions that connect to the coilover itself, it would push up against the interior body panel, so i had to cut it out a little wider than that. __________________ GTM Stg II SC w/ Aquamist methanol injection, GTM oil cooler, Berk HFC, Stillen CBE, BC ER coilovers, Hotchkis sways, TWM short shifter, Clutch spring mod, CarboTech XP8s

03-02-2012, 11:43 AM	#28 (permalink)
bullitt5897 Premium Member Join Date: Jan 2009 Location: North GA Posts: 6,831 Drives: Twin Turbo Z34 Rep Power: 3683	Yeah I have a cover for the tops the problem we had is HKS didnt have extenders and I needed to be able to get my big hands in there to make adjustments. __________________ *Shop Cars: 2013 318whp Nismo VspecII 370z SOLD, 2009 1000hp+ 93oct 4.0L TT 370z Fast Intentions STAGE 4 #054*

10-12-2012, 02:01 PM	#29 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3398	I've seen people use the desk grommets (the 2-3" black plastic grommets for running cables through desks) before and it looked pretty good. Plus, they come with covers/inserts, so it's clean when you aren't adjusting...

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[WTB] WTB - Rear Cargo Cover.	kyleinwa	Parts for sale (Private Classifieds)	12	02-21-2012 09:20 PM
Rear Cargo Cover	koffeegy	Exterior & Interior	11	02-18-2012 08:23 AM
[FOR SALE] Rear cargo cover	mspaun3	Parts for sale (Private Classifieds)	3	12-25-2011 06:06 AM
Access to rear fender from hatch	tjlazer	Exterior & Interior	2	06-23-2010 04:14 PM
WTB: Rear Cargo Cover	djward	Wanted	0	03-10-2010 10:46 PM